• 폴리머
• /
• 제31권1호
• /
• pp.20-24
• /
• 2007

제조과정에서 단백질 약물의 생물학적 활성의 보존은 약물의 성공적인 전달에 있어 여전히 중요한 과제이다. 이중에멀션 유기용매 증발법을 사용하여 나노입자를 제조하였고, 입자의 형태, 크기, 함입률 그리고 방출속도와 방출되는 효소의 활성을 살펴보았다. 입자의 크기는 고분자인 락타이드 글리콜라이드 공중합체의 농도가 증가할수록 커졌으며, 유화제의 농도에는 큰 차이가 없었으나, 4% PVA의 사용에서 가장 좁은 입자분포를 얻을 수 있었다. 최적의 조건에서 72.6%의 단백질 함입률과 $198.3{\pm}13.8 nm$ 크기의 나노입자를 얻었다. 입자로부터 효소의 방출은 첫 방출시기에 매우 빠르게 일어났으며 12일 내에 83%가 방출되었다. 이에 따른 방출되는 효소의 활성은 6일째까지 증가되었다.

• 접착 및 계면
• /
• 제18권3호
• /
• pp.118-126
• /
• 2017

천연섬유강화 복합재료에서 여러 가지 섬유표면 개질을 통해서 천연섬유와 고분자매트릭스 사이에 계면접착과 복합재료 특성을 향상시키고자 하는 많은 연구 노력이 있었다. 본 연구에서는 폐양모섬유 강화 폴리프로필렌 매트릭스 복합재료를 압축성형공정 방법으로 제조하였고, 그들의 기계적 특성 및 충격 특성을 분석하였다. 그 결과, 폐양모/폴리프로필렌 복합재료의 인장 및 굴곡 특성 그리고 충격강도는 수산화나트륨(NaOH)을 이용한 알칼리처리와 3-glycidylpropylsilane(GPS)을 이용한 실란처리와 같은 처리매체에 크게 의존하였다. 실란처리를 한 폐양모섬유를 포함한 복합재료는 알칼리처리를 한 폐양모섬유를 포함한 것보다 더 우수한 기계적 특성과 충격저항성을 나타내었다. 복합재료 파단면은 특성 증가가 폐양모섬유와 폴리프로필렌 매트릭스 사이에 계면결합의 향상에 의한 것임을 정성적으로 뒷받침해주었다.

• Bulletin of the Korean Chemical Society
• /
• 제35권12호
• /
• pp.3459-3464
• /
• 2014

Synthesis and structural characterization of mercury(II) halides and perchlorate complexes (1-4) of bis-$OS_2$-macrocycle (L) are reported. L reacts with mercury(II) chloride and bromide to yield an isostructural 2D coordination polymers with type $[Hg(L)X_2]_n$ (1: X = Cl and 2: X = Br). In 1, each Hg atom which lies outside the cavity is six-coordinate with a distorted octahedral geometry, being bound to four adjacent ligands via monodentate Hg-S bonds and two remaining sites are occupied by two terminal chlorido ligands to form a fishnet-like 2D structure. When reacting with mercury(II) iodide, L afforded a 1D coordination polymer $\{[Hg_2(L)I_4]{\cdot}CHCl_3\}_n$ (3) in which each exocyclic Hg atom is four-coordinate, being bound to two sulfur donors from different ligands doubly bridging the ligand molecules in a head-to-tail mode. The coordination sphere in 3 is completed by two iodo terminal ligands, adopting a distorted tetrahedral geometry. On reacting with mercury(II) perchlorate, L forms solvent-coordinated 1D coordination polymer $\{[Hg_2(L)(DMF)_6](ClO_4)_4{\cdot}2DMF\}_n$ (4) instead of the anion-coordination. In 4, the Hg atom is five-coordinate, being bound to two sulfur donors from two different ligands doubly bridging the ligand molecules in a side-by-side mode to form a ribbon-like 1D structure. The three remaining coordination sites in 4 are completed by three DMF molecules in a monodentate manner. Consequently, the different structures and connectivity patterns for the observed exocyclic coordination polymers depending on the anions used are influenced not only by the coordination ability of the anions but also by anion sizes.

• Elastomers and Composites
• /
• 제47권1호
• /
• pp.23-29
• /
• 2012

실리카가 충전된 천연고무 복합소재 내에서 실란 함량의 증가가 실리카간의 구조 발달 상수 (${\alpha}_F$)에 미치는 영향을 비교하였다. 동일한 실리카양 (10, 20, 30, 40 phr)에서 실란의 함량 (2, 4, 6, 8, 10, 12%)이 증가할수록 ${\alpha}_F$값이 증가하는 경향이 나타났다. 이는 실란내 존재하는 황이 가교에 참여하였기 때문인 것으로 판단된다. 또한 실란 함량이 같은 조건에서 실리카양이 증가할수록 ${\alpha}_F$값이 증가하였는데 이는 실리카 간 상호관계가 증가하였기 때문인 것으로 판단된다.

• Elastomers and Composites
• /
• 제47권1호
• /
• pp.18-22
• /
• 2012

실란처리된 실리카가 천연고무 복합소재 내에서 실리카 간의 구조 발달 상수 ${\alpha}_F$에 미치는 영향을 비교하였다. 기존의 질량분율로 표시하던 Wolff의 방법을 본 실험에서는 부피분율을 사용하여 Wolff의 값과 비교하였다. 두 표현방식 모두 실리카의 함량이 증가할수록 ${\alpha}_F$값이 증가하는 경향을 보였다. 또한 부피분율로 표현하였을 시 ${\alpha}_F$값 간의 차이가 더욱 커지는 것을 관찰하였다. 따라서 부피분율로 표현하는 것이 ${\alpha}_F$값의 차이를 관찰하는데 있어서 기존에 질량분율을 사용하는 Wolff의 방법 보다는 차이를 뚜렷하게 나타낼 수 있다는 것을 관찰하였다. 또한 촉진제의 양을 변화시켜 관찰한 ${\alpha}_F$값의 변화와 비교하였다.

• Bulletin of the Korean Chemical Society
• /
• 제29권2호
• /
• pp.499-502
• /
• 2008

• 한국응용과학기술학회지
• /
• 제26권3호
• /
• pp.263-268
• /
• 2009

Superporous Hydrogels (SPHs) have been extensively investigated for various biomedical applications due to their fast swelling and superabsorbent properties. In this study, glycol chitosan that is one of most abundant natural polymers was used as a cross-linking agent instead of bisacrylamide (BIS), which is a broadly used crosslinking agent for preparation of SPHs. Glycol chitosan was modified to have reactive vinyl groups by chemical conjugation with glycidyl methacrylate (GMA). The vinyl group-containing glycol chitosan (GC-GMA) was characterized by FT-IR and $^1H$-NMR measurements. SPHs have been prepared in various synthetic conditions to establish the optimum synthetic process for making superporous structure, where the inner pores are interconnected to each other to form a open channel structure. Various SPHs with different GC-GMA contents have been successfully prepared and have been observed to show faster swelling properties than other conventional SPHs. From the study on the swelling behavior of SPHs, the GC-GMA content is considered to be an important factor for controlling their swelling properties.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Proceedings of Pre-symposium of the 10th ISWPC
• /
• pp.34-42
• /
• 1999

The present investigation has focused up on the study of the adsorption of three different molecular mass fractions of a polyDiMethylDiAllylAmmoniumChloride (DMDAAC) (8750(LM\ulcorner), 48000(MM\ulcorner) and 1200000(HM\ulcorner)) on bleached chemical fibres. Both kinetics of adsorption and equilibrium adsorption measurements have been conducted and each adsorption has been measured by polyelectrolyte titration. The results show that the LM\ulcorner polymer can reach all of the charges in the fibre wall whereas the MM\ulcorner and HM\ulcorner can only reach the external surfaces of the fibres. It is also shown that the kinetics of adsorption of the LMw polymer is not at all affected by the presence of a saturated layer of HMw polymer on the surface of the fibres. Finally, the results from the investigation show that it is possible to have full coverage of the external surface of the fibres by a high molecular mass polymer and a full coverage of the internal surface of the fibres with a low molecular mass polymer. This is true if the high molecular masspolymer is added first followed by addition of the low molecular masspolymer.

• International Journal of Advanced Culture Technology
• /
• 제7권3호
• /
• pp.10-24
• /
• 2019

This study aimed to investigate the effects and epidermis penetration system with polymer micelle of Red Pinus densiflora extract. In the antioxidant test, the total concentration of polyphenol compounds was determined to be $137.5163{\pm}7.70mg/g$ in ethanol extract, $133.956{\pm}1.57mg/g$ in hydrothermal extract. The DPPH radical scavenging effects were $95.29{\pm}0.15%$ in ethanol extract at 1,000 mg/L. Elastase inhibition rates were $100.00{\pm}2.85%$ in ethanol extract at 2,000 mg/L. The antimicrobial effect of the ethanol extraction was higher than that of hydrothermal extractions. In the epidermal permeability experiment, it was confirmed that the permeation of the polymer micelle containing the Red Pinus densiflora's ethanol extract and cell penetrating peptides was remarkable. Here, we confirmed that ethanol extract of Red Pinus densiflora displayed excellent the effects in antioxidant test and epidermis penetration system with polymer micelle. As a result, Red Pinus densiflora extract has potential to be used as a safe and natural cosmetic material in the future.

• 한국수소및신에너지학회논문집
• /
• 제33권2호
• /
• pp.176-182
• /
• 2022

Since the various characteristics of the polymer electrolyte membrane are not clearly identified, it is difficult to predict and design applications for various conditions. In this study, as a previous study on the aging of the polymer electrolyte membrane, a study was conducted on the change of mechanical properties according to the aging of the polymer electrolyte membrane. Through the tensile test of Nafion 117, the mechanical properties change due to aging was confirmed. As a result of the tensile test, it was confirmed that the aged Nafion 117 had reduced tensile strength. Through DSC measurement, aged Nafion confirmed that the glass transition temperature and enthalpy change were low, which is thought to be the effect of molecular motion and transition due to the lapse of time. The effect is thought to cause a difference in the amount of change in enthalpy, resulting in a difference in mechanical properties during tension.