• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.6
• /
• pp.229-233
• /
• 2005

Novel process was tried to obtain micro-porous ceramic body containing continuous pore channel. $MgAl_2O_4/MgO$ eutectic fibers and rods have been grown successfully by the micro-pulling-down method, and the microstructures and optical characterizations of grown crystals were performed. $MgAl_2O_4/MgO$ eutectic fibers of $0.3{\sim}1mm$ in diameter and about 500 mm in length, and the rods having 5 mm in diameter with approximately 60 mm in length have been grown with the $6{\sim}120mm/hr$ of growth speed. The eutectic fibers showed homogeneous microstructure in which MgO fiber aligned to the growth direction in the $MgAl_2O_4$ (spinel) matrix. The grown crystals looked semitransparency under naked eyes. Optical and orientational characterizations were performed. The second phase of MgO (periclase) was easily removed by selective etching with hydrochloric acid, and then porous bodies were obtained.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.2
• /
• pp.51-56
• /
• 2012

The butterfly valve has been used over all industries. It has been studied to improve its performance through the theoretical analysis and the test in industry. Though products adopted those improvements have been sold in markets, manufacturers often launch products without the life test. One reason is because of the long development period and financial difficulties. The other is the lack of the design and fabrication experiences on building the life test equipment. Thus, this study has been researched for the design and fabrication of our life test equipment, and developed and improved the equipment to check the leakage of the valve with the naked eyes during the test.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.57-60
• /
• 2001

In order to extend the life time of building and civil infra-structure, nowadays, patch type fibrous composite materials are widely used. Retrofitted concrete columns and beams gain the stiffness and strength, but they lose toughness and show brittle failure. Usually, the cracks of concrete structures are visible with naked eyes and the status of the structure in the life cycle is estimated with visible inspection. After retrofitting of the structure, crack visibility is blocked by retrofitted composite materials. Therefore, structural monitoring after retrofitting is indispensible and self diagnosis method with optical fiber sensor is very useful. In this paper, We try to detect peel out effect and find the strain difference between main structure and retrofitting patch material when they separate each other.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.2
• /
• pp.131-139
• /
• 2008

This paper presents a new saliency map which is constructed by providing dynamic weights on individual features in an input image to search ROI(Region Of Interest) or FOA(Focus Of Attention). To construct a saliency map on there is no a priori information, three feature-maps are constructed first which emphasize orientation, color, and intensity of individual pixels, respectively. From feature-maps, conspicuity maps are generated by using the It's algorithm and their information quantities are measured in terms of entropy. Final saliency map is constructed by summing the conspicuity maps weighted with their individual entropies. The prominency of the proposed algorithm has been proved by showing that the ROIs detected by the proposed algorithm in ten different images are similar with those selected by one-hundred person's naked eyes.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.12 no.20
• /
• pp.33-38
• /
• 1989

In order to achieve the most suitable designing of shoemaking, the structure of shoemaking is described in this study by inquiring into structural and functional effects given by shoes to human feet. Also, the role of insole that is an essential portion in view of function in shoemaking is described and. for the improvement of quality the fact that selection of material of insole has an effect to quality is substantiated through experiments of adhesive tensile and absorption percentage. Though identification of the qualify of insole with the naked eyes is impossible because it is inserted between the internal layers of a shoe. It is not only an essential portion for the improvement of the quality of shoemaking but it gives an essential effect to the sanitation and health of human body(feet) when insole of lower qualify is used. In view of these the improvement and enhancement of the quality of home-made material of insole are earnestly required.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.149-152
• /
• 2005

In order to extend the life time of building and civil infra-structure, nowadays, patch type carbon sheets are widely used as repairing meterials. Repaired concrete columns and beams with carbon sheets gain their stiffness and strength, but they lose toughness and show brittle failure behaviors. Usually, the cracks of concrete structures are visible with naked eyes and the status of the structure in the life cycle is estimated with visible inspection. After repairing of the structure, crack visibility is blocked by repaired carbon sheets. Therefore, structural monitoring after repairing is indispensible and self diagnosis method with optical fiber sensor is very useful. In this paper, peel-out effects is detected with optical fiber sensors and the strain difference between main structure and repaired carbon sheets when they separate each other.

• Laser Solutions
• /
• v.2 no.3
• /
• pp.19-31
• /
• 1999

This paper introduces the monitoring scheme of laser welding quality using neural network. The developed monitoring scheme detects light signal emitting from plasma formed above the weld pool with optic sensor and DSP-based signal processor, and analyzes to give a guidance about the weld quality. It can automatically detect defects of laser weld and further give an information about what kind of defects it is, specially partial penetration and porosity among the interior defects. Those could be detected only by naked eyes or X-ray after welding, which needs more processes and costs in mass production. The monitoring scheme extracts four feature vectors from signal processing results of optical measuring data. In order to classify pattern for extracted feature vectors and to decide defects, it uses single-layer neural network with perceptron learning. The monitoring result using only the first feature vector shows confidence rate in recognition of 90%($\pm$5) and decides whether normal status or defects status in real time.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.66-67
• /
• 2008

Most mineral resources are located in subsurface but mineral exploration starts with a step of investigation in wide-area to find evidence of buried ores. Conventional technique for exploration on wide-area as a preliminary survey is an observation using naked eyes by geologist or chemical analysis using lots of samples obtained from target area. Hyperspectral remote sensing can overcome those subjective and time consuming survey and can produce mineral resources distribution map. Precise resource map requires information of mineral distribution in a subpixellevel because mineral is distributed as rock components or narrow veins. But most hyperspectral data is composed of pixels of several meters or more than ten meters scale. We reviewed subpixel unmixing algorithms which have been used for geological field and tested detection ability with Hyperion imagery, geological map and seven spectral curves of mineral and rock specimens which were obtained from study areas.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.1
• /
• pp.66-72
• /
• 2004

To assess tunnel safety, cracks in tunnel lining are measured by inspectors, who observe cracks with their naked eyes and record them. But manual inspection is slow, and measured crack data is subjective. Therefore, this study proposes inspection system fur measuring cracks in tunnel lining and providing objective crack data to be used in safety assessment. The system consists of On-vehicle system and Laboratory system. On-Vehicle system acquires image data with line CCD camera on scanning along the tunnel lining. Laboratory system extracts crack information from the acquired image using image processing. Measured crack information is crack thickness, length and orientation. To improve accuracy of crack recognition, the geometric properties and patterns of cracks in concrete structure were applied to image processing. The proposed system was verified with experiments in both laboratory environment and field environment such as subway tunnel.

• BMB Reports
• /
• v.38 no.4
• /
• pp.399-406
• /
• 2005

A sensitive method for detection of Hepatitis A virus (HAV) by utilizing gold-DNA probe on an array was developed. Amino- modified oligodeoxynucleotides at the 5' position were arrayed on an activated glass surface to function as capture probes. Sandwich hybridization occurred among capture probes, the HAV amplicon, and gold nanoparticle-supported oligonucleotide probes. After a silver enhancement step, signals were detected by a standard flatbed scanner or just by naked eyes. As little as 100 fM of HAV amplicon could be detected on the array. Therefore, the array technology is an alternative to be applied in detection of HAV due to its low-cost and high-sensitivity.