• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.157-159
• /
• 2005

본 연구에서는 저온 액상반응법을 이용하여 활성제 Eu의 농도를 10wt%로 도핑하고 열처리를 각각 450, 700, $900^{\circ}C$로 1h 유지하여 $Gd_2O_3:Eu^{3+}$ 나노형광체를 합성하였다. 제조된 형광체의 결정화, 입자크기를 XRD, BET로 분석하였고, 이들이 발광 휘도에 미치는 영향을 확인하였다. 또한 합성된 형광체의 PL(photoluminescence) 특성을 알아보기 위해 여기파장 254nm 의한 발광스펙트럼, 611nm에 의한 여기스펙트럼을 조사하였다. 발광 특성은 611nm에서 주 peak을 갖는 $Eu^{3+}$ 이온에 의한 $^5D_0-^7F_{J(J=0,1,2)}$ 전이에 기인된 전형적인 Red 형광체의 특성을 나타냈고, 입자크기는 평균 20-60nm 정도이고, 발광강도는 열처리 온도가 증가함에 따라 향상되었다.

• 한국광학회지
• /
• 제35권3호
• /
• pp.95-106
• /
• 2024

일반 백색 LED의 연색성을 보완하기 위해 적색 양자점을 선택적으로 활용함으로써 고연색성 조명을 구현하는 연구가 최근 활발하다. 본 논문에서는 최근 이루어지고 있는 원격 양자점 부품 연구 및 이를 활용한 고연색성 조명 개발의 현황에 대해 소개한다. 특히 양자점 부품이 배치되는 조명의 광구조 최적화에 있어서 중요하게 고려해야 할 다양한 요소를 집중적으로 논의함으로써 향후 고연색성 조명 연구의 방향 및 전망까지 다루고자 했다.

• 한국결정성장학회지
• /
• 제27권1호
• /
• pp.18-21
• /
• 2017

본 연구에서는 homogeneous precipitation method를 통하여 구형의 단분산(monodispersed) YAG : $Ce^{3+}$를 합성했다. 단분산 YAG : $Ce^{3+}$의 전구체를 합성하는 과정에서 aluminum ion들이 먼저 석출되어 aluminum 화합물을 형성하고 후에 yttrium 화합물들이 aluminum 화합물들의 표면에서 석출된다. 합성된 전구체를 파우더형태로 얻기 위해 건조과정을 거치는데, oven에서 건조했을 때 보다 동결건조기에서 건조했을 때 비교적 구형의 단분산 YAG : $Ce^{3+}$ 입자를 얻을 수 있었다. 하소 과정에서 공정을 진행하는 온도로서 $1100^{\circ}C$와 $1200^{\circ}C$를 비교해 보았다. 실험 결과 $1200^{\circ}C$의 온도로 상압에서 6시간 동안의 하소 과정을 진행하였을 때 400~500 nm 입자크기를 가진 단분산된 구형의 나노 YAG : $Ce^{3+}$ 입자가 합성되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.86-86
• /
• 2012

The new approaches for silicon solar cell of new concept have been actively conducted. Especially, solar cells with wire array structured radial p-n junctions has attracted considerable attention due to the unique advantages of orthogonalizing the direction of light absorption and charge separation while allowing for improved light scattering and trapping. One-dimenstional semiconductor nano/micro structures should be fabricated for radial p-n junction solar cell. Most of silicon wire and/or pillar arrays have been fabricated by vapour-liquid-solid (VLS) growth because of its simple and cheap process. In the case of the VLS method has some weak points, that is, the incorporation of heavy metal catalysts into the growing silicon wire, the high temperature procedure. We have tried new approaches; one is electrochemical etching, the other is noble metal catalytic etching method to overcome those problems. In this talk, the silicon pillar formation will be characterized by investigating the parameters of the electrochemical etching process such as HF concentration ratio of electrolyte, current density, back contact material, temperature of the solution, and large pre-pattern size and pitch. In the noble metal catalytic etching processes, the effect of solution composition and thickness of metal catalyst on the etching rate and morphologies of silicon was investigated. Finally, radial p-n junction wire arrays were fabricated by spin on doping (phosphor), starting from chemical etched p-Si wire arrays. In/Ga eutectic metal was used for contact metal. The energy conversion efficiency of radial p-n junction solar cell is discussed.

• 한국분말재료학회지
• /
• 제12권4호
• /
• pp.279-283
• /
• 2005

In this study, the ZnS composite powders for host material in phosphor was synthesized in situ by mechanical alloying. As the mechanical alloying time increases, particle size of ZnS decreases. ZnS powders of $1.85\;\mu{m}$ in a mean size was fabricated by mechanical alloying for 10h. The crystal structures of ZnS powders were investigated by X-ray diffraction and the photo-luminescence properties was evaluated with the optical spectra analyzer. The steady state condition of mechanically alloyed ZnS was obtained as a mean particle size of $2\;\mu{m}$ in 5h milling. The sphalerite and wurtize structures coexist in the ZnS mechanically alloyed for 5h. The ZnS powder mechanically alloyed for 10h grows to the sphalerite structure. And the strong emission peaks of ZnS are observed at 480 nm wave length at the powders of mechanically alloyed for 10h, but the sphalerite and wurtize structures in ZnS coexist and emission peaks are not appeared at the powders of mechanically alloyed for 10h.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.184-184
• /
• 2012

Recently, InGaN/GaN multi-quantum well grown on GaN pyramid structures have attracted much attention due to their hybrid characteristics of quantum well, quantum wire, and quantum dot. This gives us broad band emission which will be useful for phosphor-free white light emitting diode. On the other hand, by using quantum dot emission on top of the pyramid, site selective single photon source could be realized. However, these structures still have several limitations for the single photon source. For instance, the quantum efficiency of quantum dot emission should be improved further. As detection systems have limited numerical aperture, collection efficiency is also important issue. It has been known that micro-cavities can be utilized to modify the radiative decay rate and to control the radiation pattern of quantum dot. Researchers have also been interested in nano-cavities using localized surface plasmon. Although the plasmonic cavities have small quality factor due to high loss of metal, it could have small mode volume because plasmonic wavelength is much smaller than the wavelength in the dielectric cavities. In this work, we used localized surface plasmon to improve efficiency of InGaN qunatum dot as a single photon emitter. We could easily get the localized surface plasmon mode after deposit the metal thin film because lnGaN/GaN multi quantum well has the pyramidal geometry. With numerical simulation (i.e., Finite Difference Time Domain method), we observed highly enhanced decay rate and modified radiation pattern. To confirm these localized surface plasmon effect experimentally, we deposited metal thin films on InGaN/GaN pyramid structures using e-beam deposition. Then, photoluminescence and time-resolved photoluminescence were carried out to measure the improvement of radiative decay rate (Purcell factor). By carrying out cathodoluminescence (CL) experiments, spatial-resolved CL images could also be obtained. As we mentioned before, collection efficiency is also important issue to make an efficient single photon emitter. To confirm the radiation pattern of quantum dot, Fourier optics system was used to capture the angular property of emission. We believe that highly focused localized surface plasmon around site-selective InGaN quantum dot could be a feasible single photon emitter.

• 새물리
• /
• 제68권11호
• /
• pp.1196-1202
• /
• 2018

고상 반응법을 이용하여 처음으로 $Li_2SrSiO_{4-{\alpha}}N_{\alpha}:Eu^{2+}$ 형광체를 제조하고, 제조된 시료들에 대한 결정성 및 광학적 특성을 비교, 분석하였다. 제조된 시료들은 모두 230~530 nm의 넓은 영역에서 효율적인 여기 특성을 보이고 있다. 본 연구에 사용된 시료들 모두 568 nm에서 최대 발광 세기를 보이는데 이는 현재 상용 중인 $YAG:Ce^{3+}$에 비하여 최대 발광 세기가 약 18 nm 장파장 영역으로 이동함을 의미한다. 따라서 450 nm의 빛을 발하는 청색 LED와 결합하면, $YAG:Ce^{3+}$를 사용하여 상용화된 기존의 백색광보다 보다 따듯한 느낌의 백색광원용 형광체로 활용될 수 있으리라 판단한다. 또한 질소의 원료 물질로 사용된 $Si_3N_4$의 분말크기가 마이크론인 경우에 광활성 이온인 $Eu^{2+}$가 첨가되지 않아도 모체발광이 일어난다는 것을 처음으로 알게 되었다.