• 한국생산제조학회지
• /
• 제24권2호
• /
• pp.198-202
• /
• 2015

We present a series of simple but novel nanopatterning methodologies inspired by traditional mechanical machining processes involving rolling, pullout, and forging. First, we introduce roll-to-roll nanopatterning, which adapts conventional rolling for continuous nanopatterning. Then, nano-inscribing and nano-channel lithography are demonstrated, whereby seamless nanogratings can be continuously pulled out, as in a pullout process. Finally, we discuss vibrational indentation micro- and nanopatterning. Similarly to the forging/indentation process, this technique employs high-frequency vertical vibration to indent periodic micro/nanogratings onto a horizontally fed substrate. We discuss the basic principles of each process, along with its advantages, disadvantages, and potential applications. Adopting mature and reliable traditional technologies for small-scale machining may allow continuous nanopatterning techniques to cope with scalable and low-cost nanomanufacturing in a more productive and trustworthy way.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.509-509
• /
• 2011

Superhydrophobic surfaces on alloyed steels were fabricated with a non-conventional method of plasma etching and subsequent water immersion procedure. High aspect ratio nanopatterns of nanoflake or nano-needle were created on the steels with various Cr content in its composition. With CF4 plasma treatment in radio-frequence chemical vapor deposition (r.-f. CVD) method, steel surfaces were etched and fluorinated by CF4 plasma, which induced the nanopattern evolution through the water immersion process. It was found that fluorine ion played a role as a catalyst to form nanopatterns in water elucidated with XPS and TEM analysis. The hierarchical patterns in micro- and nano scale leads to superhydrophobic properties on the surfaces by deposition of a hydrophobic coating with a-C:H:Si:O film deposited with a gas precursor of hexamethlydisiloxane (HMDSO) with its lower surface energy of 24.2 mN/m, similar to that of curticular wax covering lotus surfaces. Since this method is based on plasma dry etching & coating, precise patterning of surface texturing would be potential on steel or metal surfaces. Patterned hydrophobic steel surfaces were demonstrated by mimicking the Robinia pseudoacacia or acacia leaf, on which water was collected from the humid air using a patterned hydrophobicity on the steels. It is expected that this facile, non-toxic and fast technique would accelerate the large-scale production of superhydrophobic engineering materials with industrial applications.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.92.1-92.1
• /
• 2013

Molecular electronics has been the subject of intese research for many years because of the fundamental interest in molecular charge transport and potential applications, such as (bio)nanosensors and molecular memory devices. Molecular electronics requires a method for making reliable eletrical contacts to singlemolecules. To date, several approaches have been reported: scanning-probe microscopy, mechanical break junctions, nano patterning, and direct deposition of electrode on a self-assembled monolayers. However, most methods are laborious and difficult for large-scale application and more importantly, cannot control the number of moleucles in the junction. Recently, DNA has been used as a template for metallic nanostructures (e.g., Ag, Pd, and Au nanowires) through DNA metallization process. Furthermore, oligodeoxynucleotides have been tethered to organic molecules by using conventional organic reactions. Collectively, these techniques should provide an efficient route toward reliable and reproducible molecular electronic devices with large-scale fabrication. Therefore, I will present a paradigm for the fabrication of moleuclar electronic devices by using micrometer-sized DNA-singe organic molecule and DNA triblock structures.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1206-1209
• /
• 2005

In recent, injection molding process for features in sub-micron scale is under active development as patterning nano-scale features, which can provide the master or stamp for molding, and becomes available around the world. Injection molding has been one of the most efficient processes for mass production of the plastic product, and this process is already applied to nano-technology products successfully such as optical storage media like DVD or BD which is a large area plastic thin substrate with nano-scale features on its surface. Bio chip for like DNA sequencing may be another application of this plastic substrate. The DNA can be sequenced using order of 100 nm pore structure when making the DNA flow through the pore structure. Agarose gel and silicon based chip have been used to sequence the DNA, but injection molded plastic chip may have benefit in terms of cost. This plastic DNA sequencing chip has plenty of pillars in order of 100 nm in diameter on the substrate. When the usual features in case of DVD or BD have very low aspect ratio, even less than 0.5, but the DNA chip will have relatively high aspect ratio of about 2. It is not easy to injection mold the large area thin substrate with sub-micron features on its surface due to the characteristics of the molding process and it becomes much more difficult when the aspect ratio of the features becomes high. We investigated the effect of the molding parameters for injection molding with high aspect ratio nano-scale features and injection molded some plastic DNA sequencing chips. We also fabricated PR masters and Ni stamps of the DNA chip to be used for molding

• 한국진공학회지
• /
• 제15권1호
• /
• pp.97-102
• /
• 2006

양극 산화된 알루미나 (anodized aluminum oxide : AAO)는 균일하고 일정한 크기의 나노기공 패턴을 지니고 있다. AAO를 이온빔 나노 patterning을 위한 이온조사 시 마스크로서 이용하기 위해 AAO 나노 기공을 통과하는 이온빔의 투과율(AAO에 입사한 이온에 대한 투과이온의 양의 비)을 측정하였다. Al bulk foil을 양극 산화하여 두께가 $4{\mu}m$이고 종횡비(두께와 기공의 지름의 비)가 각각 200:1, 100:1 인 AAO를 Goniometer에 부착하여 500 keV의 $O^{2+}$ 이온빔에 대해 나노기공을 정렬시킨 후, 기울임 각에 따른 투과율을 측정한 결과, 종횡비가 200:1, 100:1 일 때 투과율은 각각 약 $10^{-8},\;10^{-4}$로 거의 이온빔이 투과하지 못하였다. 반면에 $SiO_2$ 위에 증착된 Al 박막으로 양극산화하여 종횡비가 5:1인 AAO의 이온빔 투과율은 0.67로 투과율이 현저히 향상되었다. 높은 종횡비를 갖는 AAO의 경우에는 범과 AAO 기공의 정렬이 쉽지 않은데다 알루미나의 비전도성으로 인한 charge-up 현상으로 인해 이온빔이 극히 투과하기 어렵기 때문이다. 실제로 80 keV의 Co 음이온을 종횡비 5:1인 AAO에 조사시킨 후에는 AAO 나노기공과 동일한 크기의 나노 구조체가 형성됨을 주사전자현미경(scanning electron microscopy: SEM) 관찰을 통하여 확인하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.167-170
• /
• 2005

The two-dimensional (2D) and three-dimensional (3D) diamond-like carbon (DLC) stamps for ultraviolet nanoimprint lithography (UV-NIL) were fabricated using two kinds of methods, which were a DLC coating process followed by the focused ion beam (FIB) lithography and the two-photon polymerization (TPP) patterning followed by nano-scale thick DLC coating. We fabricated 70 nm deep lines with a width of 100 nm and 70 nm deep lines with a width of 150 nm on 100 nm thick DLC layers coated on quartz substrates using the FIB lithography. 200 nm wide lines, 3D rings with a diameter of $1.35\;{\mu}m$ and a height of $1.97\;{\mu}m$, and a 3D cone with a bottom diameter of $2.88\;{\mu}m$ and a height of $1.97\;{\mu}m$ were successfully fabricated using the TPP patterning and DLC coating process. The wafers were successfully printed on an UV-NIL using the DLC stamp. We could see the excellent correlation between the dimensions of features of stamp and the corresponding imprinted features.

• KSBB Journal
• /
• 제22권6호
• /
• pp.433-437
• /
• 2007

본 연구에서는 나노임프린트 리소그래피를 이용하여 500 nm line, 600 nm pore, $1{\mu}m$ pore, $2.5{\mu}m$ pore의 마이크로 수준에서 나노 수준에 이르는 다양한 크기와 모양의 nanopore 형태 패턴을 제작하였다. Thermal imprint 방식과 달리 상온, 저압에서 임프린팅이 가능하며 사용되는 스탬프의 수명을 늘리고 보다 미세하고 복잡한 형태의 패턴을 제작할 수 있는 UV-assisted imprint 방식을 사용하였다. E-beam lithography로 패턴을 각인한 quartz소재의 스탬프를 사용하였으며 스탬프의 재질이 투명하여 UV 조사시 UV curable resin이 경화될 수 있도록 하였다. 또한 스탬프의 표면을 (heptadecafluoro-1,1,2,2-tetrahydrodecyl) trichlorosilane의 monolayer 층으로 미리 코팅하여 임프린트 후 스탬프와 기판과의 releasing을 쉽게함과 동시에 패턴의 일부가 스탬프에 묻어 나와 전사된 패턴에 defect가 없도록 하였다. 또한, gold를 미리 증착하여 임프린팅함으로써 lift-off 시에 필요한 hi-layer 층이 필요 없게 되어 산소 플라즈마를 이용한 에칭이 더욱 쉽고 lift-off 공정이 생략될 수 있도록 하였다. 나노임프린트 공정에 있어 가장 큰 문제점은 잔여층의 생성이며 이러한 잔여층을 제거하고자 산소 플라즈마 에칭을 하였다. 에칭공정을 통해 gold의 표면이 완전히 드러났으며 산소 플라즈마를 통해 gold의 표면이 친수성으로 바뀌어 추후 단백질 고정화를 더욱 쉽게 하였다. 그리하여 나노임프린트 기술을 이용해 나노크기의 바이오소자 제작을 가능하게 하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1917-1921
• /
• 2008

Ultraviolet-nanoimprint lithography (UV-NIL) is promising technology for cost effectively defining micro/nano scale structure at room temperature and low pressure. In addition, this technology is fascinating because of it's possibility for high-throughput patterning without complex processes. However, to acquire good micro/nano patterns using this technology, there are some challenges such as uniformity and fidelity of patterns, etc. In this paper, we have focused on uniform contact mechanism and performed contact mechanics analysis. The dimension of the flexible sheet to get adequate uniform contact area has been obtained from contact mechanics simulation. Based on this analysis, we have made a uniform pressurizing device and confirmed its uniform pressurized zone using a pressure sensing paper.

• 한국전기전자재료학회논문지
• /
• 제19권3호
• /
• pp.267-272
• /
• 2006

Optical waveguide based on symmetric and asymmetric Mach-Zehnder interferometer(MZI) type was designed, fabricated and measured the optical characteristics for the application of biosensor. The wavelength of the input optical signal for the device was 1550 nm. And the difference of refractive index was $0.45\;{\Delta}\%$ between core and cladding of the device. The TM(Transverse Magnetic) mode optical properties of the biosensor were analyzed with the refractive index variation of gold thin film deposited for overclad. Nowadays, nano-photonic crystal structures have been paied much attention for its high optical sensitivity. There is a technique to realize the structure, which is called Dip-Pen Nanolithography(DPN) process. The process requires a nano-scale process patterning resolution and high reliability. In this paper, two dimensional nano-photonic crystal array on the surface was proposed for improving the sensitivity of optical biosensor. And the Dip-Pen Nanolithogrphy process was investigated to realize it.

• Macromolecular Research
• /
• 제13권5호
• /
• pp.435-440
• /
• 2005

This study describes a method where the match of two different length scales, i.e., the patterns from self-assembled block copolymer (<50 nm) and electron beam writing (>50 nm), allow the nanometer scale pattern mask. The method is based on using block copolymers containing a poly(methyl methacrylate) (PMMA) block, which is subject to be decomposed under an electron beam, as a pattern resist for electron beam lithography. Electron beam on self assembled block copolymer thin film selectively etches PMMA microdomains, giving rise to a polymeric nano-pattern mask on which subsequent evaporation of chromium produces the arrays of Cr nanoparticles followed by lifting off the mask. Furthermore, electron beam lithography was performed on the micropatterned block copolymer film fabricated by micro-imprinting, leading to a hierarchical self assembled pattern where a broad range of length scales was effectively assembled, ranging from several tens of nanometers, through submicrons, to a few microns.