• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.12
• /
• pp.1864-1871
• /
• 2012

This paper proposes the hybrid proportional integral(HBPI) controller for maximum power point tracking(MPPT) control of photovoltaic system. The output characteristics of the solar cell are a nonlinear and affected by a temperature, the solar radiation and influence of a shadow. The MPPT control is a very important technique in order to increase an output and efficiency of the photovoltaic system. The conventional constant voltage(CV), perturbation and observation(PO) and incremental conductance(IC) are the method which finding maximum power point(MPP) by the continued self-excitation vibration, and uses the fixed step size. If the fixed step size is a large, the tracking speed of maximum power point is faster, but the tracking accuracy in the steady state is decreased. On the contrary, when the fixed step size is a small, the tracking accuracy is increased and the tracking speed is slower. Therefore, in order to solve these problems, this paper proposes HBPI controller that is adjusted gain of conventional PI control using fuzzy control, and the maximum power point tracks using this controller. The validity of the controller proposed in this paper proves through the results of the comparisons.

• International Journal of Control, Automation, and Systems
• /
• v.2 no.2
• /
• pp.201-206
• /
• 2004

Counters for the various kinds of banknotes require high-speed distinctive point extraction and recognition. In this paper we propose a new point extraction and recognition algorithm for Euro banknotes. For distinctive point extraction we use a coordinate data extraction method from specific parts of a banknote representing the same color. To recognize banknotes, we trained 5 neural networks. One is used for inserting direction and the others are used for face value. The algorithm is designed to minimize recognition time by using a minimal amount of recognition data. The simulated results show a high recognition rate and a low training period. The proposed method can be applied to high speed banknote counting machines.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.6
• /
• pp.11-18
• /
• 2014

Vulnerable areas by non-point source pollution and prioritizing control areas were researched using hydrological and geomorphological data, non-point source loads, and water quality data. Using overlay analysis, vulnerable areas were graded with various scenarios. Vulnerable areas were selected near the metro city with impermeable landuse because non-point source loads and water quality data had influence on overlay analysis to rank vulnerable area. Analysis scenarios and weighted values can be changed under regional characteristics and given conditions.

• Proceedings of the KIEE Conference
• /
• 2007.11b
• /
• pp.226-228
• /
• 2007

This paper proposes Nonlinear Interior Point Method (NIPM) including discrete control variables optimal power flow formulations. The algorithm utilizes the robustness in terms of starting point and fast convergence for large scale power system of NIPM and an introduction of rounding penalty function which is augmented in the Lagrangian function to handle discrete control variables. The derived formulation shows a simplified approach to deal with discrete control problems which is implementable in real large scale systems.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.2
• /
• pp.216-223
• /
• 2018

Since solar cells have non-linear voltage-current output characteristics, Photovoltaic systems require the Maximum Power Point Tracking(MPPT) function. For this reason, a large number of MPPT techniques have been studied. However, the conventional MPPT techniques may fail to track the maximum power point when partial shading occurs in the solar cell array due to its characteristics. Therefore, it is necessary to research the MPPT technique that can follow the maximum power point in the partial shadow condition. In this paper, the characteristics of solar cell arrays in partial shadowing are analyzed and the MPPT technique which can follow the maximum power point in partial shadow condition has been proposed. To validate the proposed MPPT method, simulation and experimentation results are provided.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.2
• /
• pp.152-158
• /
• 2005

This paper describes a reactive optimal power flow incorporating margin enhancement constraints. Margin sensitivity at a steady-state voltage instability point is calculated using invariant space parametric sensitivity, and it can provide valuable information for selection of effective control parameters. However, the weakest buses in neighboring regions have high margin sensitivities within a certain range. Hence, the control determination using only the sensitivity information might cause violation of operational limits of the base operating point, at which the control is applied to enhance voltage stability margin in the direction of parameter increase. This paper applies an interior point method (IPM) to solve the optimal power flow formulation with the margin enhancement constraints, and shunt capacitances are mainly considered as control variables. In addition, nonlinearity of margin enhancement with respect to control of shunt capacitance is considered for speed-up control determination in the numerical example using the IEEE 118-bus test system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.515-519
• /
• 2005

Pitch period that is a important factor in speech signal processing is used in various applications such as speech recognition, speaker identification, speech analysis and synthesis. So many pitch detection algoritms have been studied until now. AMDF which is one of pitch period detection algorithms chooses the time interval from valley point to valley point as pitch period. In selection of valley point to detect pitch period, complexity of the algoritm is increased. So in this paper we proposed the simple algorithm using modified AMDF that detects global minimum valley point as pitch period of speech signal and compared existing methods with it through simulation.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.285-286
• /
• 2011

Maximum Power Point Tracker (MPPT) is the big issue in generating power based on Wind Energy Conversion System. In case of unknown turbine characteristic, it is useful to implement MPPT based on fuzzy logic control. This kind of control is able to find the value of duty cycle to meet maximum power point at particular wind speed. There are many methods to develop MPPT based fuzzy logic controls. In this paper, two of the methods are compared both at low and high fluctuating wind speed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.9
• /
• pp.957-963
• /
• 2014

This paper proposes a predictive control for an efficient human following robot using Kinect sensor. Especially, this research is focused on detecting of foot-end-point and foot-vector instead of human body which can be occluded easily by the obstacles. Recognition of the foot-end-point by the Kinect sensor is reliable since the two feet images can be utilized, which increases the detection possibility of the human motion. Depth image features and a decision tree have been utilized to estimate the foot end-point precisely. A tracking point average algorithm is also adopted in this research to estimate the location of foot accurately. Using the continuous locations of foot, the human motion trajectory is estimated to guide the mobile robot along a smooth path to the human. It is verified through the experiments that detecting foot-end-point is more reliable and efficient than detecting the human body. Finally, the tracking performance of the mobile robot is demonstrated with a human motion along an 'L' shape course.

• Journal of Mechanical Science and Technology
• /
• v.16 no.8
• /
• pp.1079-1088
• /
• 2002

Motivated by the dynamic output feedback passification results, point-to-point control laws for an elastic joint robot are presented when only the position measurements are available. The proposed method makes a parallel connection of the robot system and an input-dimensional linear system which obtains the effect of the desired differentiators. It is shown that the closed-loop nonlinear robot system can be rendered output strictly passive and the regulation of the system is achieved in the end. Robustness analysis is also given with regard to uncertainties on the robot parameters. Performance of the proposed control law is illustrated in the simulation studies of a manipulator with three revolute elastic joints.