• Journal of Ginseng Research
• /
• v.24 no.4
• /
• pp.168-175
• /
• 2000

Relatively little is known about the signaling mechanism of ginseng saponins (ginsenosides), active ingredients of ginseng, in non-neuronal cells. Here, we describe that ginsenosides utilize a common pathway of receptor-mediated signaling pathway in Xenopus oocytes: increase in intracellular $Ca^{2+}$ concentration via phospholipase C (PLC) and $Ca^{2+}$ mobilization. Ginsenosides induced a marked and robust artivation of $Ca^{2+}$-activated Cl- channels in Xenopus oocytes. The effect of ginsenosides was completely reversible, in a dose-dependent manner with EC$_{50}$ of 4.4 $\mu\textrm{g}$/mi, and specifically blocked by niflumic acid, an inhibitor of $Ca^{2+}$-activated Cl- channel. Intracellular injection of BAPIA abolished the effect of ginsenosides. Intracellular injection of GTP${\gamma}$S also abolished the effect of ginsenosides. The effect of gin senosides on $Ca^{2+}$-activated Cl- currents was greatly reduced by the intracellular injection of heparin, an IP$_3$ receptorantagonist or the pretreatment of PLC inhibitor. These results indicate that ginsenosides activate endogenous $Ca^{2+}$-activated Cl- channels via the activation of PLC and the release of $Ca^{2+}$ from the IP$_3$-sensitive intracellular store following the initial interaction with membrane component(s) from extracellular side. This signaling pathway of ginsenosides may be one of the action mechanisms for the pharmacological effects of ginseng.ts of ginseng.

• Elastomers and Composites
• /
• v.36 no.2
• /
• pp.111-120
• /
• 2001

Mechanical properties and their adhesion behavior with zinc- and brass-plated steel cords of natural rubber/acrylonitrile-butadiene blend compounds were investigated as a function of blend ratio. The Mooney viscosity and stress relaxation time were found to be lowered with increasing NBR content. Tensile modulus generally increased with increasing NBR content. Tensile stress at break stayed constant up to about 40 phr and showed minimum at $50{\sim}60 phr$, and thereafter increased with increasing NBR content. Strain at break decreased linearly below 50 phr, and above the level it showed nearly constant value. Based on the abrupt drops in elastic modulus and tan ${\delta}$ peak, the glass transition temperature of NR and NBR were found to be -55 and $-10^{\circ}C$, respectively. In the case of NR/NBR blend compounds, two distinct transition points were observed and each transition position was not affected by NBR level indicating an incompatible nature of NR/NBR blend system. The pullout force and rubber coverage decreased to the level of about 40% to that of pure m compound, when the 50 phr of NR was replaced by NBR. However, the pure NBR compound showed the comparable adhesion performance with NR(${\sim}90%$). The sulfur concentration was found to become lower with the increased NBR content at the adhesion interface based on the Auger spectrometer results, representing a lack of adhesion layer formation, and this was explained for a possible cause of low adhesion performance with adding NBR.

• Elastomers and Composites
• /
• v.39 no.1
• /
• pp.12-22
• /
• 2004

The plasma surface modification of natural rubber vulcanizate was carried out using chlorodifluoromethane in a radio-frequency (13.56 MHz) electrodeless bell type plasma reactor. The modification was qualitatively assessed by Fourier transform infrared spectroscopy. The frictional force of the plasma-treated surface was found to decrease with the time of plasma treatment. An increase in the surface polarity, as evidenced by the decrease in contact angle of a sessile drop of water and ethylene glycol on the natural rubber vulcanizate surface, was noted with the plasma modification. In the case of similar plasma treatment of glass surface, only a reduction in the polarity was observed. The use of geometric and harmonic mean methods was found to be useful to evaluate the London dispersive and specific components of surface free energy. Irrespective of the method used for evaluation, an increasing trend in the surface free energy was noted with increasing plasma treatment time. However, the harmonic mean method yielded comparatively higher values of surface free energy than the geometric mean method. The plasma surface modification was found to vary the frictional coefficient by influencing the interfacial, hysteresis and viscous components of friction in opposing dual manners.

• Polymer(Korea)
• /
• v.32 no.3
• /
• pp.263-269
• /
• 2008

To develop carriers of hydrophobic anticancer agents based on chitosan, chitosan oligosaccharide lactate (COS) was chemically modified with lithocholic acid (LA) which is one of the bile acids as a hydrophobic group. The physicochemical properties of the lithocholic acid conjugated chitosan nanoparticles (COS-LA) were investigated using $^1H$-NMR spectroscopy, dynamic light scattering (DLS) and spectrofluorophotometer. COS-LA-paclitaxel (CLs-Tx) nanoparticles loading paclitaxel as an anticancer agent were prepared by a dialysis method and its loading efficiency was measured through HPLC. On the basis of DLS results, the estimated particle sizes of CLs-Tx were around 300 nm. Also, the critical micelle concentration (CMC) was proven to be dependent on the degree of substitution of lithocholic acid. It showed that the CLs-Tx has the superior potential for the application as a paclitaxel carrier.

• Korean Journal of Optics and Photonics
• /
• v.22 no.6
• /
• pp.262-268
• /
• 2011

MIRIS(Multi-purpose Infra-Red Imaging System) is the main payload of the STSAT-3(Korea Science and Technology Satellite. 3), which is being developed by KASI(Korea Astronomy & Space Institute). EOC(Earth Observation Camera), which is one of two infrared cameras in MIRIS, is the camera for observing infrared rays from the Earth in the range of $3{\sim}5{\mu}m$. The optical system of the EOC is a Cassegrain prescription with aspheric primary and secondary mirrors, and its aperture is 100mm. A ring type flexure supports the EOC primary mirror with pre-loading in order to withstand expected load due to the shock and vibration from the launcher. Here we attempt to use the same mechanism by which a retainer supports the lens. Through opto-mechanical analysis it was confirmed that the EOC primary mirror is effectively supported.

• Journal of Nutrition and Health
• /
• v.54 no.5
• /
• pp.489-500
• /
• 2021

Purpose: This study aimed at investigating the nutritional status, nutritional support, and nutritional indicators of critically ill patients on extracorporeal membrane oxygen (ECMO) in intensive care units (ICU). Methods: This descriptive study obtained data from the medical records of 37 patients who were treated using ECMO at a university hospital in Korea. The patients were admitted to the Korea University Anam Hospital ICU with acute or serious damage to vital organs from January 1, 2014 to June 30, 2016. Results: Although 32 patients (86.5%) were at a high risk of malnutrition, 26 patients (70.3%) were considered normal in terms of nutritional status by the nutritionist at the beginning of their ICU stay. However, after two weeks, nine patients had passed away and only one patient maintained normal status. Parenteral nutrition was started first but took 4.25 ± 6.95 days till initiation. Only eight patients (21.6%) were able to meet their requirement for both calories and protein. The group provided with adequate calorie and protein showed significantly longer use of the ECMO and respirator and longer ICU and total hospital stay than their counterparts. Normal levels of serum albumin and protein of the group at low-risk for malnutrition on the day of initiation of ECMO, which were significantly higher than the high-risk group, declined by the last day of ECMO leading to a lack of significant differences between the two groups. Conclusion: Considering that the nutritional indicators of patients deteriorated as the days on ECMO increased, more aggressive nutritional management to ensure adequate nutritional support should be emphasized from the beginning and throughout the ICU stay.

• Journal of the Society of Disaster Information
• /
• v.18 no.3
• /
• pp.622-635
• /
• 2022

Purpose: Due to the change of demography, the ratio of senior drivers has increased and the transition to a super-aged society is expected to make more seniors drive in the future. Method: In this research, we analyzed medical characteristics of the driver's age-specific decline in body function and saw that both the function of the physical as well as mental capacities deteriorates as people age. Among them, various functions are precipitously weakened after reaching 70, implying that those over the age of 70 are classified as seniors in a medical sense. In this context, we also could identify that based on such age criteria, various safety policies for senior drivers should be developed and set up in Korea. Result: We could find a steep fall in the physical function of body after reaching 70 from the chronological change of cognitive function and judgment ability. In particular, it is revealed that the driving license institution and aptitude test for drivers over 70 should be thoroughly examined, as physical functions necessary for driving such as eyesight and hearing ability is not strong enough in many drivers over 70. Conclusion: Focusing on the physical capacity to drive, we tried to find the hazardous age bracket of senior drivers which might influence driving behaviors. Going forward, we expect this work would help to understand the policies for senior drivers and drivers' physical differences.

• Food Science and Biotechnology
• /
• v.14 no.4
• /
• pp.474-478
• /
• 2005

Because it possesses anti-inflammatory, antifungal, antiviral, and tissue regenerative properties, propolis has been used for thousands of years in folk medicine for multiple purposes. Although the antimicrobial activity of propolis has already been demonstrated, very few studies have been conducted on bacteria of clinical relevance in dentistry. The aim of this study is to evaluate the antimicrobial, anti-inflammatory, and anti-oxidative activities of 0.1% and 1.0% propolis, both of water-extracted (proAQ) and ethanol-extracted (proAL) propolis, for industrial applications. In studies of antimicrobial activity, the growth of Staphylococcus aureus ATCC 35556, Salmonella enteritidis ATCC 12021, Escherichia coli O157:H7, and Candida parapsilosis KCCM 35428, all general food or clinical pathogens, were tested. The culture medium used was trypticase soy broth including 0.6% yeast extract; after 6 hr of incubation, the turbidities were measured at 620 nm with a spectrophotometer. The results indicate that the antimicrobial effects of both 1.0% proAQ and 1.0% proAL were greater against the growth of S. aureus ATCC 35556 and C. parapsilosis KCCM 35428 rather than those of S. enteritidis ATCC 12021 and E. coli O157:H7. Additionally, it appears that the anti-inflammatory effects of proAL are greater than those of proAQ. The anti-inflammatory effects were evaluated by measurement of the inhibition of hyaluronidase activity in vitro. At a 1% concentration, the anti-inflammatory effects of proAL were greater than those of proAQ. Finally, the anti-oxidative effects of 1% and 10% solutions of each extract sample were measured according to the TBA method at $40^{\circ}C$ for 1, 2, 3, and 5 days and were compared with 1.0% BHT. The results indicate that the anti-oxidative effects at 0.1% for both proAQ and proAL were not significantly different than the anti-oxidative effects at 1.0% BHT (p<0.05). Thus, it appeared that the alcohol-extracted propolis had greater antimicrobial, anti-inflammatory, and anti-oxidative effects than the water-extracted propolis. This is based on the presumption that major biofunctional components were fat-soluble, rather than water-soluble.

• Journal of Ginseng Research
• /
• v.37 no.3
• /
• pp.324-331
• /
• 2013

Channels formed by the co-assembly of the KCNQ1 subunit and the mink (KCNE1) subunit underline the slowly activating delayed rectifier $K^+$ channels ($I_{Ks}$) in the heart. This $K^+$ channel is one of the main pharmacological targets for the development of drugs against cardiovascular disease. Panax ginseng has been shown to exhibit beneficial cardiovascular effects. In a previous study, we showed that ginsenoside Rg3 activates human KCNQ1 $K^+$ channel currents through interactions with the K318 and V319 residues. However, little is known about the effects of ginsenoside metabolites on KCNQ1 $K^+$ alone or the KCNQ1 + KCNE1 $K^+$ ($I_{Ks}$) channels. In the present study, we examined the effect of protopanaxatriol (PPT) and compound K (CK) on KCNQ1 $K^+$ and $I_{Ks}$ channel activity expressed in Xenopus oocytes. PPT more strongly inhibited the $I_{Ks}$ channel currents than the currents of KCNQ1 $K^+$ alone in concentration- and voltage-dependent manners. The $IC_{50}$ values on $I_{Ks}$ and KCNQ1 alone currents for PPT were $5.18{\pm}0.13$ and $10.04{\pm}0.17{\mu}M$, respectively. PPT caused a leftward shift in the activation curve of $I_{Ks}$ channel activity, but minimally affected KCNQ1 alone. CK exhibited slight inhibition on $I_{Ks}$ and KCNQ1 alone $K^+$ channel currents. These results indicate that ginsenoside metabolites show limited effects on $I_{Ks}$ channel activity, depending on the structure of the ginsenoside metabolites.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.2
• /
• pp.135-147
• /
• 2015

With the miniaturization and digitalization of electronics industry, demand for Multi-Layer Ceramic Capacitor(MLCC) has increased steadily because of its various applications such as DC Blocking, Decoupling and Filtering etc. The modeling techniques of MLCC has been studied for a long time but most of these modeling method can only be applied after measurement and this has some losses of material, time in both production stage and measurement stage. This paper proposes the modeling method which can predict the frequency characteristics of MLCC from structure data and material data in design stage. The impedance of N-Layer Capacitor can be expressed in differential mathematical form based on coupled transmission line equations. By using this formula, we can predict the impedance of MLCC. As a result, proposed modeling is correspond with simulation, and it takes much less time to obtain the result than the simulation.