• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.465-468
• /
• 1995

Matrix assisted laser desorption ionization in mass spectrometry is a fast and accurate method to determine the molecular weight of natural and synthetic polymers. Unknown peptides such as elastase inhibitor and $\small{D}$-hydantoinase were analyzed using sinapinic acid as matrix and their molecular weights were compared with the results from protein sequencer and gel filtration chomatography, respectively. Synthetic polymers such as polyethyleneglycol, polypropyleneglycol, polydimethylsiloxane, and polystyrene were analyzed using matrices such as 2,5-dihydroxybenzoic acid, 4-hdroxyazobenzenecarboxylic acid, and 2-nitrophenyl octyl ether. Average molecular weights of polystyrene were compared with molecular weights by gel permeation chromatography.

• Journal of Integrative Natural Science
• /
• v.3 no.2
• /
• pp.61-71
• /
• 2010

Hydrosilanes possessing reactive Si-H bond are used in synthesizing various types of polysilanes by dehydrocoupling under the influence of various organometallic promoters. Catalytic Si-Si/Si-O coupling of hydrosilanes with hydrosilanes, alcohols, and lactones to silicon-based polymers are described in this article as selective examples of our recent research developments. These silicon-containing polymers can be used as a precursor to prepare useful functional materials for fabricating electronic devices.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3477-3480
• /
• 2013

• Bulletin of the Korean Chemical Society
• /
• v.35 no.12
• /
• pp.3459-3464
• /
• 2014

Synthesis and structural characterization of mercury(II) halides and perchlorate complexes (1-4) of bis-$OS_2$-macrocycle (L) are reported. L reacts with mercury(II) chloride and bromide to yield an isostructural 2D coordination polymers with type $[Hg(L)X_2]_n$ (1: X = Cl and 2: X = Br). In 1, each Hg atom which lies outside the cavity is six-coordinate with a distorted octahedral geometry, being bound to four adjacent ligands via monodentate Hg-S bonds and two remaining sites are occupied by two terminal chlorido ligands to form a fishnet-like 2D structure. When reacting with mercury(II) iodide, L afforded a 1D coordination polymer $\{[Hg_2(L)I_4]{\cdot}CHCl_3\}_n$ (3) in which each exocyclic Hg atom is four-coordinate, being bound to two sulfur donors from different ligands doubly bridging the ligand molecules in a head-to-tail mode. The coordination sphere in 3 is completed by two iodo terminal ligands, adopting a distorted tetrahedral geometry. On reacting with mercury(II) perchlorate, L forms solvent-coordinated 1D coordination polymer $\{[Hg_2(L)(DMF)_6](ClO_4)_4{\cdot}2DMF\}_n$ (4) instead of the anion-coordination. In 4, the Hg atom is five-coordinate, being bound to two sulfur donors from two different ligands doubly bridging the ligand molecules in a side-by-side mode to form a ribbon-like 1D structure. The three remaining coordination sites in 4 are completed by three DMF molecules in a monodentate manner. Consequently, the different structures and connectivity patterns for the observed exocyclic coordination polymers depending on the anions used are influenced not only by the coordination ability of the anions but also by anion sizes.

• Journal of Integrative Natural Science
• /
• v.4 no.3
• /
• pp.177-181
• /
• 2011

The catalytic dehydrocoupling of bis(1-sila-3-butyl)benzene 1 and 2-phenyl-1,3-disilapropane 2 by $Cp_2ZrCl_2$/Red-Al and $Cp_2ZrCl_2$/n-BuLi was reported to compare their catalytic efficiency. The dehydrocoupling of monomeric silanes 1 with the $Cp_2ZrCl_2$/Red-Al and $Cp_2ZrCl_2$/n-BuLi combination catalysts produced two phases of polymers: one is a highly cross-linked insoluble solid, and the other is noncross-linked or slightly cross-linked soluble oil and could be a precursor for the solid polymer. The dehydrocoupling of 2 with the $Cp_2ZrCl_2$/n-BuLi combination catalyst similarly produced two phases of polymers. By contrast, the catalytic reaction of 2 with the $Cp_2ZrCl_2$/Red-Al combination catalyst produced a soluble polymer via redistribution/dehydrocoupling process.

• Elastomers and Composites
• /
• v.18 no.2
• /
• pp.51-59
• /
• 1983

The dielectric properties of polymers are very important when investigating the molecular structure of polymers. The characteristics of the dielectric absorption in vulcanized natural rubber were studied in frequency ranging from 10[KHz] to 32[MHz] at the temperature of 25[$^{\circ}C$]. As a result of the study, it has been confirmed that natural rubber vulcanized below 4phr leads to two kinds of dielectric losses due to the interfacial polarization and the dipole polarization by sulfur, and of above 7[%] was only a loss due to the dipole polarization by sulfur. Futhermore, the dielectric loss maximum $tan{\delta}$ spectrum, removed to the low frequency in accordance with increasing sulfur, depends greatly on sulfur. The volume resistivity of $10^{7}{\sim}10^{11}[{\Omega}{\cdot}cm}]$, regardless of whether the crosslinking of rubber is weakened by sulfur, was observed.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.1
• /
• pp.19-32
• /
• 2012

Pharmaceutical use accounts for a great part of articles and papers on crosslinking of polymers. Crosslinking of polymers used for tissue engineering and drug delivery respects non-cytotoxicity and in situ gelling. The crosslinking of polymers is aimed not only at the improvement of modulus, chemical resistance, and thermal resistance, but also at endowing them with such functions as metal adsorption, antifouling, and ion exchange via crosslinked segments. Smart polymers responding to environmental change, and cosslinking mediated by light, enzyme, natural compound and in aqueous medium in consideration of environment are being studied. Developing new polymeric materials is essential along with the pharmaceutics aiming at the longevity of 120 years old. Functionalization and property adjustment of polymers through crosslinking will be done more delicately. Hydrogels will be focused on injectable and in situ gel forming. In the coating industry crosslinking system with low non-toxicity and low energy consumption will be developed in consideration of workers and environment.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.495-499
• /
• 2000

The relative affinity of seaweed alginate, polyguluronate and polymannuronate for cations was investigated. The cations used in this study were $Ca^{2+}$, $Cd^{2+}$, $Co^{2+}$, $Cu^{2+}$, $Fe^{3+}$, $Hg^{2+}$, $Mg^{2+}$, $Mn^{2+}$, $Pb^{2+}$, $Rb^{1+}$, $Sr^{2+}$ and $Zn^{2+}$. The ability of cations to precipitated polymers was determined as the relative affinity of seaweed alginate, polyguluronate and polymannuronate for cations. The relative affinity of polymers for cations in order are as follow: Seaweed alginate: $Fe^{3+}$,$Cu^{2+}$,$Cd^{2+}>Pb^{2+}>Co^{2+}$,$Zn^{2+}>Ca^{2+}>Sr^{2+}$,$Rb^{1+}>Mn^{2+}>Mg^{2+}$,$Hg^{2+}$ Ployguluronate:$Fe^{3+}$,$Cu^{2+}$,$Cd^{2+}>Ca^{2+}$,$Co^{2+}$,$Pb^{2+}>Sr^{2+}$,$Rb^{1+}$,$Zn^{2+}>Hg^{2+}$,$Mn^{2+}>Mg^{2+}$ Polymannuronate:$Fe^{3+}$,$Cd^{2+}$,$Cu^{2+}>Ca^{2+}$,$Pb^{2+}>Zn^{2+}$,$Rb^{1+}$$Sr^{2+}$,$Hg^{2+}>Co^{2+}>Mn^{2+}>Mg^{2+}$

• Journal of the Korean Chemical Society
• /
• v.36 no.6
• /
• pp.955-957
• /
• 1992

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05a
• /
• pp.187-190
• /
• 2004

Microemulsions gelled by the aid of natural polymers, i.e. microemulsion-based organogels (MBGs), have become of interest as novel tools for enzyme immobilization in hydrophobic solvents [1,2]. Sodium bis(2-ethylhexyl) sulfosuccinate (AOT)is frequently employed as an amphiphile for stable MBG formation.(omitted)