• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.223-224
• /
• 2002

The mechanisms of formation of transfer film under the condition of wear of Steel AISI1020 by natural rubber were investigated. The transfer film was observed and the formation mechanisms were clarified. The formation process of transfer film on the worn surface of the steel could be divided into two stages. Firstly, the adhesive layer emerged on the worn surface of the steel by adhesion of natural rubber. in which the macromolecular chains of natural rubber joined to the surface of the steel by Van der Waals' force. And then, the iron atom and metal oxide reacted with the macromolecular of natural rubber in the adhesive layer and produced Fe-polymer compound. As a result, the transfer film was formed on the worn surface of the steel. The transfer film was joined to the worn surface of the steel by the chemical bonds and electrostatic force.

• Korean Journal of Environmental Biology
• /
• v.28 no.3
• /
• pp.150-157
• /
• 2010

Biodegradation behavior of poly(butylene succinate-co-butylene adipate) (PBSA) was examined when PBSA was buried in the natural soil and the soil inoculated with Burkholderia cepacia after sterilization. After 80 days of the soil burial test at room temperature, the PBSA film buried in the natural soil lost 34.0% of its intial weight, while the same film lost 59.2% of its initial weight when buried in the sterile soil inoculated with B. cepacia. The optical and SEM observations of the surface morphology of the PBSA film also indicated that the surface erosion and rupture took place faster when the film was buried in the sterile soil inoculated with B. cepacia compared to the film buried in the natural soil. Viable cell number in the natural soil and that the sterile soil inoculated with B. cepacia increased by a factor of 6~7 and 10~14, respectively as compared to the initial viable cell number.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.100-100
• /
• 2012

상품성이 떨어지는 B, C급의 Split leather에 감온 기능성 Film을 부착하고, Film 부착 공정에서 유성 접착제의 사용을 배제한 친환경적인 고급 Laminated split leather를 제조 하였다. 온도에 따라 색이 변하는 감온 Microcapsule 염료를 이용한 Film의 색도, Touch감과 신장 등의 최적조건을 찾는 실험으로서 수성 PU 접착제, Wetting&levelling agent, 증점제, 감온 microcapsule 염료를 상온에서 혼합하여 Film을 제조한 다음 수성 PU 접착제와 Urethane용 경화제를 혼합한 접착제를 이용하여 가죽에 부착시켰다. 감온 microcapsule자체의 색도가 떨어지므로 두 번 코팅하는 방법으로 이 문제점을 보완 하였으며, 감온 microcapsule 염료의 함량에 따른 물성 평가를 하였고, 감온 microcapsule 염료를 이용한 Film 공정을 확립 하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1419-1424
• /
• 2006

We could reduce the reflection from PET(polyethylene terephthalate) film surface by natural plasma etching which does not use etch masks. The plasma etched PET film showed lower reflectance and higher transmittance which is resulted by making subwavelength structure(SWS) on the film surface by the plasma etch rate difference between the amorphous and crystalline region in the surface of PET film.

• Biomedical Science Letters
• /
• v.28 no.1
• /
• pp.50-57
• /
• 2022

In this study, we tried to examine the possibility of developing a dental product such as tooth decay prevention and oral hygiene by manufacturing a natural polymer film for oral use. Natural polymer films were prepared from shark byproduct extract (SBE) and gellan gum (GG). As an antibacterial substance, the antibacterial activity of green tea extract against tooth decay-causing bacteria was measured. An film was prepared by adding green tea extract to the composition of SBE and GG. The mechanical, solubility, moisture content and antibacterial function of the prepared film were investigated in detail. Also, the incorporation of GTE into the SBE/GG film improved the physical performance of the film. Increasing the content of GTE improved the antioxidant and antibacterial properties of the film. Formulation of antimicrobial SBE/GG film containing green tea extract was established and these results evidently showed potential for cavity prevention products application.

• Journal of the Korean Chemical Society
• /
• v.54 no.4
• /
• pp.380-386
• /
• 2010

We have investigated the growth kinetics of Al oxide film by anodization in sulfuric acid solution and the electronic properties of this film using electrochemical impedance spectroscopy. Al oxide film consisted $Al_2O_3$ was grown based on the point defect model and shown the eclctronic properties of n-type semiconductor.

• Journal of the Korean Chemical Society
• /
• v.53 no.4
• /
• pp.466-470
• /
• 2009

• Bulletin of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.201-204
• /
• 2009

$BaTiO_3/SrTiO_3$ and $PbTiO_3/PbZrO_3$ superlattice thin films were fabricated on $Pt/Ti/SiO_2/Si$ substrate by the pulsed laser deposition process. The morphologies and physical properties of deposited films were characterized by using X-ray diffractometer, HR-SEM, and Impedance Analyzer. XRD data and SEM images of the films indicate that each layer was well deposited alternatively in the superlattice structure. The dielectric constant of $BaTiO_3/SrTiO_3$ superlattice thin film was higher than that of individual $BaTiO_3$ or $SrTiO_3$ film. Same result was obtained in the $PbTiO_3/PbZrO_3$system. The dielectric constant of a superlattice film was getting higher as the number of layer is increased.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.5
• /
• pp.1355-1360
• /
• 2013

We have developed a new multifunctional material, 4,4',4"-tris(4-naphthalen-2-yl-phenyl)amine (2-TNPA), which can be used as a blue-emitting and hole-transporting material in organic light-emitting diodes (OLEDs), as well as a donor material in organic solar cells (OSCs) and an active material in organic thin-film transistors (OTFTs). The OLED device doped with 3% 2-TNPA shows a maximum current efficiency of 3.0 $cdA^{-1}$ and an external quantum efficiency of 3.0%. 2-TNPA is a more efficient hole-transporting material than 4,4'-bis[N-(naphthyl-N-phenylamino)]biphenyl (NPD). Furthermore, 2-TNPA shows a power-conversion efficiency of 0.39% in OSC and a field-effect mobility of $3.2{\times}10^{-4}cm^2V^{-1}s^{-1}$ in OTFTs.

• Korean journal of applied entomology
• /
• v.50 no.2
• /
• pp.83-96
• /
• 2011

This study was conducted to investigate the influence of natural degrading polymer film covering in rice paddies on the benthic macroinvertebrate community structure in Dangsu-dong, Suwon, Gyeonggi-do from May 2009 to September 2009. We compared 5 treatments: golden apple snail farming (GF), natural degrading polymer film + organic farming (NOF), natural degrading polymer film + chemical farming (NCF), conventional farming (CF), and no fertilization (NF) as the control. The total number of species was highest in NOF followed by GF, NF, NCF, and CF. The total number of individuals was highest in NOF followed by NCF, CF, NF, and GF. The Dominance index (DI) ranged from 0.43 to 0.95. The highest dominance index was in GF followed by NCF, NF=CF, and NOF. The species diversity index (H') for each experimental plot ranged from 0.49 to 2.93. The average species diversity index was highest in NOF followed by NF, GF, CF, and NCF. After the natural degrading polymer film covered the paddies, the benthic macroinvertebrates tended to recover, but leeches and aquatic beetles increased. Mollusca and Annelida, which are sensitive taxa, decreased in both species and individual numbers after the soil was covered with the natural degrading polymer film. The number of species tended to recover. However, the number of individuals continued to decrease.d, especially individuals. Since then, the number of species tended to recover. However, the number of individuals decreased.