• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.5
• /
• pp.477-492
• /
• 1993

In order to investigate the n-3 highly unsaturated fatty acids (n-3HUFA) requirement of the Korean rockfish Sebastes schlegeli, two experiments were conducted in the flush-out aquarium system. 1. Effects of different dietary fatty acids on growth and feed efficiency Efficacy of different fatty acids on the Korean rockfish was investigated by feeding diets containing each of the different fatty acids, 12:0, 18:1n-9, 18:2n-6, 18:3n-3, and n-3HUFA for 9 weeks. The best growth and feed efficiency were obtained from the fish fed diet containing n-3HUFA (P<0.05). 2. n-3HUFA requirement Requirement of dietary n-3HUFA for the Korean rockfish (5.9 g in mean body weight) was investigated with the test diets containing different levels of n-3HUFA ranging from $0\%$ to $4.0\%$ at $8\%$ dietary lipid level. After 6 weeks of feeding experiment, fish performance and fatty acid composition of liver were studied. Growth was significantly improved with increasing dietary n-3HUFA level up to the $0.9\%$ in the diet (P<0.05). Higher values of lipid content, 18:1/n-3HUFA ratio of polar lipid of liver and hepatosomatic index were observed in the fish fed n-3HUFA deficient diets. The groups of fish fed lower levels of dietary n-3HUFA showed higher 18:1 and love. n-3HUFA (EPA+DHA) levels in polar lipid of the liver. The data obtained in these experiments indicated that dietary n-3HUFA was essential for the Korean rockfish, and required level of n-3HUFA was around $0.9\%$ in diet.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.1
• /
• pp.84-93
• /
• 2004

This study was performed : 1) to find the suitable HRT(hydralic retention time), 2) to evaluate the effects of the ratio of mixing/aeration time and injection time of external carbon source, for the removal of organics, nitrogen and phosphorus in swine wastewater by SBR(sequencing batch reactor process), which is one of the biological treatment process. The result of this study were summarized as follows : (1) As the ratio of mixing/aeration time was higher, $NH_4{^+}-N$ removal efficiency was increased and it was increased with increasing injection time of external carbon source because nitrification was affected by denitrification microbes propagation when injection time of external carbon soruce was shorted. T-N removal efficiency was increased with increasing the ratio of mixing/aeration time and injection time of external carbon source. (2) The T-P removal efficiency showed a great difference in each operating condition, and it was increased with increasing the ratio of mixing/aeration time increased and when the injection time of external carbon source was shorted because denitrification was done with effect by denitrification microbes propagation. (3) The highest removal efficiency of organic and nitrogen were obtained by the operating condition of Run 4-1(the ratio of mixing/aeration time : 16.5/5.5, injection time of external carbon source : 15hours) and T-P were obtained by the operation condition of Run 4-2(the ratio of mixing/aeration time : 16.5/5.5, injection time of external carbon source : 3hours), and efficiency(effluent concentration)of $BOD_5$, $COD_{Mn}$, $COD_{Cr}$, T-N and T-P in the treated water was 96.1%, 87.7%, 90.6%, 86.6% and 84.5%, respectively.

• Journal of the Korean institute of surface engineering
• /
• v.48 no.5
• /
• pp.211-217
• /
• 2015

To fabricate white LED having a high color rendering index value, red color phosphor mixed with the green color phosphor together in the blue chip, namely the blue chips with RG phosphors packaging is most favorable for high power white LEDs. In our previous papers, we reported on successful syntheses of $Sr_{2-}$ $Si_5N_8:Eu^{2+}$ and $CaAlSiN_3$ phosphors for red phosphor. In this work, for high power green phosphor, greenemitting ternary nitride $Ba_3Si_6O_{12}N_2:Eu^{2+}$ phosphor was synthesized in a high frequency induction furnace under $N_2$ gas atmosphere at temperatures up to $1400^{\circ}C$ using $EuF_3$ as a raw material for $Eu^{2+}$ dopant. The effects of molar ratio of component and experimental conditions on luminescence property of prepared phosphors have been investigated. The structure and luminescence properties of prepared $Ba_3Si_6O_{12}N_2:Eu^{2+}$ phosphors were investigated by XRD and photoluminescence spectroscopy. The excitation spectra of $Ba_3Si_6O_{12}N_2:Eu^{2+}$ phosphors indicated broad excitation wavelength range of 250 - 500 nm, namely from UV to blue region with distinct enhanced emission spectrum peaking at ${\approx}530nm$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.11
• /
• pp.1773-1780
• /
• 2018

Objective: This study was to evaluate effects of mixed plant oils (identified as mixed oil 1 [MO1] and mixed oil 2 [MO2]) on performance, serum composition, viscera percentages, meat quality, and fatty acid deposition of broilers. Methods: A total of 126 one-day-old Arbor Acres male broiler chicks (weighing $44.91{\pm}0.92g$) were randomly allocated to 1 of 3 treatments with 7 replicate pens per treatment (6 broilers per pen). Dietary treatments included a corn-soybean basal diet supplemented with 3% soybean oil (CTR), basal diet with 3% MO1 (a mixture of 15% corn oil, 10% coconut oil, 15% linseed oil, 20% palm oil, 15% peanut oil and 25% soybean oil; MO1), or basal diet with 3% MO2 (a combination of 50% MO1 and 50% extruded corn; MO2). The trial consisted of phase 1 (d 1 to 21) and phase 2 (d 22 to 42). Results: Compared to CTR, broilers fed MO (MO1 or MO2) had greater (p<0.05) average daily gain in phase 1, 2, and overall (d 1 to 42), redness in thigh muscle, concentrations of serum glucose, serum albumin, saturated fatty acids (SFA) and n-6/n-3 polyunsaturated fatty acids (PUFA) ratio in breast muscle, while these broilers also showed lower ($p{\leq}0.05$) drip loss and concentrations of C18:3n-3 and PUFA/SFA ratio in breast muscle. Broilers fed MO2 had higher (p<0.05) liver percentage, while broilers fed MO1 had lower ($p{\leq}0.05$) feed conversion ratio in phase 1 and increased (p<0.05) contents of C18:2n-6, C20:5n-3, C22:6n-3, and n-3 PUFA in breast muscle compared to CTR. Conclusion: Mixed plant oils had positive effects on performance, serum parameters, meat quality, liver percentage and fatty acid deposition in broilers, which indicates they can be used as better dietary energy feedstocks than soybean oil alone.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.4
• /
• pp.446-454
• /
• 2005

An economic treatment method to remove oxidized nitrogen from wastewater is biological denitrification with organic matters. Several organics can be used, however, methanol is commonly used. When methanol is provided, M:N (Methanol to Nitrogen) ratio is used to define methanol demand for denitrification. In this study, two artificial wastewaters were provided to a biological system to evaluate denitrification performance. Differences of influent total CODcr from effluent soluble CODcr were converted to methanol equivalent and oxidized nitrogen difference between influent and effluent were converted to nitrate equivalent to define M:N ratios. Modes I, II, III, I-1 and IV showed 5.1, 2.7, 3.3, 2.3 and 2.6 of M:N ratios, respectively. Since denitrifying microorganisms had to build a new metabolic system for methanol and influent organics, initial operation mode, Mode I, required more methanol and this resulted in high M:N ratios compared with later operation mode, Mode I-1. Salt in influent did not show inhibitory effects on denitrfication, although this was believed to increase effluent SS and soluble CODcr concentrations in Mode III, I-1 and IV, respectively. The concentrations of effluent soluble $COD_{Mn}$ did not changed much with influent salt.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.6
• /
• pp.36-43
• /
• 2003

In machining of ceramic materials, they are very difficult-to cut materials because of there high strength and hardness. Machining of ceramics are characterized by cracking and brittle fracture. Generally, ceramics are machined using conventional method such as finding and polishing. However these processes are generally costly and have low MRR(material removal rate). This paper focuses on determining the optimal levels of process parameters for products with CNC machining center. For this purpose, the optimization of cutting parameters is performed based on experimental design method. A design and analysis of experiments is conducted to study the effects of these parameters on the surface roughness by using the S/N ratio, analysis of ANOVA and F-test. Cutting parameters, namely, cutting speed, feed and depth of cut are optimized with consideration of the surface roughness.

• Journal of the Korean Vacuum Society
• /
• v.7 no.3
• /
• pp.242-247
• /
• 1998

Hydrogenated amorphous carbon nitride[a-C:H(N)] films were deposited on p-type Si(100) at room temperature with bias voltage of 200 V by DC saddle-field plasma-enhanced chemical vapor deposition. Effects of the ratio of $N_2$ to $CH_4$($N_2/CH_4$), in the range of 0 and 4 on such properties as optical properties, microstucture, relative fraction of nitrogen and carbon, etc. of the films have been investigated. The thickness of the a-C:H(N) film was abruptly decreased with the addition of nitrogen, but at $N_2/CH_4$>0.5, the thickness of the film gradually decreased with the increase of the $N_2/CH_4$. The ratio of N to C(N/C) of the films was saturated at 0.25 with the increase of $N_2CH_4$. N-H, C≡N bonds of the films increased but C-H bond decreased with the increase of $N_2CH_4$.Optical band gap energy of the film decreased from 2.53 eV at the ratio of $N_2CH_4$=4.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.315-315
• /
• 2013

We report the electronic structure modification in the swift heavy ion (SHI) irradiated N-doped ZnO thin films prepared by RF sputtering from ZnO target in different ratio of Ar/$N_2$ gas mixture using highly pure $N_2$ gas. The different N-ZnO thin lms were then irradiated with 120 MeV Ag ion beam with different doses ranging from $1{\times}10^{11}$ to $5{\times}10^{12}$ ions/$cm^2$ and characterized by XRD and near edge X-ray absorption ne structure (NEXAFS) at N and O K-edges. The NEXAFS measurements provide direct evidence of O 2p and Zn 3d orbital hybridization and also the bonding of N ions with Zn and O ions. The minimum value of resistivity of $790{\Omega}cm$, a Hall mobility of $22cm^2V^-1s^-1$ and the carrier concentration of $3.6{\times}10^{14}cm^{-3}$ were yielded at 75% $N_2$. X-ray diffraction (XRD) measurements revealed that N-doped ZnO films had the preferential orientation of (002) plane for all samples, while crystallinity start decreasing at 32.5% $N_2$. The average crystallite size varies from 5.7 to 8.2 nm for 75% and then decreases to 7.8 nm for 80% $Ar:N_2$ ratio.

• Journal of Animal Environmental Science
• /
• v.5 no.1
• /
• pp.53-62
• /
• 1999

This study was carried out to investigate how to reuse the livestock waste and develop fly ash as a subsitution of sawdust which is used commonly to make compost. Fly ash and sawdust were mixed the ratio of 8 to 2, 7 to 3, 6, to 4, 5 to 5, 4 to 6. 3 to 7 and 2 to 8 after fermentation for 60 days the change of temperature, moisture, pH, organic matter, nitrogen content and C/N ratio were analyzed. The results are as follows; Temperature was reached to maximum (63.5$^{\circ}C$) more quickly in scraper type than in slurry type with adding large sawdust. When fly ash and sawdust were mixed same amount at scraper type and slurry type, moisture was 46.6~53.7% and maintained a good condition for fermentation. pH was showed the range of 7~10 as a mixture of fly ash. Organic matter contents were increased with increasing the added sawdust but did not show any tendency. Nitrogen content was also increased with increasing the amount of added sawdust but did not show any tendency. C/N ratio was increased to 20~60 with increasing the added sawdust, but when sawdust and fly ash were mixed 50:50, there was no significant during fermentation periods. In conclusion, supplementation of fly ash at the level of 50% of sawdust maintained a good condition for fermentation as a livestock waste composting.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.185-188
• /
• 1996

The doped n-type $Al_{x}Ga_{1-x}Sb$ crystals were grown by the vertical Bridgman method at composition ratio x=0, x=0.1, x=02 respectively. The lattice constants of the $Al_{x}Ga_{1-x}Sb$ crystals were 6.096${\AA}$, 6.097${\AA}$, 6.106${\AA}$ at composition ratio respectively. The carrier concentration, the resistivity, and the carrier mobility measured by the Van der Pauw method at x-0 were n≡1 x $10^{17}$$cm^{-3}$, $\rho$≡0.15 ${\Omega}$-cm, ${\mu}$$_{n}$≡500 $\textrm{cm}^2$$V^{-1}$$sec^{-1}$ at 300K. The carrier concentration, the resistivity, and the carrier mobility measured by the Van der Pauw method at x=0.1 were n≡2.96 x $10^{15}$$cm^{-3}$, $\rho$≡103 $\textrm{cm}^2$$V^{-1}$$sec^{-1}$ at 300K.