• Asian-Australasian Journal of Animal Sciences
• /
• 제12권5호
• /
• pp.742-746
• /
• 1999

The potential of Leucaena leucocephala and Prosopis cineraria leaves as nitrogen supplements ($16g/kg\;W^{0.75}/d$) to improve the utilization of a basal diet of rice straw by goats was assessed in a feeding trial. Rice straw supplementation with forage oats (Avena sativa) was fed as a control diet. DMI, $g/kgW^{0.75}$ of rice straw by goats receiving Leucaena was significantly (p<0.05) higher followed by Prosopis and oat fodder. The supplementation of Leucaena improved the digestibility coefficient of DM, OM, CP, NDF and ADF nutrient density. Goats on Prosopis or oat fodder supplemented straw responded similarly in terms of nutrient utilization. The intake ($g/kgW^{0.75}$) of DCP, TDN and nitrogen balance of goats were significantly higher (p<0.05) when Leucaena was fed. It is suggested that the Leucaena may be a useful N-supplement in areas where livestock are fed poor quality crop residues.

• Molecular & Cellular Toxicology
• /
• 제3권1호
• /
• pp.68-75
• /
• 2007

[ $\alpha$ ]-Terpinene has been known as a repellent against the mosquito Culex pipiens pallens Coquillett based on a human forearm bioassay. $\alpha$-Terpinene showed significantly greater repellency than a commercial formulation, N, N-diethyl-m-methylbenzamide (deet). In this study, skin and eye sensitivity of $\alpha$-terpinene (2%) was examined with bioassays using white New Zealand rabbits. There were somewhat gross and histological changes observed in these treatments. Eye irritancy assays examined gross changes to cornea, iris and conjuctiva, and histological changes to smear of ocular discharge and eye tissue. Treated rabbits were divided into two cohorts, a saline washed cohort (W) or a non-washed cohort (NW). Opacity of cornea and redness, chemosis and discharge of conjuctiva were observed in both cohorts, but disappeared within 4 and 10 days in W and NW, respectively. Main components of ocular discharges were fibrin, epithelial or epitheloid cells, lymphoid cells, erythrocytes and granulocytes. These abnormal cellular components disappeared within 4 days and 10 days in W and NW, respectively. No permanent histological differences were observed between the two cohorts. However, severe irritation was determined as 57.2 of I.I.O.I value on the first day after treatment. These findings indicate a spray-type solution containing 2% $\alpha$-terpinene may serve as an alternative mosquito repellent and further studies need to reduce the eye irritation with formulation changes.

• Corrosion Science and Technology
• /
• 제16권3호
• /
• pp.100-108
• /
• 2017

In this investigation corrosion behavior of newly developed high-pressure die cast Al-Ni (N15) and Al-Ni-Ca (NX1503) alloys was studied in 3.5% NaCl solution. The electrochemical corrosion behavior was evaluated using open circuit potential (OCP) measurement, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) techniques. Potentiodynamic polarization results validated that NX1503 alloy exhibited lower corrosion current density ($i_{corr}$) value ($5.969{\mu}A/cm^2$) compared to N15 ($7.387{\mu}A/cm^2$). EIS-Bode plots revealed a higher impedance (${\mid}Z{\mid}$) value and maximum phase angle value for NX1503 than N15 alloy. Equivalent circuit curve fitting analysis revealed that surface layer ($R_1$) and charge transfer resistance ($R_{ct}$) values of NX1503 alloy was higher compared to N15 alloy. Immersion corrosion studies were also conducted for alloys using fishing line specimen arrangement to simultaneously measure corrosion rates from weight loss ($P_W$) and hydrogen volume ($P_H$) after 72 hours and NX1503 alloy had lower corrosion rate compared to N15 alloy. The addition of Ca to N15 alloy significantly reduced the Al3Ni intermetallic phase and further grain refinement may be attributed for reduction in the corrosion rate.

• Asian-Australasian Journal of Animal Sciences
• /
• 제2권2호
• /
• pp.123-128
• /
• 1989

An experiment was conducted to study the effect of frequency of defoliation on the ensiling characteristics and nutritive value of Guineaecotype 'A' (Panicum maximum Jacq) grass. Guinea grass harvested at 2, 3, 4, 5, 6, 7, 8, 9, 10 and 12-week cutting intervals was chopped (2 cm) and ensiled alone or with the addition of coconut (Cocos nucifera L.) meal (w/w-fresh weight basis), for periods of 6, 7 or 8 weeks in 2-litre laboratory silos. Dry matter, water soluble carbohydrates, lactic acid, pH, ash, nitrogen and digestibility in vitro were measured in representative samples of preensiled and ensiled material. Dry matter content of silages prepared from herbage harvested at 2 and 3 weeks intervals was lower (P<0.05) compared to longer defoliation intervals. The pH of silage prepared from herbage over 8 weeks old were higher (P<0.05) than those harvested below 8 weeks. The water soluble carbohydrate content of silage prepared from 3-weekly defoliated herbage was higher (P<0.05) than those prepared from longer periods. Lengthened growth period decreased (P<0.001) the crude protein content of the ensiled material, whereas the addition of coconut meal resulted in marginal increases. In vitro organic matter digestibility of the silages decreased (P<0.05) with the increase in forage maturity.

• Journal of Nutrition and Health
• /
• 제7권4호
• /
• pp.25-29
• /
• 1974

A complete study of the nutritive value of foods in Korea is required as essential basic data in the planning of food supply and demand, the implementation of national nutritive survey and the development of dietary improvement, nutritional education and various nutritional administration projects. The kinds, numbers and nutritive value of foods we consume in our everyday life vary markedly according to the weather, soils, and the economic system of the region. A study of the current status of Korea in terms of the nutritional value of foods consumed is urgently required. For this reason, a study was conducted of 29 kinds of foods including 5 kinds of mushrooms, 19 kinds of vegetables and 5 kinds of seafoods. The foods examined were randomly collected from major markets in Seoul. The results are summarized in the accompanying tables.

• 열처리공학회지
• /
• 제12권2호
• /
• pp.136-144
• /
• 1999

The study on the wear characteristics of compound layers formed during gaseous nitrocarburising in the medium carbon boron steels and the plain carbon steel has been carried out by using a pin-on-disc type wear test machine under the oil lubricating condition at room temperature and by varying applied loads, sliding speeds and wear distances. Values of friction coefficient measured at the sliding speed of 0.4m/sec under the oil lubricating condition have been shown to decrease considerably with increasing applied load and become gradually a constant value as load is increased to a higher value, showing that the transition load for friction coefficient appears at an applied load of 247.2N. The length and volume wear rates of compound layer have been revealed to relatively constantly increase, also showing that the wear life per unit thickness of compound layer turns out to be superior as porous layer has a denser and thinner appearance. As the sliding speed increases during wear test performed by varying sliding speed at a load of 63.2N under the oil lubricating condition for medium carbon boron steel nitrocarburised in gas atmosphere, the wear rate has been found to increase, the friction coefficient to decrease and the wear life per unit thickness of compound layer to decrease considerably.

• 한국진공학회지
• /
• 제6권4호
• /
• pp.359-363
• /
• 1997

Power를 40W로 고정하고 시간을 5~120초간 변화시켜 아르곤 플라즈마로 처리시킨 n-GaAs(100)의 특성을 photoreflectance(PR) 측정으로 조사하였다. 아르곤 플라즈마 처리시 간을 증가시킴에 따라 Eo피크의 세기는 처리시간이 5초일 때 최소로 관측되었으며, 이때 표 면전기장 ($E_0$), 순수 캐리어농도(ND-NA) 및 표면상태밀도($Q_ss$)는 각각 $1.05\times10^5\textrm{V/cm},1.31\times10^{17}\textrm{cm}^{-3}$및 $1.64\times10^{-7}\textrm{C/cm}^2$로 이 값들은 bulk 시료에 비해 약 57.1, 81.4 및 56.9% 감소하였다. 반면에 5초일 때 compensation center 농도 ($N_A$)는 $5.75\times10{17}\textrm{cm}^{-3}$로 최대였다. 그리고 아르곤 플라즈마 처리시 유발된 결함들의 침투깊이는 표면에서 약450$\AA$정도였다.

• Journal of Welding and Joining
• /
• 제20권6호
• /
• pp.30-30
• /
• 2002

It has been reported that the creep characteristics on weldment which is composed of weld metal(W.M), fusion line(F.L), heat-affected zone(HAZ), and base meta(B.M) could be unpredictably changed in severe service conditions such as high temperature and high pressure. However, the studies done on creep damage in power plant components have been mostly conducted on B.M and not the creep properties of the localized microstructures in weldment have been thoroughly investigated yet. In this paper, it is investigated the creep characteristics for three microstructures like coarse-grain HAZ(CGHAZ), W.M, and B.M in X20CrMoV121 steel weldment by the small punch-creep-(SP-Creep) test using miniaturized specimen(l0×10×0.5mm). The W.M microstructure possesses the higher creep resistance and shows lower creep strain rate than the B.M and CGHAZ. In the lower creep load the highest creep strain rate is exhibited in CGHAZ, whereas in the higher creep load the B.M represents the high creep strain rate. The power law correlation for all microstructures exists between creep rate and creep load at 600℃. The values of creep load index (n) based on creep strain rate for B.M, CGHAZ, and W.M are 7.54, 4.23, and 5.06, respectively and CGHAZ which shows coarse grains owing to high welding heat has the lowest creep loade index. In all creep loads, the creep life for W.M shows the highest value.

• 한국미생물·생명공학회지
• /
• 제27권2호
• /
• pp.136-144
• /
• 1999

Since the condition of immobilization must be optimized, it is very important to know whether and on how conditions bacterial cells retain their metabolic activity during immobilization process. A bioluminescence intensity had the maximum value when cell concentrations were between 1.0 and 1.2 measured at O.D660. The strontium alginate was used as an immobilization matrix and two independent factors for immobilization of Photobacterium phosphoreum with strontium alginate were optimized with the response surface methodology(RSM) considering degree of bioluminescence. As a result, the optimum concentration for immobilization was found to be 2.4%(w/w) for sodium alginate and 0.31M for strontium chloride, respectively. A dilution was carried out with 2.5%(w/v) NaCl solution that is an optimum environmental condition for growth of P. phosphoreum. Under the such condition of immobilization, hardness could be predicted as 4.66$\times$104N/$m^2$ and it took different time according to the volume of matrix to be immobilized completely.

• Korean Membrane Journal
• /
• 제4권1호
• /
• pp.20-24
• /
• 2002

The surface of polysulfone membranes has been modified using the fluorine chemicals, ITFE (2-iodo-1,1,1-trifluoro-ethane F.W.=209.94) and PFPI (1H,1H-pentafluoro-n-propyl iodide F.W.=259.95), and PFI (1H,1H,2H,2H-perfluorohexyl iodide, F.W.=373.99) based on Friedel-Crafts reaction mechanism with varying reaction temperatures, reaction time, and catalysis types. The resulting membranes were characterized through mainly the contact angle measurement and pure water permeability. The smaller reactant shows the larger contact angles. FeBr$_3$ catalyst is more effective than AlCl$_3$. Typically, the PS film treated with ITFE at $25^{\circ}C$ under FeBr$_3$ catalyst showed the contact angle 78.5$^{\circ}C$ which indicated 10% over the value of unreacted PS films. More than 50% of pure water flux 8.0 g/$m^2$hr, reduced at reaction time 10 min relative to the original flux, 3.49 g/$m^2$hr.