• Journal of the Korean Wood Science and Technology
• /
• v.37 no.2
• /
• pp.171-176
• /
• 2009

The chemical constituents of Acer komarovii Pojark. which belongs to Aceraceae has never been reported. The bark of A. komarovii was extracted with 70% aqueous acetone, and the concentrated extract was successively partitioned with n-hexane, dichloromethane, ethyl acetate and $H_2O$. From the ethyl acetate soluble fraction, four compounds were isolated by the repeated Sephadex LH-20 and RP C-18 column chromatography. From the results of spectroscopic methods including FAB-MS, 1D and 2D NMR, the structures of the compounds were determined as quercetin (1), guaijaverin (2), hirsutrin (3) and hyperin (4). These compounds (1-4) have not been reported in this tree yet.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.2 s.63
• /
• pp.47-52
• /
• 2005

This paper introduces a procedure for free span and fatigue analysis of offshore pipelines per DNV-RP-F105, 2002. The new method includes the axial force and deflection load in pipelines. The screening criteria were established to calculate the allowable span lengths in the new design codes. The screening criteria allows a certain amount of vortex-induced vibration due to wave and current loading. However, the induced pipe stresses are very small and usually below the limit stresess of typical S-N curves. In contrast, the conventional criteria did not allow any vortex-induced vibration in the free span of pipelines. Thus, the screening criteria yields reduced allowable span lengths. A simplified procedure was established to calculate the fatigue damage due to long-term current distribution. The long-term current statistics was assumed with a 3-parameter Weibull distribution. The fatigue damage was estimated for the span lengths obtained from the screening criteria for various conditions. Sample calculations show the effect of axial force for various boundary conditions. Comparisons with conventional criteria are included.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.5
• /
• pp.702-711
• /
• 1998

The characteristics of corrosion resistance for the surface of medium high carbon steels and low alloy steels utilizing as manufacturing the machinery structures and machining tools and treating by plasma/ion nitriding process have been studied in terms of electrochemical polarization behav-iors including corrosion potential(Ecorr) anodic polarization trends and polarization resistance(Rp) The seven base materials showed a clear passivation behavior for the polarization tests in the ASTM standard solution 1N ${H_2){SO_4}$ Although the treated surface by plasma nitriding for the seven test materials showed a significant increase in hardness the treatment gave a detri-mental effect in corrosion resistance. The various characteristics including corrosion potential polarization curves microstructures corrosion current polarization resistance among non-treat-ed nitriding and/or soft-nitriding treated specimens have been investigated and some of the mechanisms discussed.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.2
• /
• pp.212-218
• /
• 2006

Three out of fourteen Microcystis-dominant cyanobacterial blooms in Central India were found to be toxic to mice ($LD_{50}$ ranging from 35-450 mg bloom dry mass/kg body weight). The liver architecture of the treated mice showed characteristic symptoms of hepatotoxicity relative to the untreated controls, with increased enzyme activities of serum lactate dehydrogenase (LDH), serum glutamate oxaloacetate transaminase (SGOT), alkaline phosphatase (ALP), and serum glutamate pyruvate transaminase (SGPT). RP-HPLC revealed the presence of microcystin-LR, microcystin-RR, and desmethyl microcystin-RR in the given region to maximum amounts of 390, 1,030, and $860{\mu}g/g$ bloom dry weight, respectively, corresponding to a maximum of 2.8 mg/l microcystin-LR in the lake water. Further confirmation of the microcystin variants was conducted using a MALDI-TOF MS analysis.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2001.11a
• /
• pp.1-4
• /
• 2001

본 연구에서는 실크 직물 7종의 마찰음을 녹음한 후, 색채 변환시켜 소리와 변환색채에 e한 감성을 평가함으로써 시각과 청각을 만족시킬 수 있는 의류소재 개발에 대한 기초자료를 제공하고자 하였다. 피험자 30명을 대상으로 소리와 변환색채를 차례로 제공한 후 감성을 평가하도록 하였다. 물리량은 소리의 경우 LPT, $\Delta$L, $\Delta$f, ARC를 색채의 경우 RP, GP, BP, CC를 계산하여 감성과의 관계를 조사하였다. 소리와 색채에 대한 감성차원으로는 '우아함', '활동감', '터프함'의 세요인이 도출되었다. 각 감성차원에 대한 소리와 색채 물리량과의 관계를 살펴보면, LPT와 $\Delta$L이 작을수록, 홍색비율이 크고 색채빈도수가 적을수록 우아함차원으로 평가하였으며, LPT와 $\Delta$L의 값이 클수록, 녹색비율이 크고 색채빈도수가 많을수록 활동감차원으로 평가하였다. 또한 ARC값이 작을수록, 홍색비율이 클수록 터프함차원으로 나타났다. 직물별 소리와 색채에 대한 선호도는 전통적인 수자직 직물이 가장 높게 나타났다.

• YAKHAK HOEJI
• /
• v.43 no.3
• /
• pp.316-319
• /
• 1999

Chrysin 7-Ο-crotonate was synthesized by condensing crotonic acid with chrysin in organic solvent, tetrahydrofuran (THF) using dicyclohexylcarbodiimide (DCC) and 4-dimethylaminopyridine (DMAP). Its structure was indentified by NMR, MS, UV, IR etc. We also investigated the physico-chemical properties and set up the quantitative anytical method of this compound. The correlation coefficient of calibration curve measured at the isobestic point (340 nm) on this compound was approximately 0.9994 by absorption spetrophtometry. Detection limit was 1.6ng at S/N=3 by using a RP column by HPLC. The hair growth effect fo chrysin 7-Ο-crotonate on the hair of black mouse (C57BL/6), was carried out using paste method. When its ethanol solution was administered to this black mouse by route of skin, this compound promoted the growth of hair.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.6
• /
• pp.115-122
• /
• 2012

The purpose of this study is to optimize the design of the jack-up platform for 5MW offshore wind turbine system. Considering all the environmental loads such as currents, waves, winds and so on, the members of structures have been designed and optimized based on the AISC and API-RP-2A to be within the allowable stress even in the most critical and severe condition. In addition to the above strength check of structural members, the joint punching shear check and the hydrostatic collapse check are also performed where they are required for the design. The design life of the jack-up platform is 50 years for the static strength check and the fatigue design life is 100 years including to the DFF(Design Fatigue Factor) of 2.0 to have enough stability and workability for the design optimization.

• Journal of Ship and Ocean Technology
• /
• v.11 no.1
• /
• pp.25-35
• /
• 2007

This paper is concerned with the fatigue strength assessment of tendon porch found which is categorized as the special structural member in TLP. Large-scale tendon porch specimens have been designed and fabricated with API 2W Gr.50 steel recently produced by POSCO. Fatigue test has been carried out for three tendon porch specimens under various load level. Fatigue strength has been evaluated based on the nominal stress range and the results are compared with the fatigue design curve of DnV RP-C203. From the present experimental study, it has been found that the porch specimens satisfy the fatigue design rule although test was carried out under the positive stress ratio. It can be, therefore, said that the API 2W steel produced by POSCO possess sufficient fatigue strength.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.29-33
• /
• 2002

A procedure of free span and fatigue analysis of offshore pipelines was made per DNV-RP-F105, 2002. The new method includes the axial force and deflection load in pipelines. The screening criteria were used to calculate the allowable span lengths. The screening criteria allow small amplitudes of vortex-induced vibration due to wave and current loading. However, the induced pipe stress is very small and usually below the limit stress of a typical S-N curve. A simplified method was established to calculate the fatigue damage due to long-term current distribution. The long-term current statistics was assumed with a 3-parameter Weibull distribution. The fatigue damage was estimated for the span lengths obtained from the screening criteria for various conditions. Sample calculations show the effect of axial force for various boundary conditions.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.4
• /
• pp.11-19
• /
• 2013

In this paper we present a reodered simulated-anealing algorithm which is capable of applying odering based k-way partitioned clusters. This method is used for improvement of the objectives of partitioning which are k-way partitioned by using odering algorithm. It changes the positions of the clusters and the vertices in each clusters. Reodered vertices are splitted by using DP-RP method and this process has an opportunity to improve the objective functions. This algorithm has advantages to improve the quality of the solutions for various purposes. Experimental results on several graphs demonstrate that proposed algorithm provides substantial enhancement.