• 제목/요약/키워드: natural convective fluid flow

검색결과 23건 처리시간 0.022초

혼합대류에 의한 구 주위의 충류유동 및 열전달 해석 (Analysis of mixed convective laminar flow and heat transfer about a sphere)

  • 이준식;김택영
    • 대한기계학회논문집
    • /
    • 제11권2호
    • /
    • pp.345-353
    • /
    • 1987
  • 본 연구에서는 구 주위의 혼합대류에 대하여 전 영역에 걸쳐 유효한 매개변수 를 차원해석에 의해 유도하고 이를 적용하여 지배방정식을 비상사 경계층 방정식의 형 태로 변환하고 이를 유한차분법에 의해 수치적으로 해석하였다. 단순 강제대류에서 부터 단순 자연대류 까지의 전 영역에 걸쳐 구 주위의 속도 및 온도분포,국소열전달계 수 및 마찰계수를 Gr/Re$^{2}$의 함수로 구하였으며 Prandtl수가 0.7과 7인 유체에 대 하여 계산을 수행함으로써 Prandtl수의 변화에 따른 강제대류 및 자연대류의 비교강도 의 영향에 대하여 고찰하였다. 자연대류의 영향에 의한 벽면에서의 운동에너지증가 에 따른 유동의 박리점 이동에 대하여도 고찰하였다.

유한요소법을 이용한 자연대류열전달 수치해석 연구 (A Numerical Study for Natural Convective Heat Transfer by Finite Element Method)

  • 이진욱
    • 에너지공학
    • /
    • 제7권1호
    • /
    • pp.113-121
    • /
    • 1998
  • 자연대류열전달에 있어서 유체의 속도는 온도장에 의해 크게 영향을 받는다. 따라서 유체의 물성치의 변화는 유동장 및 온도장에 크게 영향을 미칠 수 있다. 본 연구에서는 물성치에 의한 영향을 분석하기 위하여 동일한 레이레이수(Rayleigh number)하에서 물성치의 대표적인 무차원수인 프란틀수(Prandtl number)가 넓은 범위에서 변하는 경우에 대한 연구를 수행하였다. 그리고 유체의 점성계수 및 열전도도를 온도에 따른 2차원 다항식 함수로 모델링하여 전산해석을 시도하여 그 영향을 분석하고자 시도하였다. 열전달량의 척도인 누셀트수(Nusselt number)의 프란틀수 의존도는 레이레이수 의존도에 비하면 약한 편이지만 비교적 강한 것으로 나타났다. 물성치가 온도의 함수로 주어지는 경우, 유동장은 경계면을 제외하고는 비교적 강한 것으로 나타났다. 물성치가 온도의 함수로 주어지는 경우, 유동장은 경계면을 제외하고는 비교적 약한 영향을 받지만 온도장은 강한 영향을 받는 것으로 나타났으며, 특히 열전도도가 온도의 함수로 주어지는 경우에 온도장에 미치는 영향은 상당히 강한 것으로 관찰되었다.

  • PDF

설비공학 분야의 최근 연구 동향: 2011년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research: A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2011)

  • 한화택;이대영;김서영;최종민;백용규;김수민
    • 설비공학논문집
    • /
    • 제24권6호
    • /
    • pp.521-537
    • /
    • 2012
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2011. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of fluid machinery and fluid flow, thermodynamic cycle, and new and renewable energy. Various topics were presented in the field of fluid machinery and fluid flow. Research issues mainly focused on the rankine cycle in the field of thermodynamic cycle. In the new and renewable energy area, researches were presented on geothermal energy, fuel cell, biogas, reformer, solar water heating system, and metane hydration. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, nanofluids and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer above liquid helium surface in a cryostat, methane hydrate formation, heat and mass transfer in a liquid desiccant dehumidifier, thermoelectric air-cooling system, heat transfer in multiple slot impinging jet, and heat transfer enhancement by protrusion-in-dimples. In the area of pool boiling and condensing heat transfer, researches on pool boiling of water in low-fin and turbo-B surfaces, pool boiling of R245a, convective boiling two-phase flow in trapezoidal microchannels, condensing of FC-72 on pin-finned surfaces, and natural circulation vertical evaporator were actively performed. In the area of nanofluids, thermal characteristics of heat pipes using water-based MWCNT nanofluids and the thermal conductivity and viscosity were measured. In the area of industrial heat exchangers, researches on fin-tube heat exchangers for waste gas heat recovery and Chevron type plate heat exchanger were implemented. (3) Refrigeration systems with alternative refrigerants such as $CO_2$, hydrocarbons, and mixed refrigerants were studied. Heating performance improvement of heat pump systems were tried applying supplementary components such as a refrigerant heater or a solar collector. The effects of frost growth were studied on the operation characteristic of refrigeration systems and the energy performance of various defrost methods were evaluated. The current situation of the domestic cold storage facilities was analyzed and the future demand was predicted. (4) In building mechanical system fields, a variety of studies were conducted to achieve effective consumption of heat and maximize efficiency of heat in buildings. Various researches were performed to maximize performance of mechanical devices and optimize the operation of HVAC systems. (5) In the fields of architectural environment and energy, diverse purposes of studies were conducted such as indoor environment, building energy, and renewable energy. In particular, renewable energy and building energy-related researches have mainly been studied as reflecting the global interests. In addition, various researches have been performed for reducing cooling load in a building using spot exhaust air, natural ventilation and energy efficiency systems.