• The Journal of Advanced Prosthodontics
• /
• 제13권5호
• /
• pp.281-291
• /
• 2021

PURPOSE. To evaluate the wear of computer-aided design/computer-aided manufacturing (CAD-CAM) dental ceramic materials opposed by enamel as a function of increased chewing forces. MATERIALS AND METHODS. The enamel cusps of healthy human third molar teeth (n = 40) opposed by materials from CAD-CAM dental ceramic groups (n = 10), including Vita Enamic^® (ENA), a polymer-infiltrated ceramic network (PICN); GC Cerasmart^® (CERA), a resin nanoceramic; Celtra^® Duo (DUO), a zirconia-reinforced lithium silicate (ZLS) ceramic; and IPS e.max ZirCAD (ZIR), a polycrystalline zirconia, were exposed to chewing simulation (1,200,000 cycles; 120 N load; 1 Hz frequency; 0.7 mm lateral and 2 mm vertical motion). The wear of both enamel cusps and materials was quantified using a 3D laser scanner, and the wear mechanisms were evaluated by scanning electron microscopy (SEM). The results were analysed using Welch ANOVA and Kruskal Wallis test (α = .05). RESULTS. ZIR showed lower volume loss (0.02 ± 0.01 mm³) than ENA, CERA and DUO (P = .001, P = .018 and P = .005, respectively). The wear of cusp/DUO [0.59 mm³ (0.50-1.63 mm³)] was higher than cusp/CERA [0.17 mm³ (0.04-0.41 mm³)] (P = .007). ZIR showed completely different wear mechanism in SEM. CONCLUSION. Composite structured materials such as PICN and ZLS ceramic exhibit more abrasive effect on opposing enamel due to their loss against wear, compared to uniform structured zirconia. The resin nano-ceramic causes the lowest enamel wear thanks to its flexible nano-ceramic microstructure. While zirconia appears to be an enamel-friendly material in wear volume loss, it can cause microstructural defects of enamel.

• 마이크로전자및패키징학회지
• /
• 제5권2호
• /
• pp.49-52
• /
• 1998

이동통신용 핵심 부품인 W-LAN용 RF-Switch를 설계 및 제작하였다. 본 연구에서 는 CAD를 이용한 전송선로 설계기술, 소형화, 다층화 설계기술, 이동통신용 MCM 부품의 패턴설계를 개발하였으며 RF-Switch 설계하는기법 소형화 및 다층화를 위한 MCM공법을 얻을수 있었다. Ant-Rx On시 삽입손실은 0.48dB로 나타났다.

• 융복합기술연구소 논문집
• /
• 제1권1호
• /
• pp.9-12
• /
• 2011

Structural analysis of a tire is done using a commercial software, ANSYS Workbench. The properties of rubber of the tire is represented using a Mooney-Rivlin model. The bead in the tire is made of structural steel. 3D CAD model of the tire is obtained from a commercial CAD-specialized software, CATIA. Using an imported 3D CAD geometric model, a mesh system with fifty thousand nodes is constructed using ANSYS. A time-variant point force is applied to the rim of the tire, and the deformation of the tire is computed. It is found that both bending and twisting of the tire are observed where the point force is applied. The deformation of the tire is asymmetric, which results in the help of ripping the tire using the helper. It is also found that the deformation undergoes linearly with the applied force. When the force is larger than 1500N, then the deformation becomes larger than the half of the thickness of the tire. In the future, a more realistic rubber model will be applied and validated with the measured data.

• 대한치과기공학회지
• /
• 제39권1호
• /
• pp.1-7
• /
• 2017

Purpose: The purpose of this in vitro study compared to evaluation of repeatability of scanning abutment tooth stone model and impression applied CAD/CAM ISO standard in dentistry. Methods: To evaluate repeatability of scanning abutment tooth stone model, were repeatedly scanned to obtain 11 data via 3D stereolithography (STL) files. 10 data (STL files) were compared with the first 3D data (STL file), and the error sizes were measured by using 3D superimposing software(n=10). Also, the repeatability of scanning abutment tooth impression was evaluated with the same procedure. Independent t test was performed to evaluate the repeatability of scanning abutment tooth stone model versus impression through root mean square(RMS) and standard deviation(SD)(${\alpha}=0.05$). Results: $RMS{\pm}SD$ with regard to repeatability were $14.7{\pm}2.5{\mu}m$, $17.1{\pm}4.0{\mu}m$, respectively, with scanning abutment tooth stone model and impression(p=0.129). Conclusion: This study results showed a little different repeatability of scanning abutment tooth stone model and impression applied CAD/CAM ISO standard in dentistry, will suggest futures good studies and clinical advantages.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
• /
• pp.115-118
• /
• 2010

The concept of construction information systems (IS) is very comprehensive and subjective. Acronyms in relation to the construction IS may include BIM, CIC, IT, nD-CAD, ERP, CALS, KM and so on. These terminologies are used in a somewhat mixed way causing possible misunderstandings in research and practice of construction information systems. Moreover, ever-changing construction business environment has widely affected the roles and methods of utilizing construction IS. Examples of these changes are dissemination of alternative project delivery systems, global standardization under highly competitive overseas market, and advancement of information and communication technologies. In this context, the purpose of this paper is to propose a high-level framework for information systems in the construction industry. Several different concepts in the area of construction IS were investigated first in order to identify the major variables of the framework. Trends of research and real-world implementations were then analyzed to support the rationale of the variables. Finally, a framework was proposed by re-arranging the relevant issues. Findings of this paper indicate that different acronyms commonly share many similar concepts in their definitions, however, in each acronym, the motivations and approaches to implementing construction IS are very different. Different approach can provide maximum effectiveness, while overlaps may happen causing practical inefficiency.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1994년도 춘계공동학술대회논문집; 창원대학교; 08월 09일 Apr. 1994
• /
• pp.187-196
• /
• 1994

This study deals with roughing planning by cross sectional information generated from sculptured surfaces. Bicubic Bezier surface is adopted as sculptured surfaces in this paper. The system consists of 3 pstyd : 1) modeling sculptured surface, 2) reconstruction of cross-section in 2D coordinates, 3) determination of roughing tool path with structural data. The system is developed by using BIM-PC in the environment of Auto CAD R11, AutoLISP and MetaWare C. The proposed system shows an efficient algorithm for roughing planning with cross sectional information.

• 한국결정학회지
• /
• 제15권1호
• /
• pp.24-28
• /
• 2004

X-선 회절법을 이용하여 $C_{12}H_{15}N_3O_3$의 분자 및 결정구조를 해석하였다. 이 결정의 결정계는 Monoclinic이고 공간군은 $P2_1/c$이며, 단위포 상수는 a = 12.9955(9) ${\AA}$, b = 7.7137(5) ${\AA}$, c = 13.4699(11) ${\AA}$, ${\beta}$ = 107.86(1)$^{\circ}$, V = 1285.2(1) ${\AA}^3$, T = 296 K, Z = 4, $D_c$ = 1.350 $Mgm^{-3}$이다. 회절반점들의 세기는 Enraf-Nonius CAD-4 Diffractometer로 얻었으며 Mo $K{\alpha}$선(${\lambda}$ = 1.71073 ${\AA}$)을 사용하였다. 분자구조는 Direct method로 풀었으며, $F_0\;>\;4{\sigma}(F_0)$인 1644개의 독립 회절 데이터에 대하여 최소자승법으로 193개의 변수를 정밀화하여 최종 신뢰도 값 R = 4.19%을 얻었다.

• 한국결정학회지
• /
• 제15권2호
• /
• pp.93-98
• /
• 2004

X-선 회절법을 이용하여 C_{28}H_{41}N_4O_4Br\;{\cdo}t\;2H_2O$의 분자 및 결정구조를 해석하였다. 이 결정의 결정계는 Triclinic이고 공간군은 Pl이며, 단위포 상수 a=9.000(1) $\AA$, b=9.312(3) $\AA$, c=9.344(2) $\AA$, $\alpha=89.37(20)^{\circ},\;\beta=68.81(3)^{\circ},\;\gamma=84.70(4)^{\circ},\;V=726.7(8){\AA},\;T=298K,\;Z=1,\;D_c=1.402Mgm^{-3}$이다. 회절반점들의 세기는 Enraf-Nonius CAD4 Diffractometer로 얻었으며 사용한 X-선은 graphite로 단색화한 $MoK{\alpha}$선$(\lambda=0.71073\;{\AA}$을 사용하였다. 분자구조는 Direct method로 풀었으며, $F_o>4{\sigma}(F_0)$인 2521개의 독립 회절 데이터에 대하여 최소 자승법으로 370개의 변수를 정밀화하여 최종 신뢰도 값 $R=5.95\%$를 얻었다.

• 한국결정학회지
• /
• 제15권2호
• /
• pp.99-103
• /
• 2004

X-선 회절법을 이용하여 $C_{16}H_{19}O_2N_3CuCl_2\;{\cdot}\;H_2O$의 분자 및 결정구조를 해석하였다. 이 결정의 결정계는 Triclinic이고 공간군은 Pl이며, 단위포 상수는 $a=7.6202(9)\;{\AA},\;b=8.5943(7){\AA},\;c= 8.6272(6){\AA},\;\alpha=67.518(6)^{\circ},\; \beta= 68.043(8)^{\circ},\;\gamma=74.370(8)^{\circ},\;V=478.89(8)\;{\AA}^3,\;T=295K,\; Z=1,\;D_c=1.504Mgm^{-3}$이다. 회절반점들의 세기는 Enraf-Nonius CAD-4 Diffractometer로 얻었으며 graphite로. 단색화한 $MoK{\alpha}$,$(\alpha=0.7107\;\AA)$을 사용하였다. 분자구조는 Direct method로 풀었으며, $F_0>4\sigma(F_0)$인 1659개의 독립회절데이터에 대하여 최소 자승법으로 234개의 변수를 정밀화하여 최종 신뢰도 값 $R=2.47\%$를 얻었다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권3호
• /
• pp.27-33
• /
• 2001

The aim of the present work is to propose a model for Computer Aided programming of numerical Control lathe. This model is based on the concept by features. It has been developed in an Artificial Intelligence environment, that offers a rapidity as well as a precision for NC code elaboration. In this study a pre-processor has been elaborated to study the geometry of turning workpiece. This pre-processor is a hybrid system which combine a module of design by features and a module of features recognition for a piece provided from an other CAD software. Then, we have conceived a processor that is the heart of the CAD/CAM software. The main functions are to study the fixture of the workpiece, to choose automatically manufacturing cycles, to choose automatically cutting tools (the most relevant), to simulate tool path of manufacturing and calculate cutting conditions, end to elaborate a typical manufacturing process. Finally, the system generates the NC program from information delivered by the processor.