• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1363-1368
• /
• 2003

The subject of the national new Technology certification system is in which domestic enterprise have competition above international market. Rep. of the korea Government Ministry of Information and communication(MIC), Ministry of science and technology(MOST), Ministry of Commerce, Industry and energy(MOCIE), Ministry of Construction and Transportation(MOCT), Ministry of Marin and fishery(MOAf) executive the certification Regulations. These Ministry have the new Technology certification rules each of the scope of the their nam job. These rules same the subject, proposal qualification and the property, but difference certification reference. So, this article suggestions about new Technology certification system.

• Journal of Aerospace System Engineering
• /
• v.13 no.1
• /
• pp.62-68
• /
• 2019

The software installed on an aircraft is directly related to its safety. Therefore, it shall comply with the standards of the airworthiness certification to ensure safety of flight. Airborne software should be developed in accordance with the DO-178 (Software Consideration in Airborne Systems and Equipment Certification) to comply with the airworthiness certification criterion. However, the military airborne software has been developed in accordance with the DAPA weapons system software development and management manual. In this paper, we completed a questionnaire survey of software experts. We also suggest a military airborne software development/certification process based on DO-178.

• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.45-56
• /
• 2021

Demand for UAM (Urban Air Mobility) aircraft is rapidly increasing in countries around the world due to the problem of traffic congestion in urban areas. Through research and development, various e-VTOL aircraft concepts are being prepared for commercialization, for which airworthiness certification is required, since it is a manned transportation mode for people to board. Factors that pose a fatal threat to the safe operation of UAM aircraft include lightning strikes that can cause damage to structures and disturb the navigation system, as well as icing that impairs flight stability. Since the current UAM aircraft-related lightning and icing certification technology development is insufficient, there is need to develop appropriate airworthiness certification guidelines. In this study, after analyzing the laws and regulations related to aircraft by the FAA and the EASA, we tried to incorporate the lightning and icing certification guidelines for the UAM aircraft. We also analyzed the effects of lightning and icing on UAM aircraft using computational simulation, and presented the basis for establishing practical guidelines for the certification of UAM aircraft to be adopted in the future.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.3
• /
• pp.251-262
• /
• 2021

The airworthiness certification of lightning indirect effects becomes an important issue in personal air vehicles (PAVs), which are being actively developed around the world. PAVs are very vulnerable to lightning strikes, because of miniaturization, use of the electric engines, composite materials, and application of unmanned navigation systems. In this study, we first examined various steps of certifications for lightning indirect effects shown in AC 20 136B issued by the Federal Aviation Administration (FAA). We then applied certification guidelines for equipment transient design level listed in RTCA DO 160G Section 22 to PAVs and investigated lightning transient environments inside the PAVs. We also analyzed the aircraft level tests specified in SAE ARP 5416A by using electromagnetic computational analysis software EMA3D. Finally, we analyzed the actual transient level for PAVs and derived the data necessary for conformity certification.

• Journal of Digital Convergence
• /
• v.18 no.12
• /
• pp.81-86
• /
• 2020

This study aimed to speculate on Youtube for national certification education in makeup in the Untact period derived from the pandemic phenomenon such as the COVID 19. For the purpose, this study surveyed perception on Youtube on national certification education, characteristics of the programs, selection standards, continuance and recommendation intention and supplementations. The results are: The perception on Youtube was very positive(75.5%); Among characteristics, the mean value of informativeness was 3.54, that of play speed control as an advantage was 4.07 and that of feedback limit as a disadvantage was 3.64. In respect to selection standards, 44.5% of the subjects selected a program based on professionalism; 82.0% had continuance intention and 82.6% had recommendation intention. As for the needs of supplementation, the mean value of sanitation education was 4.20, that of updated regulations was 4.13 and that of feedback was 4.0. Therefore, it is suggested that if an interactive education system is supplemented in exact information and feedback, Youtube makeup certification programs will be further facilitated as useful education materials for makeup development.

• Land and Housing Review
• /
• v.8 no.3
• /
• pp.171-180
• /
• 2017

In 1990s, as the extreme weather events according to the global warming climate change are occurred frequently all around the world and the scale of the damage increases, the developed countries are promoting various policies for reducing greenhouse gas emissions setting the goal of greenhouse gas reduction with the level of State and local government. Especially for the greenhouse gas reduction of buildings and the inducement of eco-friendly design, the green certification system is strengthened with the assessment of energy and greenhouse management, and recently, according to the policy change of climate and energy, the certification system expanded from the buildings to the level of city and district is piloted. So this research is to understand the main contents and the assessment system of domestic green building certification system implemented in March 2013 in response to the policy change of climate and energy and to suggest the basic data for the improvement of present domestic greenhouse certification standard through the analysis of actual certification and the main case analysis of international green certification system. Recently in developed countries, in 1990s, for the reduction of building's greenhouse gas emission and the inducement of eco-friendly design, from the building of LEED, BREEAM, DGNB to the level of city and district such as LEED Neighborhood Development, BREEAM Communities, DGNB Stadtquartiere, the system is expanded and piloted. On the contrary, as for the domestic standard of green building certification system, the distribution ratio according to the assessment items in each category consists of the assessment system based on the buildings, and just the simple adjustment of some items and the improvement of weighted value are performed. Actually, as a result of selecting the 30 districts of apartment housing with the most certification performance by use among the 49 buildings certified by Institute of Land & Housing from December 2014 to July 2016 and analyzing the assessment score, the certification level is determined by the sectors of high distribution like indoor environment and energy not by the ineffective sector of external environment with low distribution so this system has a limitation to perform the practical means for the policy change of climate and energy. Thus for the national green building certification standards, the assessment system in the sector of external environment is to complemented and furthermore, reflecting domestic reality, through the introduction of certification system and the assessment system with the level of city and district, this system should be improved to meet the international certification standard.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.181-184
• /
• 2009

The technical expert standing system of our construction industry is operated by the Ministry of Labor subjective national technical qualification law, as the professional engineer, architect and architect-engineer and so on. The construction management(CM) which is introduced on middle 1990 activates a building industry the condition of the essential indispensability for is becoming, is not officially recognized with is judged as the nostril people for qualification of the civil CM educational institutions ha the certification which is a each educational program and a separate way and it is the actual condition which is become accomplished, In this research, it observes the capital increase reserve problem point which is a domestic CM and the certification integration which is a report and system anger it leads and with national certified qualification it develops to present the improvement program for, it does to sleep.

• KIEAE Journal
• /
• v.14 no.1
• /
• pp.91-99
• /
• 2014

Environmental issues have become gradually important around the globe, which has increased society needs for the environment-friendly construction. In an effort to realize the environmental protection and energy efficiency, the British BREEAM has been developed, which is followed by the USA LEED, Japanese CASBEE and other national certification systems based on their own conditions. In this end, the Republic of Korea has implemented its own certification system named GBCS(Green Building Certification System) in 2002, and now actively promoted the G-SEED(Green Standard for Energy and Environmental Design) after GBCS modifications and amendments. The purpose of this study is to identify possible problems to be encountered in the process of the G-SEED for office facilities and to provide relevant solutions. In this end, three office facilities have been selected, which had obtained the G-SEED. This study has analyzed reasons of change of assessment scores between the preliminary certification and the main certification phases, has identified problems through in-depth interviews with practicing professionals(design, construction, eco-friendly consulting firm) and then has reached a conclusion for improvements. This study will be possibly used as reference materials for improvements of the green building certification system, and further detailed studies on respective parts will be required for improvements.

• Journal of the Korea Convergence Society
• /
• v.7 no.6
• /
• pp.237-247
• /
• 2016

This study analyzed quantitative effects of ISMS certification. To measure the company value change the stock data was used and the methodology of event study was also applied. Event study methodology is a method of analyzing the effects of information or public announcement about certain events on the stock market through abnormal return of stock price. First, ISMS certification was acquired followed by the measurement of abnormal excess return of company. Based on the increase or decrease of abnormal excess return, the group was classified. There are 3 types of groups("Increase", "Reduce", "Maintain"). Next, the cluster analysis was performed for each group. Cluster analysis or clustering is the task of grouping a set of objects in such a way that objects in the same group (called a cluster) are more similar (in some sense or another) to each other than to those in other groups(clusters). The purpose of this study is to have a quantitative measurement of performance of ISMS certification. So, the result of this study will be promoted a company's ISMS certification acquisition. And it would further be beneficial to your company's information security activities.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.6
• /
• pp.131-138
• /
• 2014

The steel structure fabrication plant certification program was enacted as a part of the construction technology management act, article 24-3, to improve the quality of steel construction after the decay falling accident of Seongsu Bridge in 1994. However, the national certification program for structural precast concrete that is a prefabricated construction products produced by casting concrete in plant is not implemented yet. So, to introduce the proper certification system for precast concrete, the quality certification programs of North America, Europe and Japan are surveyed. In North America, the organizations that manage the plant certification programs are PCI, NPCA, CPCI and so on. Sales of precast concrete elements in Europe are governed by the construction products regulation 305/2011. Therefore, CE marking is mandatory from July 2013 for all construction products including precast concrete. In Japan, precast concrete products used in civil engineering are certificated by JIS mark, product certification system and plants for manufacturing precast concrete building elements are audited by Japan Prefabricated Construction Suppliers and Manufacturers Association. Based on these survey studies, in this paper is described an adaptation of precast concrete plant certification to comport with the certification system in Korea.