• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.92-95
• /
• 2004

Interfacial shear strength (IFSS) of environmentally- friend natural fiber reinforced polymer composites playa very important role in controlling the overall mechanical properties. In this work the IFSS of Ramie and Kenaf fibers/epoxy systems were evaluated using the combination of micromechanical technique, microdroplet test to find out an optimal condition in accordance with final purpose by comparing to each other. Clamping effect on fiber elongation was determined as well. In addition, the mechanical properties of the natural fibers were investigated using single fiber tensile test and analyzed statistically by both uni- and bimodal Weibull distributions. Microfailure modes of different natural fiber structures were observed using optical microscope.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.262-264
• /
• 2005

This paper is concerned with a fracture strength study of composite adhesive lap joints. The tests were carried out on specimen joints manufactured hybrid stacked joints such as the polyester and bamboo natural fiber layer. The main objective of the work was to test the fracture strength using hybrid fiber composites with a polyester and bamboo natural fiber layer adjacent to the spew fillet of adhesive bonded joints and hybrid stacked joints. The results are presented using tensile-shear strength graph and finite element analysis. The failure mechanisms are discussed in order to explain that spew fillet at the end of the overlap reduces greatly the adhesive shear and effects the tensile-shear strength in hybrid stacked joints.

• 접착 및 계면
• /
• 제10권1호
• /
• pp.23-29
• /
• 2009

두 종류의 천연섬유, 즉 면섬유와 목분을 이용하여 제조한 폴리프로필렌 - 천연섬유 복합재료의 혼합가공시 유변학적 특성과 열적특성에 미치는 상용화제의 영향을 고찰하였다. 상용화제로는 무수말레인산이 그래프팅된 폴리프로필렌 공중합체를 사용하였다. 천연섬유의 종류에 관계없이 상용화제를 첨가할 때, 전반적으로 상용화제의 함량이 증가함에 따라 토오크 값이 상승함이 확인되었다. 또한, 시차 주사 열량계(DSC)와 X선 회절분석(XRD)을 통해 상용화제의 첨가시 복합재료의 결정화도가 약간 상승함이 확인되었다. 섬유의 종류에 따른 영향은 거의 관찰되지 않았으나, 혼합시 유변학적 물성, DSC 및 XRD 결과에 의하면, 면섬유의 경우가 목분보다는 PP-g-MAH와 더 나은 상호작용을 보이는 것으로 생각된다.

• Composites Research
• /
• 제28권3호
• /
• pp.118-123
• /
• 2015

In the current study explain about the bio-based composites made by groundnut shell as reinforcement with polyester resin matrix. Groundnut shell is an abundantly available natural waste byproduct and poly ester resin is widely used to fabricate of composites for good balance of mechanical properties because it is relatively low price and ease of handling. Evaluate the mechanical properties of manufactured groundnut shell/polyester composites by varying the amounts (wt %) of groundnut shell. Particulate shell reinforced polyester composites incorporating varying amounts of groundnut shell (5, 10, 15 and 20%) were characterized for their tensile strength, flexural strength, and impact strength. The mechanical properties improved with increasing particle loading up to 15% and decreased thereafter. Increasing in strength with increased particle shell loading was attributed to increase in surface area which enhanced load transfer between the polyester matrix and ground shall particulates. Scanning electron microscopic studies have been carried out to study the morphology of the composite. Thermal studies and water absorption properties of the composites also studied in this paper.

• 접착 및 계면
• /
• 제18권3호
• /
• pp.118-126
• /
• 2017

천연섬유강화 복합재료에서 여러 가지 섬유표면 개질을 통해서 천연섬유와 고분자매트릭스 사이에 계면접착과 복합재료 특성을 향상시키고자 하는 많은 연구 노력이 있었다. 본 연구에서는 폐양모섬유 강화 폴리프로필렌 매트릭스 복합재료를 압축성형공정 방법으로 제조하였고, 그들의 기계적 특성 및 충격 특성을 분석하였다. 그 결과, 폐양모/폴리프로필렌 복합재료의 인장 및 굴곡 특성 그리고 충격강도는 수산화나트륨(NaOH)을 이용한 알칼리처리와 3-glycidylpropylsilane(GPS)을 이용한 실란처리와 같은 처리매체에 크게 의존하였다. 실란처리를 한 폐양모섬유를 포함한 복합재료는 알칼리처리를 한 폐양모섬유를 포함한 것보다 더 우수한 기계적 특성과 충격저항성을 나타내었다. 복합재료 파단면은 특성 증가가 폐양모섬유와 폴리프로필렌 매트릭스 사이에 계면결합의 향상에 의한 것임을 정성적으로 뒷받침해주었다.

• Restorative Dentistry and Endodontics
• /
• 제43권2호
• /
• pp.22.1-22.9
• /
• 2018

Objectives: To evaluate and compare light-transmittance in dental tissues and dental composite restorations using the incremental double-layer technique with varying layer thickness. Materials and Methods: B1-colored natural teeth slabs were compared to dental restoration build-ups with A2D and B1E-colored nanofilled, supra-nanofilled, microfilled, and microhybrid composites. The enamel layer varied from 0.3, 0.5, or 1.2 mm thick, and the dentin layer was varied to provide a standardized 3.7 mm overall sample thickness (n = 10). All increments were light-cured to $16J/cm^2$ with a multi-wave LED (Valo, Ultradent). Using a spectrophotometer, the samples were irradiated by an RGB laser beam. A voltmeter recorded the light output signal to calculate the light-transmittance through the specimens. The data were analyzed using 1-way analysis of variance followed by the post hoc Tukey's test (p = 0.05). Results: Mean light-transmittance observed at thicker final layers of enamel were significantly lower than those observed at thinner final layers. Within 1.2 mm final enamel resin layer (FERL) thickness, all composites were similar to the dental tissues, with exception of the nanofilled composite. However, within 0.5 mm FERL thickness, only the suprananofilled composite showed no difference from the dental tissues. Within 0.3 mm FERL thickness, none of the composites were similar to the dental tissues. Conclusions: The supra-nanofilled composite had the most similar light-transmittance pattern when compared to the natural teeth. However, for other composites, thicker FERL have a greater chance to match the light-transmittance of natural dental tissues.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1996년도 재료학회 춘계학술발표회
• /
• pp.128-128
• /
• 1996

• Elastomers and Composites
• /
• 제31권5호
• /
• pp.347-352
• /
• 1996

A natural rubber was blended with a butadiene rubber with different ratios. A natural rubber, along with three different blends, its ratio varying from 10 to 15 to 20 weight %, were prepared and tested. It was found that inclusion of the butadiene rubber increased cure time, compared to the natural rubber. It is speculated that increased free volume due to the inclusion of butadiene rubber contributed to this effect. Furthermore, inclusion of butadiene rubber led to increase hardness of a sphere, and as a result, the extent of rebound increased sharply.

• 접착 및 계면
• /
• 제6권2호
• /
• pp.13-20
• /
• 2005

환경 친화적인 자연섬유 강화 고분자 복합재료의 계면 전단강도는 총체적인 기계적 물성을 조절하는데 매우 중요한 역할을 수행한다. Ramie와 Kenaf 섬유 강화 에폭시 복합재료의 계면 전단강도는 최종 물성을 위한 최적 조건을 찾아내기 위해 미세역학시험법과 비파괴 음향방출시험을 이용하여 평가했다. Ramie와 Kenaf 섬유의 동적 접촉각을 측정했고, 계면 접착에서 젖음성과 상호 관련시켜서 해석하였다. Ramie와 Kenaf 섬유의 기계적 물성은 단섬유 인장시험을 통해 조사했고, 통계학적으로 uni-와 bimodal Weibull 분포를 통해서 분석하였다. Ramie와 Kenaf 섬유에 대한 실제 신장율의 clamping 효과의 영향도 평가할 수 있었다. 두 가지의 다른 미세파괴 형상은 섬유다발과 단섬유 복합재료로부터 오는 축방향의 debonding과 섬유상의 fracture는 인장과 압축하중하에서 관찰할 수 있었다.

• Advanced Composite Materials
• /
• 제16권2호
• /
• pp.83-94
• /
• 2007

Woven sisal textile fiber reinforced composites were used to evaluate fracture toughness, tensile and three-point bending. The water absorption testing of all specimens was repeated five times in this study. All specimens were immersed in pure water during 9 days at room temperature, and dried in 1 day at $50^{\circ}C$. Two kinds of polymer matrices such as epoxy and vinyl-ester were used. Fractured surfaces were taken to study the failure mechanism and fiber/matrix interfacial adhesion. It is shown that it can be enhanced to improve their mechanical performance to reveal the relationship between fracture toughness and water absorption fatigue according to different polymer matrices. Water uptake of the epoxy composites was found to increase with cycle times. Mechanical properties are dramatically affected by the water absorption cycles. Water-absorbed samples showed poor mechanical properties, such as lower values of maximum strength and extreme elongation. The $K_{IC}$ values demonstrated a decrease in inclination with increasing cyclic times of wetting and drying for the epoxy and vinyl-ester.