• 제목/요약/키워드: n/w value

검색결과 460건 처리시간 0.027초

1W DC-DC 컨버터를 위한 7$\times$7 mm 평면 인덕터의 제조 (Fabrication of the 7$\times$7 mm Planar Inductor for 1W DC-DC Converter)

  • 배석;류성룡;김충식;남승의;김형준;민복기;송재성
    • 한국자기학회지
    • /
    • 제11권5호
    • /
    • pp.222-225
    • /
    • 2001
  • 1W급의 DC-DC converter에 탑재하기 위해 FeTaN 연자성 자성박막을 이용한 박막형 인덕터를 제조하여 특성을 평가하였다. 자심부분은 2$\mu\textrm{m}$ 두게의 F $e_{78.81}$T $a_{8.47}$ $N_{12.71}$ 연자성 박막을 사용하였으며 코일부분은 100$\mu\textrm{m}$ 두게의 Cu를 사진공정과 전기도금공정을 이용하여 제조하였다. 제조된 박막 인덕터의 디자인은 상호인덕턴스를 효율적으로 증가시킬 수 있는 double rectangular spiral형태였으며 측정된 특성은 DC-DC converter의 작동주파수인 1 MHz에서 인덕턴스 980nH, 저항 1.7 $\Omega$Q 값은 3.55였다.다.

  • PDF

EFFECT OF ADDITION OF INTACT OR ALKALIZED LUCERNE JUICE AT ENSILING ON THE NUTRITIVE VALUE OF RICE STRAW SILAGE

  • Nishino, N.;Ohshima, M.;Yokota, H.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제5권3호
    • /
    • pp.487-494
    • /
    • 1992
  • This experiment was conducted to study the effect of addition of Lucerne juice (LJ) obtained by mechanical extraction of freshly harvested crop on the nutritive value of rice straw silage. Rice straw (RS) was ensiled with intact, NaOH or $NH_3$ treated LJ at 3:7 ratio on fresh weight basis (LJ RS, LJ NaOH RS and LJ $NH_3$ RS, respectively). Each alkali was mixed with fresh juice at a level of 4% of rice straw dry matter just before ensiling. Rice straw ensiled with water was prepared as the control (W RS). In the digestion trial, goats were allocated in a $4{\times}4$ Latin-square design and fed the diet containing three parts of RS silage and one part of wheat bran (DM basis). For the goats receiving the control silage, urea was supplemented at feeding time so as to adjust the nitrogen intake except for goats on LJ $NH_3$ RS silage. Crude protein content of RS silage was increased from 5.2 to 9.1% (DM basis) by the addition of intact LJ and to about 24% by $NH_3$ treated LJ. The control W RS silage contained only trace amount of lactic acid and was dominated by acetic and butyric acid. The addition of intact LJ reduced butyric acid content and $NH_3-N/TN$ of the silage whereas the addition of alkalized LJ increased those values and shifted to a butyrate type fermentation. Nutrient digestibilities and nitrogen balance of goats were almost the same when they were fed W RS and LJ RS silage indicating the addition of intact LJ did not improve the nutritive value. The addition of alkalized LJ significantly increased the fiber digestibilities of RS silage and $NH_3$ treatment was more effective than NaOH treatment. Postprandial ruminal $NH_3-N$ and blood urea nitrogen (BUN) concentrations were decreased by feeding LJ NaOH RS silage suggesting ruminal protein synthesis was enhanced along with the increase of energy supply for supply for rumen microbes by the alkali treatment. The advantageous fiber digestibilities of LJ $NH_3$ RS silage compared with those of LJ NaOH RS silage might be attributable to a sufficient nitrogen supply for microbial fiber digestion in the rumen.

화학적 제어제에 의한 담배모자이크 바이러스의 불활성화 (Inactivation by Chemical Disinfectants in vitro against Tobacco Mosaic Virus)

  • 최창원
    • 자연과학논문집
    • /
    • 제10권1호
    • /
    • pp.17-21
    • /
    • 1998
  • 담배모자이크 바이러스에 대한 항바이러스 활성을 검사하기 위해 다양한 화학제를 처리한 결과, 1NHCl과 0.1-1N NaOH에 바이러스와 외피에 보호된 RNA가 완전하고 신속하게 분해되었다. TMV를 0.1N HCl에 처리하였을 때 바이러스의 외피단백질은 산의 가수분해에 의해 부분 분해되었으나, 0.01N HCl 혹은 0.01N NaOH에 처리했을 때는 분해되지 않았다. 위의 결과에서 적절한 산이나 알칼리에 처리하는 것은 바이러스를 제거하는데 효과적인 가치가 있음이 판명되었다. 50% isopropanol과 UV처리는 바이러스와 외피화된 RNA에 어떤 효과도 미치지 않았다. 농장의 농기구와 실험실 기구를 바이러스의 오염으로부터 방지하기 위해서는 적절한 화학제의 적용이 필요하다.

  • PDF

AlN 기판을 이용한 RF 고전력 증폭기 모듈 (RF High Power Amplifier Module using AlN Substrate)

  • 김승용;남충모
    • 한국전기전자재료학회논문지
    • /
    • 제22권10호
    • /
    • pp.826-831
    • /
    • 2009
  • In this paper, a high power RF amplifier module using AlN substrate of high thermal conductivity has been proposed. This RF amplifier module has the advantage of compact size and effective heat dissipation for the packaging of high power chip. To fabricate the thru-hole and scribing line on AlN substrate, the key parameters of $CO_2$ laser were experimented. And then, microstrip lines and spiral planar inductors were fabricated on an AlN substrate using the thin-film process. The fabricated microstrip lines on the AlN substrate has an attenuation value of 0.1 dB/mm up to 10 GHz. The fabricated spiral planar inductor has a high quality factor, a maximum of about 62 at 1 GHz for a 5.65 nH inductor. Packaging of a RF power amplifier was implemented on an AlN substrate with thru-hole. From the measured results, the gain is 24 dB from 13 to 15 GHz and the output power is 33.65 dBm(2.3 W).

S화력발전소 3, 4호기 증설에 따르는 정밀발파작업으로 인한 인접가동발전기및 구조물에 미치는 파동영향조사 (On the vibration influence to the running power plant facilities when the foundation excavated of the cautious blasting works.)

  • 허진
    • 화약ㆍ발파
    • /
    • 제8권1호
    • /
    • pp.3-16
    • /
    • 1990
  • The cautious blasting works had been used with emulsion explosion electric M/S delay caps. Drill depth was from 3m to 6m with Crawler Drill $\varphi{70mm}$ on the calcalious sand stone(sort-moderate-semi hard Rock). The total numbers of feet blast were 88. Scale distance were induces 15.52-60.32. It was applied to propagation Law in blasting vibration as follows. Propagtion Law in Blasting Vibration $V=K(\frac{D}{W^b})^n$ where V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites (m) W : Maximum Charge per delay-period of eighit milliseconds or more(Kg) K : Ground transmission constant, empirically determind on th Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents Where the quantity $D/W^b$ is known as the Scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagrorized in three graups. Cabic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge per delay Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom and over loom distance because the frequency is verified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30m----under l00m----- $V=41(D/3\sqrt{W})^{-1.41}$ -----A Over l00m-----$V= 121(D/3\sqrt{W})^{-1.66}$-----B K value on the above equation has to be more specified for furthur understang about the effect of explosives, Rock strength. And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

  • PDF

S 화력발전소 3, 4호기 증설에 따르는 정밀발파작업으로 인한 인접가동발전기 및 구조물에 미치는 진동영향조사 (On the vibration influence to the running power plant facilities when the foundation excavated of the cautious blasting works.)

  • 허진
    • 화약ㆍ발파
    • /
    • 제9권4호
    • /
    • pp.3-12
    • /
    • 1991
  • The cautious blasting works had been used with emulsion explosion electric M /S delay caps. Drill depth was from 3m to 6m with Crawler Drill 70mm on the calcalious sand stone (soft-moderate-semi hard Rock) . The total numbers of feet blast were 88. Scale distance were induces 15.52-60.32. It was applied to Propagation Law in blasting vibration as follows .Propagtion Law in Blasting Vibration V=k(D/W/sup b/)/sup n/ where V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W ; Maximum Charge per delay -period of eight milliseconds or more(Kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents Where the quantity D/W/sup b/ is known as the Scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagrorized in three groups. Cabic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge delay Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom and over loom distance because the frequency is varified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30m--under 100m----V=41(D/ W)/sup -1.41/-----A Over l00m---------V=121(D/ W)/sup -1.56/-----B K value on the above equation has to be more specified for furthur understand about the effect of explosives. Rock strength, And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

  • PDF

선체용 압연강판에 대한 습식 수중 아크용접부의 기계적 특성에 관한 연구 (A Study on the Mechanical Properties of Underwater Wet Arc Welds using the SM41)

  • 김창규;곽희환;김민남
    • 동력기계공학회지
    • /
    • 제12권2호
    • /
    • pp.48-54
    • /
    • 2008
  • Underwater wet arc welds of rolled steel plate (SM41) where studied welding and mechanical properties macro and narrow than that of the other things. Tensile strength of UWEB obtained to 521.5 MPa and of USBL was 524.1 MPa, but the highest elongation value was 4.68 %(UWEB). Bending strength(1166.6 MPa) of USBL is the largest and of UWEB in 1047 MPa, But deflection(22.73 mm) of UWEB in large than that of USBL(22.63 mm). Impact value(144.36 $J/cm^2$) of JPUW is the largest and of UWEB(140 $J/cm^2$) come after.

  • PDF

선형이론에 의한 복잡지형 내 난류 특성의 예측 (A Prediction of Turbulent Characteristics in a Complex Terrain by Linear Theory)

  • 윤정은;경남호;김성완
    • 한국태양에너지학회 논문집
    • /
    • 제25권1호
    • /
    • pp.79-86
    • /
    • 2005
  • The external conditions for estimating dynamic wind loads of wind turbines, such as the turbulence, the extreme wind, the mean velocity gradients and the flow angles, are simulated over GangWon Wind Energy Test Field placed in one of the most complex terrain in Korea. Reference meteorological data has been gathered at a height of 30m from 2003 to 2004 with a ultrasonic anemometer. The absolute value of the spectral energy are simulated and the verification of this prediction has been carried out with comparing to the experimental data. The most desirable place for constructing new wind turbine are resulted as Point 2 and Point 3 due to the lower value of Turbulence Intensity and the higher value of wind resource relatively.

탄성 변형을 이용한 동력이 표시되는 감속기 (Speed reducer be indicated a power using of elastic strain)

  • 노수영;남원기;강현국;김남일;김영탁;오세훈
    • 동력기계공학회지
    • /
    • 제10권4호
    • /
    • pp.181-186
    • /
    • 2006
  • In this paper, a noncontact type torque meter using silicone rubber to measure the exact torque value and reduce a vibration and a noise, was developed. When planetary gear speed reducer runs, torque, RPM etc.. of motor change according to load or speed change. So, it needs a device to detect load's change or to diagnose the state of thewhole drive department by monitoring these result values. The noncontact type torque meter using silicone rubber that we're trying to develop this time is low-cost and can measure RPM and torque value simply. Also, it caculate a power using this value and indicate them on screen.

  • PDF

열대 및 아열대 SST에 관련된 동아시아 강우량의 경년 변동성 (Interannual variabilities of the East Asia precipitation associated with tropical and subtropical sea surface temperature)

  • 하경자
    • 한국환경과학회지
    • /
    • 제4권5호
    • /
    • pp.28-28
    • /
    • 1995
  • The aim of the present study is to investigate the interannual variabilities of the East Asia monsoon rainfall associated with the global sea surface temperature anomaly(SSTA). For this study, the summer rainfall(from June to August) over the twenty-eight period of 1961-1988 were analyzed with being divided by nine-subregions over East Asia including Korea, China and Japan. From the analysis of the principal modes explaining the interannual variation, the interannual variabilities of summer rainfalls in South Japan and Korea are larger than those of the other subregions of the East Asia. There is a strong negative correlation between the summer rainfalls of south China and Korea. In this study, the relationship between the summer monsoon of each subregion and SSTs of the tropical NINO regions, of western Pacific warm pool, and of the subtropical ocean were investigated. The longitudinal sections of the lagged cross correlations of the summer rainfal1 anomaly in (a) Korea and (b) south China, and the monthly SSTA in the equatorial(averaged from 65 to 6N) Pacific were analyzed. The negative maximum correlation pattems of Korea''s stammer rainfal1 and SSTs over the eastern Pacific is transfered to positive maximum conrlation over central Pacific region with a biennial periodicity. In South China, the significant positive correlations are found at -12 month lag over the eastern Pacific and maximum negative correlation at 16 month lag over the central Pacific with the quasi-biennial oscillation. But the correlation coefficient reverses completely to that in Korea. In order to investigate the most prevailing interannual variability of rainfall related to the favored SSTA region, the lagged cross correlations between East Asia rainfall and SSTs over the moO regions(NINO 1+2(0-105, 90W-80W), NINO 3(5N-5S, 150W-90W), NINO 4(5N-5S, 160E-l50W) and the western Pacific worm pool (5N-5S, 120E-l60E) were analyzed. Among the lagged cross-correlation cycles in NINO regions, the maximum correlations for the negative lagged months prevail in NINO 1+2 and NINO 3, and the cross correlations for the positive lagged months NINO 4. It is noteworthy that correlation between the western Pacific warm pool SSTA and the monsoon rainfall in Korea and South China have the maximum value at negative 4 month lag. The evolution of the correlation between the East Asia monsoon rainfall and SSTA is linked to the equatorial convective cluster and related to northward propagating situation, and raising the possibility that the East Asia monsoon precipitation may be more fundamentally related to the interaction of intraseasonal oscillations and the sub-regional characteristics including the surface boundary conditions and the behavior of climatological air mass.