• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.511-514
• /
• 1997

The objective of this study is to propose a finite element based design of the dental implant replacing unction and shape of natural teeth. For this, geometric actors were varied to investigate stress distribution of the alveolar bone around dental implant. In this study, the results were obtained based on the theory of linear elastic, with geometrically axisymmetric assumption. Geometric actors determining implant shape are ranged as 0.2mm-0.6mm, 0.04mm-0.1mm, 0.46mm-0.84mm or height of thread, radius of curvature of thread, and pitch, respectively. The stresses in the alveolar bone caused by biting force playa major role in determining implant stability. Especially, the stress concentration in the cortical bone causes bone resorption and finally makes the implant unstable. Therefore, the stress distributions were investigated on the side of the alveolar bone focusing on the area of cortical bone. The maximum von Mises stress was found to increase up to 6% as the height of thread increases, while its value was to decrease to 19% when the radius of curvature increase within the assigned ranges. For the variation of pitch, the larger size of pitch results in greater maximum von Mises stress when the length of the implant under consideration is fixed. The existence of the neck below the shoulder did not affect the stress distribution in the region of alveolar bone. However, the stresses on the side of the implant near the neck were found to be different by 20% approximately. Therefore, the neck can provide the stability of the implant against continuing biting movement. As a conclusion, the finite element based study shows a potential in designing the dental implant systematically.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.5
• /
• pp.587-598
• /
• 2005

Statement of problem: Ceramic restorations should be made of porcelain layers of different opacity, shade, and thickness in order to provide a natural appearance. Lithium disilicate glass-ceramic system has superior color reproducibility, because it uses the ceramic ingot which is similar to teeth shade and uses the staining technique and layering technique. However, staining technique has a fault of discoloration. Also, porcelain is divided core and dentin layer, it is not enough to study about the influence of porcelain layer thickness and shade on the shade of ceramic restorations. Purpose: The purpose of this study was to evaluate the influence of porcelain layer thickness and color on the final shade of ceramic restorations. Materials and method: The CIE $L^*a^*b^*$(CIELAB) values of 72 assembled specimens, each consisting of 3 discs (enamel porcelain 0.2 mm/dentin porcelain -1.2, 0.9, 0.7, 0.5 or 0.3 mm/ceramic core -0.3, 0.5, 0.7, 0.9 or 1.2 mm, diameter is 1.0 mm) were evaluated with a spectrophotometer (Model Chromaview 300, Spectron Tech Co, Korea) for the shade A1, A2, A3 and A4. Distilled water (refractive index: 1.7) was used to attain optical contact between the layers. White, white gray, and white brown backgrounds were used to assess the influence of the background on the final shade. And the mean color difference value$({\Delta}E)$ was calculated. Results and conclusion: The results obtained from this study were as follows. 1. There was a significant correlation between the thickness ratio of the ceramic core/dentin porcelain system and $L^*,\;a^*\;and\;b^*$ values when the total thickness of specimen combination was smaller than 1.4 mm(P<0.05). 2. The specimen which the ceramic core thickness was more than 0.7 mm had the best masking effect against background colors. 3. The mean color difference value$({\Delta}E)$ is smaller than 2 $({\Delta}E<2)$ when the ceramic core thickness was larger than 0.7 mm and the total thickness of specimen was more than 1.4 mm.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.6
• /
• pp.545-559
• /
• 2002

There has been increasing use of IPS Empress $2^{(R)}$ owing to easy fabrication method, high esthetics similar to natural teeth, good marginal accuracy, and sufficient fracture strength. However, in clinical application, although a luting agent and the tooth cementation bonding procedure influence the marginal accuracy and fracture strength restoration, there has been a controversy in the selection of proper luting agent. This study was to measure the marginal fidelites and fracture strength of IPS Empress crowns according to three cement types, Protec $cem^{(R)}$, Variolink $II^{(R)}$ and Panavia $21^{(R)}$. After construction of 12 experimental dies for each group, IPS Empress $2^{(R)}$ crowns were fabricated and luted the metal master die prepartion of the maxillary right premolar. Marginal gaps before cementation and after cementation were measured. Buccal incline on the functional cusp of specimens were loaded until the catastrophic failure and fracture strength was measured. The results of this study were as follows: 1. The range of gap was $34.04{\pm}4.84{\mu}m$ before cementation and $37.88{\pm}5.00{\mu}m$ after cementation, which showed significant difference by paired t-test (p<0.05). The difference in the results from marginal accuracy according to measuring point proved to be not statistically significant by two-way ANOVA test (p>0.05). 2. The difference in the results from marginal accuracy according to three cement types Proved that The Variolink $II^{(R)}$ cement group had the least gap, $35.43{\pm}5.03{\mu}m$, and showed superior marginal accuracy while there existed statistic significance in Protec $cem^{(R)}$ cement group, $39.06{\pm}4.41{\mu}m$ or Panavia $21^{(R)}$ cement group, $39.16{\pm}4.39{\mu}m$ by two-way ANOVA test & multiple range test (p<0.05). 3. The difference in the results from fractures strength testing according to three cement type groups proved to be statistically significant (p<0.05). The Variolink $II^{(R)}$ cement group shows highest fracture strength of $1257.33{\pm}226.77N$, Panavia $21^{(R)}$ cement group has $1098.08{\pm}138.45N$, and Protec $cem^{(R)}$ cement group represents the lowest fracture strength of $926.75{\pm}115.75N$. 4. Three different cement groups of different components showed acceptable marginal fidelity and fracture strength. It is concluded that IPS Empress $2^{(R)}$ crowns luted using Variolink $II^{(R)}$ cement group had stronger fracture strength and smaller marginal gap than the other cement groups. Although Variolink $II^{(R)}$ resin cement seemed acceptable to clinical applications in IPS Empress $2^{(R)}$ system, the IPS Empress $2^{(R)}$ system still requires long-term research due to the lack of data in clinical applications.

• The korean journal of orthodontics
• /
• v.30 no.4 s.81
• /
• pp.483-490
• /
• 2000

The dental gold alloy shows a lower bond strength than the natural teeth in bracket bonding, and this can be a possible source of subsequent bond failure. This study aims to evaluate the effect of various gold alloy surface treatment techniques on shear bond strength between the orthodontic adhesives and the gold alloy and to find ways of increasing the bond strength. Two hundred and forty specimens made of the dental fold alloy were divided into twelve groups based on the combination of surface treatment methods(non-surface treatment, sandblasted, sandblasted plus tin-plated, and sandblasted plus intermediate adhesive) and adhesive systems (Ortho-one, Panavia 21, Superbond C&B). The specimens with bonded brackets were placed in distilled water at $37^{\circ}C$ for 24 hours and shear bond strength was measured by a universal testing machine. The results were as follows: 1. All surface-treated groups showed a significantly higher shear bond strength than non-surface-treated groups. 2. The sandblasted plus tin-plated group showed a significantly higher shear bond strength than the sandblasted group only when Panavia 21 was involved. 3. The sandblasted plus intermediate adhesive group showed a significantly higher shear bond strength than sandblasted group regardless of the type of adhesive used. 4. Of the three resin adhesive types, the Superbond C&B showed the highest bond strength, followed by Panavia 21 and Ortho-one. These findings suggest that a combination of sandblasting and intermediate resin treatment is desirable in order to enhance bracket bond strength regardless of adhesive types.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.3
• /
• pp.169-183
• /
• 2003

According to our recent investigation that the increase in the occlusal vertical dimension made the appendage muscle strength got higher, the occlusal appliances were made by increasing the occlusal vertical dimension "from the centric relation" position of the mandible. In this experiment, the authors tried to study the change in the appendage muscle strength due to increase in occlusal vertical dimension from intercuspal position(ICP) of mandible with the same subjects and manner as the former experiment. For this study, ten male athletes in a mean age of 23 year who were joined the former study were selected. All the subjects had a complete or almost complete set of natural teeth and reported no subjective symptoms of temporomandibular disorders. Upper and lower casts were mounted on the semi-adjustable articulator at the intercuspal position and a point was marked on the attached gingival area between the right canine and the right 1st. premolar in each upper and lower cast. From the points, the occlusal vertical dimension was increased by 2mm, 3.5mm and 5mm, and then each 10 maxillary type occlusal splint at each 3-increased position were fabricated with heat curing clear acrylic resin. Including the intercuspal position, the 3 kinds of occlusal splints were placed on the subjects individually, and then isokinetic muscle strength on 7 parts of the human appendage which are shoulder, knee, ankle, wrist, forearm, elbow and hip was measured with the CYBEX 6000 SYSTEM (Lumex, NewYork, USA). The results were as follows: The highest mean value in muscular strength was shown at the position of 2mm-increased vertical dimension. The muscle strength during internal/external rotation of shoulder and knee, plantarflexion of ankle, flexion of elbow, and flexion and extension of hip at the increased occlusal vertical dimension position were significantly higher than them at the intercuspal position (p<0.05). Only in view of the increase in the appendage muscle strength, regardless of the way of making the occlusal splints by elevating the occlusal vertical dimension from the centric relation position or intercuspal position, the occlusal splints had an effect on the increase of isokinetic muscle strength at the occlusal vertical dimension which increased within the proper range on the habitual arc of closure.

• Applied Microscopy
• /
• v.29 no.2
• /
• pp.189-193
• /
• 1999

The response of ameloblast to long term (3 weeks) exposure to fluoride was examined in continuously erupting mandibular incisors of pregnancy rats as compared to control rats receiving a similar diet (Teklad L-356) but no sodium fluoride in there drinking water. Rats were started on water containing 0 ppm, 100 ppm, 200 ppm, and 300 ppm NaF at the beginning of pregnancy. To examine on the ultrastructural changes of the ameloblast, electron microscopy was used. The results indicated that rat incisors expressed two major changes in normal amelogenesis that could be attributed to chronic fluoride treatment. The fluoride produces marked alteration in the fine structure of ameloblast from teeth of young rats, such as large confluent distensions of the endoplasmic reticulum and swelling of isolated mitochondria, in particular on the morphology of the rough-surfaced endoplasmic reticulum. A graded series of alterations to these organelles were produced, and the severity of the changes would seem to be dependent on dose and time. This experimental data suggested that exposure prolonged of animal to high level of fluoride appears to induce morphological changes in the normal appositional growth and initial mineralization of enamel created during amelogenesis.

• Cross-Cultural Studies
• /
• v.27
• /
• pp.59-79
• /
• 2012

China and Japan are geographically close and the two countries had shared the Chinese Character Culture and the thoughts of Confucianism, Buddhism and Taoism since the ancient age. They also actively exchanged culture in various areas. Some cultural exchanges had been caused by surrounding environment and culture had been introduced to other country in a natural way; while some cultural exchanges had been forcibly introduced through artificial process. It is believed that such cultural phenomenon must have had impact on the make-up cultures of the two countries and it was assumed that there must have been commons and differences in the make-up cultures of the two countries. This study explored the historical background of the Ching dynasty of China and the Edo Age in Japan, which are in the same time frame, and studied the aesthetic consciousness of the two countries at the time. Then the make-up style of ladies in the two countries had been studied to find out how their aesthetic consciousnesses had been expressed in the make-ups of the two countries. Then the commons and differences in make-up skills between the two countries had been identified. According to the study results, the main stream of aesthetics during the Ching dynasty in China can be classified into Confucianism aesthetics and Taoism aesthetics. On the other hand, the main stream of aesthetics during the Edo Age in Japan can be classified into "mitate(見立)", "ikki(いき)" and "garumi(かるみ). The skin care in the make-up culture of Ching dynasty in China was based on "rouge (?脂, yanzhi)" and "powder(粉, fen)". The Ching ladies loved the make-up style using rouge. It had been same both in the high society and common people. The eyebrow care was delicate and curved so that the feminine beauty with elegant spirit could be emphasized. The lips had been expressed to be smaller and the ladies tried to express elegance and reliability, rather than frail and tender feminine image. The skin care in the make-up culture of Edo Age in Japan focused on even applying of white powder so that the face would look soft. The eyebrow make-up was a very important part of the make-up. The shapes of eyebrow had been advanced in various styles and there had been eyebrow make-up styles such as "crescent-shaped brow (三日月), "crane style brow (鶴眉) and "Tang style brow (唐眉). The lips had been applied of thick red color, imitating the make-up skill of the ladies in the entertainment business. The lips make-up skill expressing the lips in two colors had been quite popular. Among the make-up skills during the Edo Age in Japan, the "black teeth (齒黑)" can be said as the most unique make-up style of Edo Age.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.303-310
• /
• 2019

The purpose of this study was to compare the oralmyofunctions (occlusal force, tongue pressure, lip force) of adults and elderly people. And analyzed the factors affecting oral health related quality of life and dysphagia. The study was conducted on 73(over 20 years of age) Residing in Daejeon and Nonsan From December 2017 to May 2018. The data was analyzed using one-way ANOVA, pearson's correlation and multiple regression. The masticatory strength of each age group evaluated the right and left posterior occlusal forces. the elderys group (8.93, 10.80) were lower than adults group(12.51, 14.61) and middle age group(11.63, 14.75)(p>0.05). The tongue pressure was statistically significant lower in eldery group(37.43) than the adult group(60.55), middle-aged group(50.61) (p=0.000). In addition lip force was significantly lower in eldery group(8.57) than adult(12.01), middle-aged(11.37)(p= 0.000). The tongue pressure was positively correlated with the number of natural teeth(r=.566, p<.05), and the lip force (r=.497, p<.05). The quality of life quality related to oral health and dysphagia was tongue strength(p<0.05). It is necessary to recognize the risk of declining oral muscle function caused by aging. especially tongue strength is associated with quality of life and dysphagia. In order to improve the quality of life related to oral health in the aged society, the necessity of regular oral administration and oral muscle training was proposed.

• Journal of Periodontal and Implant Science
• /
• v.51 no.1
• /
• pp.53-62
• /
• 2021

Purpose: This study aimed to evaluate the clinical and microbiological efficacy of adjunctive local delivery of minocycline (Periocline^®) in patients receiving supportive periodontal therapy (SPT) after initial treatment. Methods: The participants were 16 men and 8 women (age, 20-65 years) who had at least 15 natural teeth, underwent SPT for more than 1 year due to chronic periodontitis, had 4 or more periodontal pocket sites deeper than 5 mm, and showed >25% gingival bleeding on probing (BoP). They were randomly assigned to the test and control groups. In the test group, mechanical debridement and local antibiotic delivery were performed for all periodontal sulci/pockets; in the control group, mechanical debridement and saline irrigation were performed. In patients who underwent SPT for more than 1 year, clinical and microbiological examinations were performed at baseline and 1 and 3 months after SPT. The clinical examination included an assessment of the periodontal pocket depth, clinical attachment level, plaque index, and BoP. Microbial tests were performed using real-time polymerase chain reaction; the relative ratios of Porphyromonas gingivalis and Fusobacterium nucleatum were determined. Results: Both groups showed significant improvements in clinical parameters at 1 and 3 months from baseline; there were no significant changes between months 1 and 3. Intergroup differences were insignificant. The microbiological analysis revealed no significant differences in P. gingivalis and F. nucleatum ratios across time points. While intergroup differences were insignificant, there was a tendency for the P. gingivalis and F. nucleatum ratios to decrease in the test group. Conclusions: Mechanical debridement in patients receiving maintenance therapy resulted in clinically significant improvement; the effectiveness of additional local delivery of antibiotics was not significant. The ratios of P. gingivalis and F. nucleatum showed a tendency to decrease in the test group, although it was not significant.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.2
• /
• pp.168-174
• /
• 2022

In case of gingival recession or bone defect in maxillary anterior implant treatment, it is not easy to obtain satisfactory clinical results. In this case, loss of the labial alveolar plate was diagnosed in the maxillary right central incisor, so after tooth extraction, soft tissue was secured and implant placement with bone graft was planned. In addition, digital guide surgery was performed for the ideal implant position, and GBR (Guided Bone Regeneration) was accompanied with the xenogeneic bone and the autologous bone collected from the mandibular ramus since alveolar bone defects were extensive. After a sufficient period of osseointegration of the implant, a temporary prosthesis was fabricated through secondary stage surgery and impression taking, and through periodic external adjustment, the shape of soft tissue was improved. In the final prosthesis fabrication, a color tone of natural teeth was induced by an gold anodized customized abutment, and an aesthetic and functional zirconia prosthesis with reproducing the shape of the temporary prosthesis through intraoral scan was delivered.