• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1995년도 제8회 학술발표회 논문개요집
• /
• pp.36-36
• /
• 1995

The cubic (zinc blende) CdSe eppilayers were grown on GaAs(100) substrates by electron beam (e-beam) evapporation technique. X-ray scans with copper $K\alpha$ radiation indicate that the CdSe eppilayers are zinc blende. The lattice pparameter obtained from the (400) reflection is 6.077$\AA$, which is in excellent agreement with the value repported in the literature for zinc blende CdSe. The orientation of as-grown CdSe eppilayer is determined by electron channeling ppatterns(ECpp). The crystallinity of heteroeppitaxial CdSe layers were investigated based on the double crystal x-ray rocking curve(DCRC). The deppendence of the rocking curve width on layer thickness was studied. The FWHM(full width at half maximum) of CdSe eppilayers grown on GaAs(100) substrates is decreasing with increasing eppilayer thickness. The carrier concentration and mobility of the as-grown eppilayers deduced Hall data by van der ppauw method, are about 7$\times$1017 cm-3 and 2$\times$102 $\textrm{cm}^2$ / sec at room tempperature, resppectively. The energy gapp was determinded from the pphotocurrent sppectrum. In pphotocurrent sppectrum of a 1-${\mu}{\textrm}{m}$-thick CdSe eppilayer at 30K, the ppeak at 1.746 eV is due to the free exciton of cubic CdSe. In summary, We have shown that eppilayers of zinc blende CdSe can be grown on GaAs(100) substrates by e-beam, desppite the large mismatch between eppilayer and substrate, as well as the natural ppreference for CdSe to form in the wurtzite structure.

• 생물환경조절학회지
• /
• 제10권2호
• /
• pp.95-100
• /
• 2001

본 연구에서는 팽연화왕겨를 이용한 토마토 양액재배시 높은 근권 pH를 적정 수준으로 유지학 위해 공급배양액의 pH를 낮추는 방안과 배지 내에 pH 3.0∼4.0 수준의 sphagnum peatmoss를 혼합하는 두 가지 방법을 시도하였다. 급액 pH를 낮추는 방법은 근권 pH의 경시적 변화가 매우 커서 뿌리에 장해가 있는 것으로 판단되며, 유의성은 없으나 수량이 약간 감소하는 경향을 보였다. Spagnunm peatmoss를 혼합하는 방법은 10%(v/v) 혼합처리에서 안정적인 pH 수준이 생육 전기간에 걸쳐 유지되었으며 수분 특성 개선 등의 부수적인 효과가 있어 유의성 있는 증수 효과를 보여 팽연화왕결르 이용한 양액재배시 높은 근권 pH의 문제는 sphagnum peatmoss를 10%(v/v) 혼합하는 처리로 해결할 수 있을 것으로 판단되었다.

• 한국균학회지
• /
• 제18권4호
• /
• pp.209-217
• /
• 1990

Aspergillus niger에 있어서 여러가지 섬유질 기질이 세포내외의 섬유질 분해효소계의 생합성 및 동질효소의 양상에 미치는 영향을 조사하였다. Cellulase 및 xylanase 효소계의 생합성은 사용된 기질에 따라 큰 차이가 있었으며, 특히 cellulase 효소계의 CMCase와 ${\beta}-glucosidase$는 혼합기질의 사용시 효소활성이 증진되는 기질의 공조효과를 보였다. 또한 기질에 따라 섬유질분해효소계 동질효소의 생성 양상이 다르게 나타났으나 세포내외간 동질효소 양상의 차이는 발견되지 않았으며 배양시간에 따른 동질효소의 변화도 없었다. 이러한 결과들은 A. niger의 cellulase 및 xylanase효소계의 생합성은 기질에 의한 효소의 유도 수준에서 상호 연관적으로 조절되어짐을 보여주며, 세포외 효소에서 나타나는 multiple-isozyme의 형성이 합성되어진 효소의 post-secretional modification에 의한 결과라기 보다는 각각의 유전자 발현 결과에 의한 것임을 시사한다.

• Journal of Applied Biological Chemistry
• /
• 제48권3호
• /
• pp.113-119
• /
• 2005

O-methylation mediated by O-methyltransferases (OMTs) is a common modification in natural product biosynthesis and contributes to diversity of secondary metabolites. OMTs use phenylpropanoids, flavonoids, other phenolics and alkaloids as substrates, and share common domains for S-adenosyl-L-methionine (AdoMet) and substrate binding. We searched Arabiposis genome and found 17 OMTs genes (AtOMTs). AdoMet- and substrate-binding sites were predicted. AdoMet binding domain of AtOMTs is highly conserved, while substrate-binding domain is diverse, indicating use of different substrates. In addition, expressions of six AtOMT genes in response to UV and in different tissues were investigated using real-time quantitative reverse transcriptase-polymerase chain reaction. All the AtOMTs investigated were expressed under normal growth condition and most, except AtOMT10, were induced after UV illumination. AtOMT1 and AtOMT8 were expressed in all the tissues, whereas AtOMT10 showed flower-specific expression. Analysis of these AtOMT gene expressions could provide some clues on AtOMT involvement in the cellular processes.

• Corrosion Science and Technology
• /
• 제8권3호
• /
• pp.93-102
• /
• 2009

The direct-current electroetching of high purity aluminum in hot aqueous-chloride solution produces a high density of micrometer-wide tunnels whose walls are made up of the {100} planes and penetrate aluminum in the <100> directions at rates of micrometer per second. In the process of the alternating-current pitting of aluminum, cathodic polarization plays an important role in the nucleation and growth of the pits during the subsequent polarization. The direct-current tunnel etching and alternating-current etching of aluminum are basically related to the formation of poorly crystallized or amorphous passive films. If the passive film forms on the wall, a natural misfit exists between the film and the aluminum substrate, which in turn gives rise to stress in both the film and the substrate. Even though the amorphous films do not have directed properties, their stresses are influenced by the substrate orientation. The films on elastically soft substrate are likely to be less stressed and more stable than those on elastically hard substrate. The hardest and softest planes of aluminum are the {111} and {100} planes, respectively. Therefore, the films on the {111} substrates are most likely to be attacked, and those on the {100} substrates are least likely to be attacked. For the tunnel etching, it follows that the tunnel walls tend to consist of the {100} planes. Meanwhile, the tunnel tip, where active corrosion takes place, tend to be made of four closely packed {111} planes in order to minimize the surface energy, which gives rise to the <100> tunnel etching.

• 한국수산과학회지
• /
• 제38권6호
• /
• pp.393-398
• /
• 2005

Codium fragile is commercially farmed in Korea by natural blooming zygote attachment. Experiments found optimum conditions for artificial seed production and nursery culture of C. fragile by asexual reproduction. Isolated utricles and medullary filaments were regenerated to erect thalli using both indoor and outdoor culture experiments. Under the indoor culture conditions, irradiance was an important factor to control the development of erect thalli. Formation of erect thallus from the isolated medullary filaments in the indoor culture was induced after 30 days under $20^{\circ}C$ and $60{\mu}mol/m^2/sec$. The detachment of isolated utricles and medullary filaments from the substrates of seed strings was reduced by exposure to the air during 2 hrs before the indoor culture of seed strings. The maximum growth and development of erect thalli in the nursery culture was induced at a water depth of 0.5 m. Depending on the substrates of the seed strings the growth of erect thalli was not significantly different (p>0.05).

• Animal cells and systems
• /
• 제16권6호
• /
• pp.479-487
• /
• 2012

Biological attachment device is optimized in insect legs for attachment onto the variety of natural substrate. We have studied the microstructural characteristics of the tarsal appendages in the ladybug Harmonia axyridis using scanning electron microscopy to reveal the attachment system of their legs. The attachment devices are composed of claws and adhesive pads. The claws are connected with pretarsal segment, and their apical diverged hooks are developed to hold rough substrates. In contrast, the adhesive pads have an adhesive function onto smooth surface. The pads are interspersed at the ventral part of each tarsomere, and are composed of two kinds of hairy setae. The discoid tip seta (DtS) has a spoon-shaped endplate usually with a rounded concave structure, whereas the pointed tip seta (PtS) has a pointed tip, usually with a hooked endplate. While the PtS is broadly localized concentrically on the marginal area of both the proximal and distal pads, the DtS can be seen at the central areas of each adhesive pad except for the hind legs. Our findings demonstrate the presence of the direction-dependence pattern of the fibrillar system as well as a functional modification of the tenent setae to achieve proper contact with almost any kind of substrates.

• Bulletin of the Korean Chemical Society
• /
• 제25권12호
• /
• pp.1917-1923
• /
• 2004

Although the proteolytic activity of the Cu(II) complex of cyclen (Cyc) is greatly enhanced upon attachment to a cross-linked polystyrene (PS), the Cu(II)Cyc-containing PS derivatives reported previously hydrolyzed only a very limited number of proteins. The PS-based artificial metalloproteases can overcome thermal, mechanical, and chemical instabilities of natural proteases, but the narrow substrate selectivity of the artificial metalloproteases limits their industrial application. In the present study, artificial metalloproteases exhibiting broad substrate selectivity were synthesized by attaching Cu(II)Cyc to a PS derivative using linkers with various structures in an attempt to facilitate the interaction of various protein substrates with the PS surface. The new artificial metalloproteases hydrolyzed all of the four protein substrates (albumin, myoglobin, ${\gamma}$-globulin, and lysozyme) examined, manifesting $k_{cat}/K_m$ values of 28-1500 $h_{-1}M_{-1}$ at 50 $^{\circ}C$. The improvement in substrate selectivity is attributed to steric and/or polar interaction between the bound protein and the PS surface as well as the hydrophobicity of the microenvironment of the catalytic centers.

• BMB Reports
• /
• 제32권6호
• /
• pp.579-584
• /
• 1999

Mantis egg fibrolase (MEF-3) was purified from the egg cases of Tenodera sinensis using ammonium sulfate fractionation, gel filtration on Bio-Gel P-60, DEAE Affi-Gel blue gel affinity chromatogragphy, and MONO-Q anion-exchange chromatography. This protease had a molecular weight of 35,600 Da as determined by SDS-polyacrylamide gel electrophoresis under reducing conditions and its isoelectric point was 6.0. The N-terminal amino acids sequence was Ala-Thr-Gln-Asp-Asp-Ala-Pro-Pro-Gly-Leu-Ala-Arg-Arg. This sequence was 80% homologous to the serine protease from Tritirachium album. MEF-3 readily digested the ${\alpha}$-and ${\beta}$-chains of fibrinogen and more slowly the ${\gamma}$-chains. It showed strong proteolytic and fibrinolytic activities. Phenylmethanesulfonyl fluoride and chymostatin inhibited its proteolytic activity, while EDTA, EGTA, cysteine, ${\beta}$-mercaptoethanol, elastinal, tosyl-lysine chloromethylketone, and tosyl-amido-2-phenylethyl chloromethyl ketone did not affect its proteolytic activity. Among the chromogenic protease substrates, the most sensitive one to the hydrolysis of MEF-3 was benzoyl-Phe-Val-Arg-p-nitroanilide. Based on these experimental results, we speculated that MEF-3 is a serine protease with a strong fibrin(ogen)olytic activity.

• Journal of Microbiology and Biotechnology
• /
• 제1권1호
• /
• pp.54-62
• /
• 1991

Cyclodextrin glucanotransferase(CGTase) derived from Bacillus macerans was immobilized by (1) covalent linkage on chitosan and chitin with glutaraldehyde, (2) adsorption on DEAE-cellulose and Amberite IRA 900 after succinylation, and (3) entrapment on alginate and polyacrylamide by cross linking. Adsorption on Amberite IRA 900 and covalent linking on chitosan were identified to be the most suitable immobilization methods considering the yield of activity and stability of immobilized CGTase. The enzymatic properties of immobilized CGTase were investigated and compared with those of the soluble CGTase. Thermal stability of CGTase immobilized on chitosan was increased from 50 to $55^{\circ}C$, and the optimum temperature of CGTase immobilized on Amberite IRA 900 was shifted from 55 to $50^{\circ}C$. The effect of molecular size of soluble starch (substrate) on immobilized CGTase investigated using partially liquefied substrates with different dextrose equivalent(DE). Cyclodextrin(CD) conversion yield augmented according to the increase of DE level for immobilized CGTase on Amberite IRA 900. CD conversion yield of partially cyclized starch with soluble CGTase was higher compared with liquefied one with ${\alpha}-amylase$.