• 한국건축시공학회지
• /
• 제20권5호
• /
• pp.425-432
• /
• 2020

전통한식 점토기와는 외관이 미려하고, 내수성 및 내화성, 내구성이 우수하나 높은 소성온도를 요구하여 경제성과 중량문제 등으로 인하여 전통양식의 기와를 사용하기 보다 기존의 공법을 사용하고 있는 것이 현 추세이다. 이에 본 연구에서는 우리나라의 산청에서 생산되는 고령토와 점토의 기와 소재에 나노알루미나실리케이트를 첨가하여 1,000℃ 이하의 저온소성하면서 전통한식 점토기와로서의 요구되는 물성을 만족하는 최적배합과 재료의 공정을 설계하고 이를 통해 나노코팅 전통한식 점토기와 소재개발에 관한 특성은 연구하고자 한다.

• Advances in nano research
• /
• 제4권3호
• /
• pp.181-195
• /
• 2016

Addition of nano-$SiO_2$ (NS) to geopolymer composites has been studied through measurement of compressive strengths, FTIR and XRD analysis. Alumino-silicate materials are coarse aggregate included waste concrete and demolished walls with its cementing binder, cement kiln dust (CKD) used and can possess a pronouncing activation for the geopolymer reaction resulting from the high alkali contents within. Materials prepared at water/binder ratios in a range of 0.30: 0.40 under curing of $40^{\circ}C$ and 100% Relative Humidity (R.H.), while the used activator is sodium hydroxide in the ratio of 2 wt. %. First, CKD is added in the ratio from 10 up to 50 wt., %, and the demolished walls was varied depending on the used CKD content, while using constant ratio of waste concrete (40 wt., %). Second step, depending on the optimum CKD ratio resulted from the first one (40 wt. %), so the control geopolymer mix composed of cement kiln dust, demolished walls and waste concrete in the ratio (40:20:40, wt %). Nano-silica partially replaced waste concrete by 1 up to 8%. Results indicated that, compressive strengths of geopolymer mixes incorporating nano-silica were obviously higher than those control one, especially at early ages and specially with 3%NS.

• 한국결정성장학회지
• /
• 제19권2호
• /
• pp.84-89
• /
• 2009

The turbid/translucent, near colorless(milky) metamorphic sapphire samples from Sri Lanka have been characterized after the heat treatment in $N_2$ at $1650^{\circ}C$. As-received sapphire specimens became bluish-colored and exhibited more clarity after the heat treatment. It was found that the color change at inclusions zoning region is attributed by the dissolution. As received samples contain the micro/nano inclusions such as rutile($TiO_2$), ilmenite($FeTiO_3$), spinel($MgAl_{2}O_{4}$)/ulvospinel($Fe_{2}TiO_{4}$) and apatite($Ca_5(PO_4)_3$), which were dissolved by the heat treatment and form the blue color through $Fe^{2+}/Ti^{4+}$ charge transferring. The microstructures become different because as the dissolution of apatite($Ca_5(PO_4)_3(OH,F,Cl)$) in alumino silicates($Al_{2}SiO_{5}$) occurred, resulting in morphological change with the appearance of(Ca, Mg, Al) silicate on the surface. Both as-received and heat treated samples showed the rhombohedral crystal structure of $Al_{2}O_{3}$.