• 제목/요약/키워드: natural sand

검색결과 674건 처리시간 0.024초

모래와 굴패각을 이용한 인공습지 오수처리장치 개발 (Development of Constructed Wetland using Sand and Oyster shell for Sewage Treatment)

  • 박현건;이춘식;이홍재;서동철;허종수
    • 한국물환경학회지
    • /
    • 제20권5호
    • /
    • pp.437-446
    • /
    • 2004
  • To develop sewage treatment apparatus by natural purification method, the sewage treatment plant that consisted of aerobic and anaerobic plot was constructed. And then, the effects of treatment conditions on the removal of pollutants in the relation to sewage loading, sewage injection method and season according to the pebble kind. Removal rate of BOD and COD according to the sewage loading in effluent were over 95 and 77%, respectively. Removal rate of nitrogen in treated water by aerobic plot and effluent using sand were about 22~40 and 49~75%, respectively. Those of effluent using sand 75%+ oyster shell 25% and sand 50%+ oyster shell 50% as filter media in comparison with using sand were about 7~25 and 16~23%, respectively. Removal rate of phosphorus in treated water by aerobic plot and effluent using sand as filter media were about 30~36 and 52~56%, respectively. Those of effluent using sand 75%+ oyster shell 25% and sand 50%+ oyster shell 50% in comparison with using sand as filter media were about 11~40 and 12~45%, respectively. Removal efficiency of BOD and COD according to the intermittent injection method of sewage were slightly decreased, but those of nitrogen and phosphorus were little varied in comparison with continuous injection method. Removal efficiency of BOD and COD in winter in comparison with the others were little varied, but those of nitrogen and phosphorus slightly decreased.

패류 가공에 관한 연구 1. 개량조개 Mactra Sulcataria REEVE의 토사 배출에 대하여 (STUDIES ON THE SHELLFISH PROCESSING 1. Purification of the Surf Clam Mactra sulcataria REEVE for the Remove of Sand)

  • 이응호;변재형;허종화
    • 한국수산과학회지
    • /
    • 제3권1호
    • /
    • pp.27-32
    • /
    • 1970
  • 살아 있는 개량조개 속에 들어 있는 토사의 배출에 대하여 실험한 결과를 요약하면 다음과 같다. 1) 토사는 주로 입수관 및 출수관 주변, 아가미 주변, mantle주변 그리고 중장선을 위시한 소화 기관 속에 존재하였다. 그리고 소화기관 속에 들어 있는 모래의 크기는 $180\times10\mu\~550\times200\mu$정도의 극히 작은 것들이었다. 2) 시료를 밑바닥에 깔아 놓은 것과 중간층에 수하시킨 것 그리고 단층으로 깔든지 또는 수하시킨 것과 두껍게 깔든지 또는 수하시킨 것 사이에 토사의 배출에 있어 뚜렷한 차이는 찾아 볼 수 없었다. 3) 개량조개는 처음 1시간 정화시키면 약 $50\%$의 토사를 배출하며, $22\~26$ 시간만에 배출물의 양이 거의 일정한 값에 도달하지만, 배출물 속에 토사가 배출되지 않을 때까지는 약 42시간 소요되었다. 4) 토사의 배출에 미치는 PH의 영향을 보면 개량조개가 살고 있는 환경 해수보다 약 1정도 높은 쪽(pH 8.75)이 빨랐다. 5) 토사의 배출에 미치는 온도의 영향은 개량조개가 살고 있는 환경 해수의 온도 때가 온도를 더 높였을 때보다 토사의 배출이 빨랐다. 6) 토사의 배출에 미치는 염분 농도의 영향은 개량조개가 살고 있는 환경 해수의 염분 농도($30.61\%_{\circ}$)보다 약 배로 묽은 쪽($15.14\%_{\circ}$)이 배출이 빨랐다.

  • PDF

국내 부순모래의 물리적 성질과 입자 특성에 관한 연구 (A Study on Physical and Particle Properties of Crushed Sand in Korea)

  • 윤기원;김기훈;고경택;이장화;한천구
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
    • /
    • pp.352-355
    • /
    • 2004
  • Crushed sand is made by crushing the rocks artificially. With a wide shortage of natural river sand all over the region in Korea, demand for crushed sand are becoming increased. However, Informations as to crushed sand are insufficient. In this paper, the actual conditions of crushed sand related to producing and quality variation are investigated. 29 manufacturing company of crushed sand are reviewed. According to results, density of most crushed sand tested exceeded 2.5g/cm3, and absorption ratio meet the requirement of KS except one sample. For grain properties, passing amount of 0.08mm sieve satisfied the requirement of KS except one sample. Grain distribution of most crushed sand is estimated $54.26\%$. But 6 crushed sand sample did not meet the requirement of KS. Fineness modulus and grading are varied from manufacturing region. 18 samples of crushed sand among 29 samples deviated the minimum level of standard grading range by KS. Therefore, improvement of grain properties of crushed sand is urgently needed to manufacture better crushed sand.

  • PDF

Wind-sand tunnel experiment on the windblown sand transport and sedimentation over a two-dimensional sinusoidal hill

  • Lorenzo Raffaele;Gertjan Glabeke;Jeroen van Beeck
    • Wind and Structures
    • /
    • 제36권2호
    • /
    • pp.75-90
    • /
    • 2023
  • Turbulent wind flow over hilly terrains has been extensively investigated in the scientific literature and main findings have been included in technical standards. In particular, turbulent wind flow over nominally two-dimensional hills is often adopted as a benchmark to investigate wind turbine siting, estimate wind loading, and dispersion of particles transported by the wind, such as atmospheric pollutants, wind-driven rain, windblown snow. Windblown sand transport affects human-built structures and natural ecosystems in sandy desert and coastal regions, such as transport infrastructures and coastal sand dunes. Windblown sand transport taking place around any kind of obstacle is rarely in equilibrium conditions. As a result, the modelling of windblown sand transport over complex orographies is fundamental, even if seldomly investigated. In this study, the authors present a wind-sand tunnel test campaign carried out on a nominally two-dimensional sinusoidal hill. A first test is carried out on a flat sand fetch without any obstacle to assess sand transport in open field conditions. Then, a second test is carried out on the hill model to assess the sand flux overcoming the hill and the morphodynamic evolution of the sand sedimenting over its upwind slope. Finally, obtained results are condensed into a dimensionless parameter describing its sedimentation capability and compared with values resulting from other nominally two-dimensional obstacles from the literature.

해사를 사용한 수중불분리콘크리트의 특성에 관한 실험적 연구 (An Experimental Study on the Characteristics of Antiwashout Underwater Concrete Using Sea Sand)

  • 김명식;백동일;어영선
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1997년도 가을 학술발표회 논문집
    • /
    • pp.76-82
    • /
    • 1997
  • Recently as the development of a large-scale ocean structure or ocean is in progress, the importance of underwater concrete construction came to the fore. However, a problem with this underwater concrete construction is the segregation of cement and aggregate occurs when concrete is poured into the underwater. However, recently as an adhesiveness of the constituents of fresh concrete is increased even in our country, antiwashout concrete admixture were developed. The antiwashout concrete admixture can reduce the segregation significantly. Although this antiwashout underwater concrete is superior to the traditional underwater concrete in terms of durability, watertightness, stability, etc. But it is still unsatisfied due to the lack of criterion or construction experiences. Furthermore, because of an insufficiency of natural aggregate, the development of replacing aggregate came to be necessary. Accordingly, the purpose of this study is to investigate the feasibility of sea sand as a replacing aggregate and the characteristic change of antiwashout underwater concrete using river sand, sea sand, and blended sand (river sand:sea sand=3:7) through experimental researches.

  • PDF

순환잔골재 치환율 변화에 따른 3성분계 무기결합재 모르타르의 유동 및 강도특성 (Flowing and Strength Properties of Ternary System Inorganic Composite Mortar according to the Change of Replacement Ratio of Recycled Sand)

  • 배상우;박종필;김규용;이상수;송하영
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2012년도 춘계 학술논문 발표대회
    • /
    • pp.99-100
    • /
    • 2012
  • This study tried to present the appropriate replacement ratio of the recycled sand through the properties of the ternary system inorganic composite mortar according to replacement ratio change of the recycled sand about the natural sand through test verification. The flowing and compressive strength was degraded as the replacement ratio of the experimental result recycled sand increased. The appropriate replacement ratio of the recycled sand according to it was shown up less than 15%.

  • PDF

Low concentration cadmium removal using weathered sand of basalt

  • Park, Jae Hong;Lee, Jae Kwan;Shin, Dong Seok
    • Membrane and Water Treatment
    • /
    • 제12권2호
    • /
    • pp.51-58
    • /
    • 2021
  • The natural weathered sand of basalt (WSB) has been used for the removal of cadmium from aqueous solution. The influence of various parameters i.e., contact time, pH, weathered sand of basalt dosage, particle size of the weathered sand of basalt, temperature and initial cadmium concentration were analyzed. Cadmium adsorption kinetics was well described by the pseudo second order model. Adsorption equilibrium for cadmium was properly well fitted to Langmuir isotherm model with maximum adsorption capacity 0.50 mg/g. Compared with the other experimental results using various kinds of adsorbents at a low concentration (1.0 mg/L or so) similar to that of this study, the cadmium removal efficiency using weathered sand of basalt was higher. It has been demonstrated that weathered sand of basalt has a available alternative adsorbent for cadmium when its initial concentration is low.

Improvement of the geotechnical engineering properties of dune sand using a plant-based biopolymer named serish

  • Shabani, Khosro;Bahmani, Maysam;Fatehi, Hadi;Chang, Ilhan
    • Geomechanics and Engineering
    • /
    • 제29권5호
    • /
    • pp.535-548
    • /
    • 2022
  • Recently, the construction industry has focused on eco-friendly materials instead of traditional materials due to their harmful effects on the environment. To this end, biopolymers are among proper choices to improve the geotechnical behavior of problematic soils. In the current study, serish biopolymer is introduced as a new binder for the purpose of sand improvement. Serish is a natural polysaccharide extracted from the roots of Eremurus plant, which mainly contains inulins. The effect of serish biopolymer on sand treatment has been investigated through performing unconfined compressive strength (UCS), California bearing ratio (CBR), as well as wind erosion tests. The results demonstrated that serish increased the compressive strength of dune sand in both terms of UCS and CBR. Also, wind erosion resistance of the sand was considerably improved as a result of treatment with serish biopolymer. A microstructural study was also conducted via SEM images; it can be seen that serish coated the sand particles and formed a strong network.

자연하천에서 하도의 물리적 특성과 하상재료의 상관관계분석 (Analysis of Correlation on Physical Characteristics and Bed Materials in Natural Rivers)

  • 김기흥
    • 한국환경복원기술학회지
    • /
    • 제13권2호
    • /
    • pp.95-104
    • /
    • 2010
  • The purpose of this study is to analyze the correlation between physical stream characteristics and bed materials in natural rivers. Accordingly, four natural rivers were selected reference streams, they were Nam river, Sumjin River, Naesung River and Han River. Grain size distributions of bed materials were gravels, cobbles and boulders in Han river and Nam river, were sand, gravels, cobbles and boulders in Sumjin river and were sand in Naesung river. Four reference streams were divided into each two reference reaches (straight and bend) by plan and profile characteristics of naturally meandering stream. Therefore various reference reaches were chosen in the aspect of physical stream characteristics and grain size distributions. The results investigated and analyzed are as follows. The streams that grain sizes distributions of river bed materials were coarse were stable because they had variety of bed slope without sediment deposition, and then the riffles frequency and the physical characteristics were various. Also, velocitydepth regime were various in four kinds, and the response parts for water level change were small, so that channel flow status were stable and excellent condition. On the other hand, sand river that grain sizes distributions of river bed materials were fine had not the variety of parameters as velocity-depth regimes, sediment deposition, channel flow status and riffles frequency, so that the physical stream characteristics were not various.

고강도콘크리트에 사용된 이형철근의 부착거동 (A Study on the Bond Behavior of Used Deformed Bars in High-Strength Concrete)

  • 박경호;이두영
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
    • /
    • pp.647-652
    • /
    • 1999
  • The purpose of this study is to find the bond properties of deformed bars in hign-strength concrete by experimental and analytical method. In this study the following variables were adopted, i.e. (1) the compressive strength of concrete : 270, 400 and 600kg/$\textrm{cm}^2$ (2) the corrosion the bars : corroded and normal bars (3) the mixing ratio of natural and smashed fine aggregate : 7 : 3 and 5 : 5 (natural sand : smashed sand) For analytical method, the finite element analysis is performed. And the Pull-out test is performed as the experimental method.

  • PDF