• Elastomers and Composites
• /
• 제58권3호
• /
• pp.128-135
• /
• 2023

To improve the adhesive strength of natural rubber (NR) for a seismic isolation damper, citraconic acid-g-NR (CCA-g-NR) was synthesized via the melt grafting of citraconic acid (CCA) onto NR using an azobisisnomerobutyronitrile (AIBN) initiator. Subsequently, the influence of CCA and AIBN concentrations on the graft ratio G/R (%) and graft efficiency G/E (%) of the CCA-g-NR was investigated. The optimum CCA and AIBN concentrations required to achieve the desired G/R (3.49%) and G/E (49.8%) were found to be 7 phr and 0.13 phr, respectively. Additionally, we studied the influence of CCA-g-NR concentration on the mechanical properties (tensile strength, elongation at break, and modulus at 300%), adhesive strength, and cure characteristics of the rubber compound in the seismic isolation damper. As the concentration of CCA-g-NR increased, the elongation at break and adhesive strength of the compound increased, whereas its tensile strength and modulus at 300% decreased. Moreover, as the concentration increased, the maximum torque decreased and the scorch time was delayed to obtain an optimal vulcanization time.

• Elastomers and Composites
• /
• 제32권5호
• /
• pp.302-308
• /
• 1997

Over 1953/54 Karl Ziegler and Giulio Natta independently discovered new types of catalyst. Thus it was able to produce synthetic cis-polyisoprene rubber which has same properties like natural rubber, since then the amount of consumption was increased rapidly. The problem of disposing of used rubbers has become acute in recent years. cis-Polyisoprene was degraded in supercritical tetrahydrofuran and degree of degradation and product were observed by GPC, FT-IR, GC-MS analyses. As a result, degradation of cis-polyisoprene had small dependency upon the operating pressure, and was inhibited in concentration increase. And cis-polyisoprene was degraded into narrow molecular weight distribution oligomer in 3 hours, and more than 10 organic compounds were produced.

• Elastomers and Composites
• /
• 제32권5호
• /
• pp.325-329
• /
• 1997

Microbial treatment of the powdered waste tire was studied to recycle the waste tires. Chemoautotrophic acidophilic, iron-oxidizing bacterium was employed to unvulcanize the powdered tires. Biotreated rubber powder was compared to a untreated and a chemically treated powder. The results showed sulfur content of rubber powder(1.33%) were decreased to 1.22% by chemical treatment and 1.12% by microbial treatment for 20 days, 0.88%, for 30 days. One of the problems of the powdered utilization of the waste tires is that rubber powder leads to decrease mechanical properties when it is compounded with other virgin polymers. When tee biotreated powder was compounded with natural rubber, the mechanical properties were less decreased when untreated or chemically treated powder. Therefore, the microbial treatment can be one of useful methods to recycle the waste tire.

• Geomechanics and Engineering
• /
• 제5권2호
• /
• pp.87-97
• /
• 2013

In this paper, a novel fibrous material known as axially reinforced braided composite rods (BCRs) have been developed for reinforcement of soils. These innovative materials consist of an axial reinforcement system, comprised of longitudinally oriented core fibres, which is responsible for mechanical performance and, a braided cover, which gives a ribbed surface texture for better interfacial interactions with soils. BCRs were produced using both thermosetting (unsaturated polyester) and thermoplastic (polypropylene) matrices and synthetic (carbon, glass, HT polyethylene), as well as natural (sisal) core fibres. BCRs were characterized for tensile properties and the influence of core fibres was studied. Moreover, BCRs containing carbon fibre in the core composition were characterized for piezoresistivity and strain sensing properties under flexural deformation. According to the experimental results, the developed braided composites showed tailorable and wide range of mechanical properties, depending on the core fibres and exhibited very good strain sensing behavior.

• Bulletin of the Korean Chemical Society
• /
• 제29권6호
• /
• pp.1121-1124
• /
• 2008

A carbon composite was synthesized by mechanical mixing of ball-milled graphite and PVC powders, followed by pyrolysis reaction of PVC. Natural graphite ball milled under atmosphere of argon or air leads to a disordered structure. It appears that the electrochemical lithium intercalation reaction is dependent on the atmosphere in which the graphite is ball milled. The carbon composite obtained using air-milled graphite shows a high reversible capacity and high initial coulombic efficiency compared to argon-milled graphite. This is attributed to the enhanced thermal stability of a disordered structure in the air milled sample. For the one with air-milled graphite, the disordered structure is maintained during heat treatment, while argon-milled graphite is partially crystallized.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1991년도 가을 학술발표회 논문집
• /
• pp.121-126
• /
• 1991

In his recent book, D.H. Kim proposes to use the quasi-isotropic constants by Tsai for the preliminary design of the composite primary structures for the civil construction. Such structures generally require a large number of laminae layers. Simple equations which can predict "exact" values of the buckling strength, the natural frequency of vibration, and the deflection for the special orthotropic laminates are presented. Many laminates with certain orientations lave decreasing values of B$\_$16/ and B$\_$26/ as the number of plies increases. Such laminates, with D$\_$16/=D$\_$26/\longrightarrow0, including the laminates with anti-symmetric configurations can be solved by the same equation for the special orthotropic laminates. If the quasi-isotropic constants are used, the equations for the Isotropic plates can be used. Use of some coefficients can produce "exact" value for laminates with such configuration.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.131-134
• /
• 2002

Supersonic flutter analysis of cylindrical composite panels with structural damping treatments has been performed using the finite element method based on the layerwise shell theory. The natural frequencies and loss factors of cylindrical viscoelastic composites are computed considering the effects of transversely shear deformation. The panel flutter of cylindrical composite panels is analyzed considering structural damping effect. Various damping characteristics for unconstrained layer damping, constrained layer damping, and symmetrically co-cured sandwich laminates are compared with those of an original base panel in view of aeroelastic stabilities.

• Elastomers and Composites
• /
• 제16권4호
• /
• pp.211-216
• /
• 1981

A series of conveyer rubber belts has been made by blending natural rubber(NR), styrene butadiene rubber(SBR), chloroprene rubber(CR) and additives on nylon cords, and their respective flammability has been investigated. It has been observed that: 1. By adding an antiflame agent to the belt, in addition to 70% chlorinated paraffine and antimony oxide($Sb_{2}O_{3}$), the inflammability is improved remarkably to O - 2 seconds due to the synergistic effect, while a sample without antiflame B fails to pass the KS M 6678 test. 2. Physical properties, such as tensile strength, elongation at break and adhesion strength, of the sample belts have been studies by varying ratios of NR/CR from 20 to 100, and it has been observed that the higher ratios have the better physical properties.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.288-288
• /
• 2006

Natural rubbers (NR) reinforced by multi-wall carbon nanotubes (MWCNT) was found to show extraordinary improvement of mechanical property. We speculated that this was owing to the interfacial phase that surrounded CNT and investigated about the phase by atomic force microscopy (AFM). Using force modulation mode and force-distance curve analyses, we succeeded in obtaining the information of its nanometer-scale rheological property. We found that was actually surrounded by the interfacial phase, that had softer modulus than NR matrix.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.357-357
• /
• 2006

Many industrial sources of proteins can be used as raw materials to produce films, molded materials, and various hollow items either by "casting" techniques or by "thermoplastic processing". Combining proteins with natural fibbers, paper or biodegradable polyesters is very promising to form biodegradable composites witch take advantage of the barrier and mechanical properties of each component. Using nano-fillers to form nanocomposites has also been shown to be interesting to improve properties. Production, with low transformation cost, of protein based materials to form biodegradable materials with controlled functional properties for food uses, medical uses, packaging, agriculture, controlled release systems, etc. is discussed.