• Journal of the Korea Society for Simulation
• /
• v.19 no.4
• /
• pp.51-58
• /
• 2010

SIP is a flexible and extensible call setup protocol that may be combined with other protocols used in the Internet to make various services like voice communication. Voice communication can be classified into normal calls used for communication between common users and emergency calls for 112, 119 and other services through public safety networks. It is required to research to process effectively these normal calls and emergency calls through public networks such as the Internet. In this paper, we propose a bypass scheme for emergency calls by giving priority to INVITE messages for them and processing them with priority in the SIP proxy queue. We perform simulation studies using the network simulator ns-2 for the performance evaluation. Simulation results show that the proposed scheme processes emergency calls faster than normal calls and thus it is expected to make a special purpose network like the national disaster network efficiently by using the existing Internet.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.609-616
• /
• 2023

In a wireless network environment, since sensors are not always connected to power, the life of a battery, which is an energy source supplied to sensors, is limited. Therefore, various studies have been conducted to extend the network life, and a layer-based routing protocol, LEACH(: Low-energy Adaptive Clustering Hierarchy), has emerged for efficient energy use. However, the LEACH protocol, which transmits fused data directly to the sink node, has a limitation in that it consumes as much energy as the square of the transmission distance when transmitting data. To improve these limitations, this paper proposes an algorithm that can minimize the transmission distance with multi-hop transmission where cluster heads are chained between cluster heads through relative distance calculation from sink nodes in every round.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.406-409
• /
• 2022

In recent years, the developments in technologies, such as AI systems, Blockchain, VR/AR, 3D printing, robotics, and nanotechnology, are reshaping the future of healthcare right before our eyes. And also, healthcare has seen a paradigm shift towards prevention-oriented medicine, with a focus on consumers requirements. The spread of infectious diseases such as Covid-19 have altered the definition of healthcare and treatment facilities, necessitating immediate action to redesign hospitals' physical environments, adapt communication models to address social distancing requirements, implement virtual health solutions, and establish new clinical protocols. Hospitals, which have traditionally served as the hub of healthcare systems, are pursuing or being forced to reestablish themselves against this landscape. Rather than only treating ailments, future healthcare is predicted to focus on wellness and prevention. In personalized care, long-term prevention strategies, remote monitoring, early diagnosis, and detection are critical. Given the growing interest in smart healthcare defined by these modern technologies, this study looked into the definitions and service kinds of smart healthcare. The background and technical aspects of smart hospitals were also explored through a literature review.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.5
• /
• pp.595-605
• /
• 2023

With the escalating prevalence of modular construction projects, there is a concurrent surge in scholarly and industrial intrigue in this domain, leading to a broadened spectrum of its applications. Modular construction, inherently facilitated by controlled factory settings, boasts the capability to consistently deliver edifices of superior quality. To optimize this advantage, the judicious integration of quality assurance methodologies during the site-specific phases of lifting and assembly is non-negotiable. This research embarked on a survey directed at project stakeholders, aiming to gauge the perceived significance and efficaciousness of prevailing quality preservation and oversight protocols during the aforementioned site stages, subsequently employing the Importance-Performance Analysis(IPA) for data interpretation. The findings elucidated that, while a majority of quality assurance procedures were adeptly executed, perceptual disparities existed among stakeholders regarding certain aspects, prompting recommendations for enhancement. This investigative endeavor lays a foundation, aiding future studies in amplifying the quality assurance cognizance among professionals during modular construction's site-assembly phase.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.5
• /
• pp.639-650
• /
• 2023

In this research endeavor, we engaged with 70 construction safety specialists from established construction firms through surveys and interviews. The primary aim was to dissect and understand the weight and ramifications of specific cost items within the Occupational Safety and Health Management Funds(OSHMF) and Safety Management Expenses(SME). From our analysis, salient insights emerged. Within the realm of OSHMF, the cost items associated with safety facilities and the remunerations of safety managers were identified as paramount. It was observed that there are marked variations in the perceived significance and repercussions associated with diverse cost items of OSHMF. In stark contrast, when assessing the SME, the nuances in perceived weight and consequences of individual cost items were relatively muted, suggesting a more uniform viewpoint among the experts. Furthermore, our research probed the interrelationship between the significance and repercussions within OSHMF and SME domains. Notably, OSHMF manifested a positive linear relationship, suggesting that cost items of higher importance invariably had a more pronounced effect. On the other hand, the SME showcased a more subtle association, hinting at intricate underlying dynamics. The outcomes of this investigation are poised to offer instrumental guidance for enhancing safety protocols and diminishing accident occurrences in domestic construction undertakings.

• Archives of Plastic Surgery
• /
• v.51 no.2
• /
• pp.156-162
• /
• 2024

Background Perioperative management in autologous breast reconstruction has gained focus in recent years. This study compares two pain management protocols in patients undergoing abdominal-based free flap breast reconstruction: a past protocol (PP) and a current protocol (CP)-both intended to reduce opioid consumption postoperatively. The PP entails use of a pain catheter in the abdominal wound and the CP consists of an intraoperative nerve block in addition to refinements in the oral pain management. We hypothesize that the CP reduces opioid consumption compared to PP. Methods From December 2017 to January 2020, 102 patients underwent breast reconstruction with an abdominal-based free flap. Two postoperative pain management strategies were used during the period; from December 2017 to September 2018, the PP was used which entailed the use of a pain catheter with ropivacaine applied in the abdominal wound with continuous distribution postoperatively in addition to paracetamol orally and oxycodone orally pro re nata (PRN). From October 2018 to January 2020, the CP was used. This protocol included a combination of intraoperative subfascial nerve block and a postoperative oral pain management regime that consisted of paracetamol, celecoxib, and gabapentin as well as oxycodone PRN. Results The CP group (n = 63) had lower opioid consumption compared to the PP group (n = 39) when examining all aspects of opioid consumption, including daily opioid usage in morphine milligram equivalents and total opioid usage during the stay (p < 0.001). The CP group had shorter length of hospital stay (LOS). Conclusion Introduction of the CP reduced opioid use and LOS was shorter.

• Hip & pelvis
• /
• v.35 no.3
• /
• pp.200-205
• /
• 2023

Purpose: The aim of this study was to assess the current status of venous thromboembolism (VTE) prevention in Korean patients with hip fractures. Materials and Methods: A survey using a questionnaire on the experiences and protocols of VTE prevention was conducted among 570 members of the Korean Hip Society. Results: A total of 97 surgeons responded, with a response rate of 17.0%. Of the 97 participants, 61.9% answered that they had encountered one or more cases of symptomatic VTE in the past year. Mechanical prophylaxis was applied most often (30.9%) until the point of ambulation in standard-risk patients and most often (34.0%) extended until discharge in high-risk patients. Chemical prophylaxis was most often prescribed for a particular period of time rather than for recovery of walking ability (24.7% in standard-risk patients and 26.8% in high-risk patients). Dual prophylaxis was administered in the standard-risk group by 58.8% of the participants and in the high-risk group by 83.5%. Among the participants, 73.2% answered that they had been attentive to wound complications during chemical prophylaxis. More than half of the participants (59.8%) reported that they did not perform routine screening for VTE after surgery. Conclusion: The results of our survey provided information regarding the current status of VTE prevention for patients undergoing surgery for treatment of hip fractures in Korea as well as a baseline for establishment of educational programs and guidelines in the future.

• Journal of Korean Critical Care Nursing
• /
• v.17 no.2
• /
• pp.42-54
• /
• 2024

Purpose : This study aimed to assess the effectiveness of an advanced practice nurse (APN)-driven ventilator weaning protocol for patients undergoing cardiac surgeries. Methods : A retrospective analysis was conducted on 226 patients admitted to the intensive care unit (ICU) of a tertiary hospital between January and June 2020, following a cardiac surgery. Patients were divided into an APN protocol-applied group (experimental group, n=152) and a control group managed based on doctors' judgment (n=74). Ventilator weaning criteria and clinical outcomes, including duration of ventilation, length of ICU stay, and rate of reintubation, were compared between the two groups. Results : Patients in the control group were older and had a higher incidence of massive bleeding from chest tube drainage (>100 cc/hr) at baseline. The average duration of ventilation was significantly shorter in the experimental group compared to the control group (7.44 vs. 21.61 hours, p <.001). Furthermore, the mean length of ICU stay was shorter in the experimental group compared to the control group (47.96 vs. 77.97 hours, p <.001). There was no difference in the rate of reintubation between the two groups. Conclusion : These findings suggest that an APN-driven ventilator weaning protocol can improve clinical outcomes without significant complications. These results support the adoption of APN-driven mechanical ventilator weaning protocols in clinical practice.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.3
• /
• pp.259-267
• /
• 2004

Purpose: NEMA NU2-2001 was proposed as a new standard for performance evaluation of whole body PET scanners. in this study, system performance of Siemens CTI ECAT EXACT 47 PET scanner including spatial resolution, sensitivity, scatter fraction, and count rate performance in 2D and 3D mode was evaluated using this new standard method. Methods: ECAT EXACT 47 is a BGO crystal based PET scanner and covers an axial field of view (FOV) of 16.2 cm. Retractable septa allow 2D and 3D data acquisition. All the PET data were acquired according to the NEMA NU2-2001 protocols (coincidence window: 12 ns, energy window: $250{\sim}650$ keV). For the spatial resolution measurement, F-18 point source was placed at the center of the axial FOV((a) x=0, and y=1, (b)x=0, and y=10, (c)x=70, and y=0cm) and a position one fourth of the axial FOV from the center ((a) x=0, and y=1, (b)x=0, and y=10, (c)x=10, and y=0cm). In this case, x and y are transaxial horizontal and vertical, and z is the scanner's axial direction. Images were reconstructed using FBP with ramp filter without any post processing. To measure the system sensitivity, NEMA sensitivity phantom filled with F-18 solution and surrounded by $1{\sim}5$ aluminum sleeves were scanned at the center of transaxial FOV and 10 cm offset from the center. Attenuation free values of sensitivity wire estimated by extrapolating data to the zero wall thickness. NEMA scatter phantom with length of 70 cm was filled with F-18 or C-11solution (2D: 2,900 MBq, 3D: 407 MBq), and coincidence count rates wire measured for 7 half-lives to obtain noise equivalent count rate (MECR) and scatter fraction. We confirmed that dead time loss of the last flame were below 1%. Scatter fraction was estimated by averaging the true to background (staffer+random) ratios of last 3 frames in which the fractions of random rate art negligibly small. Results: Axial and transverse resolutions at 1cm offset from the center were 0.62 and 0.66 cm (FBP in 2D and 3D), and 0.67 and 0.69 cm (FBP in 2D and 3D). Axial, transverse radial, and transverse tangential resolutions at 10cm offset from the center were 0.72 and 0.68 cm (FBP in 2D and 3D), 0.63 and 0.66 cm (FBP in 2D and 3D), and 0.72 and 0.66 cm (FBP in 2D and 3D). Sensitivity values were 708.6 (2D), 2931.3 (3D) counts/sec/MBq at the center and 728.7 (2D, 3398.2 (3D) counts/sec/MBq at 10 cm offset from the center. Scatter fractions were 0.19 (2D) and 0.49 (3D). Peak true count rate and NECR were 64.0 kcps at 40.1 kBq/mL and 49.6 kcps at 40.1 kBq/mL in 2D and 53.7 kcps at 4.76 kBq/mL and 26.4 kcps at 4.47 kBq/mL in 3D. Conclusion: Information about the performance of CTI ECAT EXACT 47 PET scanner reported in this study will be useful for the quantitative analysis of data and determination of optimal image acquisition protocols using this widely used scanner for clinical and research purposes.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.3
• /
• pp.83-98
• /
• 2004

The purpose of this study was to investigate the test-retest of plantar pressures using the F-Scan system over speeds and plantar regions. 6 healthy female subjects in 20's were recruited for the study. Plantar pressure measurements during locomotor activities can provide information concerning foot function, particularly if the timing and magnitude of the loading profile can be related to the location of specific foot structures such as the metatarsal heads. The Tekscan F-Scan system consists of a flexible, 0.18mm thick sole-shape having 1260 pressure sensors, the sensor insole was trimmed to fit the subjects' right. left shoes - sneakers shoes & dress shoes. It was calibrated by the known weight of the test subject standing on one foot. The Tekscan measurements show the insole pressure distribution as a function of the time. This finding has important implications for the development of plantar pressure test protocols where the function of the forefoot is important. According to the result of analysis it is as follows 1) Center of force trajectory in women's dress shoes display direct movement, compare with center of force trajectory in Sneaker shoes displays a little bit curved slow pronation movement. Sneaker shoes in forefoot part display very quick supination movement, therefore, this shoes effects negative effectiveness for ankle's stability Considering center of force trajectory analyzing the more center of force close straight line, the more movement can be quick movement for locomotion. For foot pressure distribution, center of force trajectory in locomotion is better to curved trajectory with pronation movement. So sneaker shoes style is good shoes considering center of pressure distribution trajectory compare with women's dress shoes. 2) Women's dress shoes increased peak pressure in medial, this is effected by high hill's height. The more increased women's dress shoes's height, the more women's peak pressure will increase, pronation can increase compare with before. Supination movement increase, this focused pressure in lateral, also, supination increased more. If the supination movement increased, foot pressure focused in lateral, therefore, it is appeared force distribution in gait direction. This is bad movement in foot's stability. 3) Women's dress shoes in landing phase displayed a long time, this is when women's dress shoes wear, gait movement is unbalance, so, landing phase displayed a long time. For compensation in gait, swing phase quick movement. 4) Women's dress shoes displayed peak pressure distribution in lateral of rearfoot part, Sneakers shoes displayed peak pressure distribution in medial of forefoot part. Its results has good impact absorption compare with women's dress shoes. In forefoot part, sneakers shoes has good propulsive force compare with women's dress shoes.