• Korean Journal of Food Science and Technology
• /
• v.54 no.1
• /
• pp.66-74
• /
• 2022

To improve the solubility of β-carotene, three types of β-carotene-loaded nanocapsules were prepared using chitosan (CS) and two cross-linkers, sodium tripolyphosphate (TPP) and hyaluronic acid (HA), alone or in combination (CS-TPP, CS-TPP-HA, and CS-HA). The entrapment efficiency of all nanocapsules significantly increased with an increase in TPP and HA, with the efficiency ranging from 95% to 99%. The solubility of β-carotene was significantly improved by CS nanoencapsulation before and after lyophilization and during storage. CS/HA nanoencapsulation significantly improved (by 11-fold) the water solubility of β-carotene. In particular, CS/HA nanoencapsulation was the most effective in terms of not only the solubility of β-carotene, but also the redispersibility ratio. Therefore, CS/HA encapsulation could be useful for improving the solubility of poorly soluble active ingredients, such as β-carotene.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.37 no.1
• /
• pp.43-53
• /
• 2011

The conditions in fluid-bed processor for nanoencapsulation of azelaic acid-milk nano powder for acne nanocosmetics were optimized by response surface methodology (RSM). The maximum value of yield was 70.97 %. The yield was appreciably influenced by inlet air temperature, atomizing pressure, and feeding speed. The particle size increased with an increase in the feeding speed and a decrease in the atomizing pressure. The elution rate in saline solutions was appreciably influenced by inlet air temperature and atomizing pressure. The moisture content increased with higher atomizing pressure, which was demonstrated to be similar to the nanoencapsulation characteristics related to water activity. The Hunter's L and b values increased with an increase in the inlet air temperature. The optimum conditions estimated by RSM for the maximized values of yield, moisture content, particle size and elution rate in skin suitability were $67{\sim}73^{\circ}C$ of inlet air temperature, 0.6 ~ 0.8 mL/min feeding speed and 1.8 ~ 2.0 kg/$cm^2$ of atomizing pressure, respectively. These estimated values were in agreement with those measured by real experiments.

• Polymer(Korea)
• /
• v.37 no.1
• /
• pp.15-21
• /
• 2013

Encapsulation of a paraffin wax core as a phase change material with polystyrene shell and the its thermal characteristics caused by the encapsulation were studied. For the nanoencapsulation, the miniemulsion polymerization method was selected. The factors affecting the thermal properties of prepared nanocapsule particles of phase change material were analysed in aspect of the structure of crosslinking agents, amounts of surfactant, ratio of paraffin wax to monomer, and hydrophilicity of initiators. It was assumed that Oswald ripening plays the most important role in the changes of particle size, particle morphology, and thermal capacity of nanocapsule core. It was elucidated that the thermal capacity was also dependent on the hydrophilicity and crosslinking density of polystyrene shell components.

• Food Science of Animal Resources
• /
• v.39 no.2
• /
• pp.309-323
• /
• 2019

Fish oil consists of omega-3 fatty acids which play an important role in human health. Its susceptibility to oxidation causes considerable degradation during the processing and storage of food products. Accordingly, encapsulation of this ingredient through freeze drying was studied with the aim of protecting it against environmental conditions. Gum arabic (GA) was used as the wall material for fish oil nanoencapsulation where tween 80 was applied as the emulsifier. A water-in-oil (W/O) emulsion was prepared by sonication, containing 6% fish oil dispersed in aqueous solutions including 20% and 25% total wall material. The emulsion was sonicated at 24 kHz for 120 s. The emulsion was then freeze-dried and the nanocapsules were incorporated into probiotic fermented milk, with the effects of nanocapsules examined on the milk. The results showed that the nanoparticles encapsulated with 25% gum arabic and 4% emulsifier had the highest encapsulation efficiency (EE) (87.17%) and the lowest surface oil (31.66 mg/100 kg). Using nanoencapsulated fish oil in fermented milk significantly (p<0.05) increased the viability of Lactobacillus plantarum as well as eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) contents. The fermented milk sample containing fish oil nanoencapsulated with 25% wall material and 4% emulsifier yielded the greatest probiotic bacterial count (8.41 Log CFU/mL) and the lowest peroxide value (0.57 mEq/kg). Moreover, this sample had the highest EPA and DHA contents. Utilizing this nanoencapsulated fish oil did not adversely affect fermented milk overall acceptance. Therefore, it can be used for fortification of low fat probiotic fermented milk.

• Journal of Ginseng Research
• /
• v.45 no.2
• /
• pp.236-245
• /
• 2021

Background: Red ginseng (RG) extract, especially ginsenoside Rg1 and Rb1 fractions has been reported to have antithrombotic activities. However, gastric instability and low intestinal permeability are considered to be obstacles to its oral administration. We hypothesized that stability, permeability, and activities of RG might be improved by encapsulation within nanoparticles (NPs) prepared with antithrombotic coating materials. Methods: RG-loaded chitosan (CS) NPs (PF-NPs) were prepared by complex ionic gelation with the antithrombotic wall materials, polyglutamic acid (PGA), and fucoidan (Fu). The concentrations of PGA (mg/mL, X₁) and Fu (mg/mL, X₂) were optimized for the smallest particle size by response surface methodology. Antithrombotic activities of RG and PF-NPs were analyzed using ex vivo and in vivo antiplatelet activities, in vivo carrageenan-induced mouse tail, and arteriovenous shunt rat thrombosis models. Results: In accordance with a quadratic regression model, the smallest PF-NPs (286 ± 36.6 nm) were fabricated at 0.628 mg/mL PGA and 0.081 mg/mL Fu. The inhibitory activities of RG on ex vivo and in vivo platelet aggregation and thrombosis in in vivo arteriovenous shunt significantly (p < 0.05) increased to approximately 66.82%, 35.42%, and 38.95%, respectively, by encapsulation within PF-NPs. For an in vivo carrageenan-induced mouse tail thrombosis model, though RG had a weaker inhibitory effect, PF-NPs reduced thrombus significantly due to the presence of PGA and Fu. Conclusion: PF-NPs contributed to improve the activities of RG not only by nanoencapsulation but also by antithrombotic coating materials. Therefore, PG-NPs can be suggested as an efficient delivery system for oral administration of RG.

• Preventive Nutrition and Food Science
• /
• v.21 no.1
• /
• pp.1-8
• /
• 2016

Increasing knowledge on the link between diet and human health has generated a lot of interest in the development of functional foods. However, several challenges, including discovering of beneficial compounds, establishing optimal intake levels, and developing adequate food delivering matrix and product formulations, need to be addressed. A number of new processes and materials derived from nanotechnology have the potential to provide new solutions in many of these fronts. Nanotechnology is concerned with the manipulation of materials at the atomic and molecular scales to create structures that are less than 100 nm in size in one dimension. By carefully choosing the molecular components, it seems possible to design particles with different surface properties. Several food-based nanodelivery vehicles, such as protein-polysaccharide coacervates, multiple emulsions, liposomes and cochleates have been developed on a laboratory scale, but there have been very limited applications in real food systems. There are also public concerns about potential negative effects of nanotechnology-based delivery systems on human health. This paper provides an overview of the new opportunities and challenges for nanotechnology-based systems in future functional food development.

• Journal of Dairy Science and Biotechnology
• /
• v.22 no.1
• /
• pp.1-12
• /
• 2004

Nanofood is advanced functional food which food industry and food scientist try to develop process foods in near future. To be developed nanofood, nanofood materials are needed, such as biodegradable nanosphere material, biotechnical nanofood material, and protein and nanofood material. There are some food industrial applications with nanotechnology, such as nanoencapsulation, nanomolecule making, nanoparticle and powder making, nano separation, and nano extration. We can find several nanofoods and nanofood materials on the market. In addition, dairy industry is also in the first step for the development of nanofunctional food. However, nanoencapsulations of lactase, iron, vitamin C, isoflavone are developed for functional milk. Dairy industry needs various nanofood materials to be advanced functional dairy products.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.146-146
• /
• 2003

If rare earth ions could be activated by electrical means after introducing into an appropriate semiconductor host, it might be possible to achieve the electrically-driven optical amplifier. Futhermore, some groups report that rare earth doped semiconductor nanoparticls show the sensitized emission. In this study, we try to prepare the Er/PbS nanoparticles encaupsulated by phenyl modified silica shell via sol-gel process. Er/PbS nanoparticles were characterized by UV-vis absorption, XRD, FT-IR and TEM etc. Finally we will present the luminescence properties of Er doped PbS nanoencapsulation.

• Proceedings of the SCSK Conference
• /
• 2003.09a
• /
• pp.568-569
• /
• 2003

Functional cosmetic ingredients such as L-ascorbic acid, retinoic acid, indole-3-acetic acid, salicylic acid, acidic dye(indigo carmine) are intercalatively encapsulated by skin-friendly metal hydroxides and oxides matrices. Such functional organic-inorganic nanohybrids are realized via chemical coprecipitation and surface coating reactions. The hetero-structural nature of these nanohybrids, their particle morphology and textural characterizations are mainly discussed on the basis of powder X-ray diffraction, electron microscopies, and high performance liquid chromatographic analyses. The cosmetic ingredients encapsulated in inorganics show greatly improved storage stability, sustained releasing property as well as higher transdermal transfer efficiency.

• Journal of Dairy Science and Biotechnology
• /
• v.23 no.1
• /
• pp.27-37
• /
• 2005

The development of functional foods started booming from several years ago in the world. The size of functional materials are in the range of micrometer level. This size can be much smaller into nanometer level to be more effective. We face some problems from the materials, such as flavor, taste, color, viscosity, etc. in functional materials. The problems can be solved by micro / nanoencapsulation technique. This paper showed some results of the research related on the technique for functional milks and dairy products. The nono / microcapsules are the form of liquid instead of solid. Coating materials used were fatty acid esters, and core materials were lactase, iron, ascorbic acid. isoflavone, and chitooligosaccharide. The ranges of capsules are from 100 nm to 200 ${\mu}$m. The sample milks added nano/microcapsules were homogeneous and prevented the defects of core materials. It was observed that nano / microcapsules in milk and dairy products were effective as functional material without defaults. It was indicated that targeted functional foods can be developed further in various foods by nanotechnology.