• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2008년도 추계학술발표논문집
• /
• pp.335-338
• /
• 2008

2단발포에서 금형시간이 천연고무(NR) 스폰지의 팽윤에 미치는 효과를 검토하였다. Kneader와 Rollmill을 사용하여 NR컴파운드를 제조하고 높은 압력조건의 1차금형에서 부분가교시킨 후 대기압의 2차 금형에서 발포와 가교를 완성시켰다. NR스폰지의 겉보기밀도를 측정하고 주사전자현미경을 사용하여 셀구조를 관찰하였다. 얻어진 스폰지에 대하여 실온에서 톨루엔, 이소옥탄, 항공유에 의한 팽윤거동을 조사하였다. 1차금형시간이 증가하면 NR스폰지의 겉보기밀도가 증가하고 팽윤비가 감소하였다. 2차금형시간이 증가하면 NR스폰지의 겉보기밀도가 감소하고 팽윤비가 증가하였다. 용매의 접촉에 의한 NR 스폰지의 부피팽윤비를 높이기 위하여 금형에서 동시에 발생하는 발포제의 분해반응과 NR의 가교반응을 적절히 조절하는 것이 중요하다.

• Elastomers and Composites
• /
• 제5권1호
• /
• pp.69-74
• /
• 1970

The influence of various calcium carbonate on the physical properties of natural rubber have teen carries out extensive experiments on compounding. Final evaluation was made through various kinds of physical test-tensile strength, modulus, tear strength and hardnees-including particle size. The results are as follows: 1. Generally, tile tensile strength, modulus and tear strength showed the similar tendency in various calcium carbonate compounding. 2. The maximum volume of general using have been obtained with 150 phr calcium carbonate in $NR-CaCO_3$ compounding. 3. The particle size of domestic calcium carbonate showed $1.0\mu-2.6\mu$.

• Bulletin of the Korean Chemical Society
• /
• 제27권9호
• /
• pp.1473-1476
• /
• 2006

• Macromolecular Research
• /
• 제8권4호
• /
• pp.192-198
• /
• 2000

Cure characteristics and physical properties of carbon black-filled natural rubber (NR) compounds depending on the mixing procedure were studied using the compounds with different pre-final mixing (FM-1) stages. Carbon master batch (MB) and first and second remitting (1RM and 2RM) stages were employed as the FM-1 stage. Bound rubber content of the FM compound decreased with increasing the mixing steps. This was due to the decrease of the molecular weight distribution of the polymer by the rubber chain scission during the mixing. The Mooney viscosity decreased with increasing the mixing steps. Cure characteristics of the compounds were found to be different with the mixing procedures. The cure times of the compound became slower by increasing the number of the mixing steps. This was explained by the length of rubber chain, the carbon black network, distribution of the curatives in the compound, and immobilization of the polymeric segments. Modulus and tensile strength of the vulcanizate did not show a specific trend with the mixing procedure. Fatigue life of the vulcanizate increased by increasing the mixing stages.

• 한국염색가공학회지
• /
• 제35권4호
• /
• pp.246-255
• /
• 2023

In this study, we investigated for natural rubber foam to replace petrochemical-based neoprene foam. Experiments were conducted on vulcanization system and 2-step foaming process of natural rubber. The vulcanization system were EV(Efficient Vulcanization Cure), Semi-EV(Semi-Efficient Vulcanization Cure) and CV(Conventional Vulcanization Cure). In the 2-step foaming process, first molding temperature was 140℃, times were 15, 20, 25, and 30minutes, and the second molding temperature was 160℃, the times 5, 10, 15, and 20minutes. The cure and viscosity characterization were evaluated by oscillating disc rheometer (ODR) and mooney viscosmeter. Various mechanical characteristics, including hardness, tensile strength, elongation at the point of rupture, and tear strength, were quantified. Subsequently, an assessment of alterations in these mechanical attributes was conducted post-immersion in a NaCl solution. In addition degree of volume change was measured after immersing the NR foam in NaCl solution and the low-temperature permanent compression set was evaluated at 4℃. And expansion ratio and shrinkage ratio of NR foam were evaluated for 28 days. As a result the EV vulcanization system showed the least change in physical properties before and after salt water immersion, and the lowest shrinkage ratio for 28 days. In addition it was confirmed that the 2-step foaming optimum condition differed depending on the appropriate vulcanization condition.

• Elastomers and Composites
• /
• 제55권3호
• /
• pp.167-175
• /
• 2020

Various studies have been conducted to improve silica dispersion of silica filled tire tread compounds; among them, silica wet masterbatch (WMB) technology is known to be suitable for manufacturing silica filled compounds that have high silica content and high dispersibility. Till now, the WMB study is focused on the natural rubber (NR) or emulsion styrene-butadiene rubber (ESBR) that does not have a silica-affinity functional group, and a study of NR or ESBR having a silica-affinity functional group is still not well known. Unlike the dry masterbatch technology, the WMB technology can solve the problems associated with the high Mooney viscosity when applied to silica-friendly rubber. However, a coagulant suitable for each functional group has not yet been determined. Therefore, in this study, different coagulant applied silica WMB was prepared by applying calcium chloride, sulfuric acid, acetic acid, and propionic acid by using a carboxyl group functionalized reversible addition fragmentation chain transfer ESBR. The evaluation of the WMB compounds revealed that the calcium chloride added WMB compound showed excellent silica dispersion, abrasion resistance, and rolling resistance.

• Elastomers and Composites
• /
• 제34권4호
• /
• pp.341-349
• /
• 1999

본 연구에서는 산화방지제의 종류에 따라 천연고무 가황물이 어떠한 내열성과 내크랙성을 가지는지를 평가해 보았다. 가교시스템에 의한 영향을 방지하기 위해 촉진제/황 비율을 0.25로 고정하여 실험을 실시하였다. 페닐렌디아민계 산화방지제는 가교에 참여하여 가교밀도를 증가시킴으로 가황물의 인장강도를 향상시키는 것으로 나타났고, 분산성의 차이에 의해 인열강도는 산화방지제에 따라 거의 2배의 차이가 있음을 보였다. 인열에너지는 인열강도와 유사한 경향을 보였는데 불규칙한 크랙경로를 나타낸 페닐렌디아민계 산화방지제가 첨가된 가황물이 가장 우수하였다. Pure shear test에서도 페닐렌디아민계 신화방지제가 첨가된 가황물이 낮은 크랙 성장 속도와 높은 탄성율에 따른 높은 변형에너지 완화율을 가진 것으로 나타났다. 고무배합물 속에서 뛰어난 분산성과 높은 가교밀도를 보인 페닐렌디아민계 산화방지제가 첨가된 가황물이 우수한 내열성과 내크랙성을 가짐을 알 수 있었다.

• Elastomers and Composites
• /
• 제33권5호
• /
• pp.335-344
• /
• 1998

본 연구에서는 군용 전투차량 궤도 패드용으로 사용되는 고무 배합물의 내크랙성 향상을 위해 기계적 물성이 우수한 천연고무를 이용하여 크랙 개시 저항성 즉, 인열 에너지와 크랙성장 저항성인 크랙 성장 속도를 평가하였다. 내크랙성에 영향을 주는 인자는 여러 가지가 있으나, 본 실험에서는 주로 충전제인 카본블랙과 가교 시스템을 평가하였다. 본 연구결과 촉진제의 함량이 황의 함량과 동일 할 때 내크랙성이 가장 우수하였다. 또한 카본블랙은 보강성이 우수한 hard black의 일종인 ISAF (N220)가 강도 및 가공성에서 가장 우수한 것으로 평가되었으며 적정 함량은 50phr이었다.

• Macromolecular Research
• /
• 제14권2호
• /
• pp.187-193
• /
• 2006

Organoclay, was applied as a filler, in place of carbon black and silica, to a natural rubber (NR)/butadiene rubber (BR) blend. A compounding method was used to disperse and separate the layered silicates. The effect of a coupling agent on the vulcanizates was evaluated using both the silica and organoclay filled compounds. After the compounding processes were completed, the XRD diffraction peaks disappeared, but then reappeared after vulcanization. The scorch times for the organoclay-filled compounds were very short compared to those for carbon black and silica-filled compounds. The organoclay-filled compounds showed high values of tensile strength, modulus, tear energy, and elongation at the break. When ranked by viscosity, the compounds appeared in the following order: silica > silica (Si-69) > organoclay > organoclay (Si-69) > carbon black. Fractional hysteresis, tensile set, and wear rates were very consistent with the viscosity of the vulcanizates. The Si 69 coupling agent increased reversion resistance, the maximum torque values in the ODR, modulus, and wear resistance, but decreased elongation at the break, fractional hysteresis, and tension set of the vulcanizates.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.875-879
• /
• 2006

Noise reduction has become a major issue of the duct air-conditioners. This paper describes the reduction of noise and vibration of rotational slim duct system. The design of slim duct system is the most important point of noise reduction in terms of the motor of 2f line noise, resonance noise between forced frequency and natural frequency of Sirocco fan, unbalance noise of motor axis and the noise induced refrigerant. The noise of duct system is mainly measured from diffuser and bottom of duct. The optimal design was implemented after measuring the effect of noise and vibration in each part which is composed of duct system. In this paper, experimental results show that the main elements in air-conditioner duct design. These elements are anti-vibration rubber of motor, axis length of motor, rubber coupler, materials of sirocco fan and control method of motor which are the most vital factors in reducing noise.