• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.505-508
• /
• 1999

Conventional adaptive speed estimators cannot avoid the influence of the non-linear inductance variation under the saturation conditions. Without speed sensors, it is difficult to identify the inductance variation using a reactive power mode because the model contains a term of the rotor speed. In this paper, we propose a novel speed estimator having hybrid architecture in order to estimate both the rotor speed and the inductance variation simultaneously when the motor flux is saturated. Proposed estimator consists of the error between the flux obtained from the stator voltage equation and the flux estimated from the rotor flux observer. Introducing a new correction term into the estimator increases the estimation ability of the conventional speed estimator even though the motor flux is saturated. The convergence of the speed estimation error is examined by simulation Furthermore, the experimental results show the validity of the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1046-1048
• /
• 2004

Inductance is an important parameter determining the characteristics of current waveform in electric motors. There are many kinds of inductances, however, self and mutual inductances are the major components. These inductances are changed under the variation of the magnetic circuit, current, frequency etc., even in the same winding distribution. Therefore this paper deals with the characteristics of inductance according to the shape of stator tooth. The analysis model is newly developed motor made of SMC(Soft Magnetic Composite) to reduce the core loss in high speed. the result of this paper gives the basic understandings of inductance to extend the applications of the motors.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.208.2-208.2
• /
• 2008

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.131-134
• /
• 2001

The accurate identification of the motor parameters is crucially important to achieve high dynamic performance of induction motors. In this paper, the motor parameters such as rotor resistance, stator(rotor) leakage inductance, mutual inductance are measured for torque monitoring and indirect vector control. To demonstrate the practical significance of the results, some experimental results are presented.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권3호
• /
• pp.25-29
• /
• 2016

A quench detection system of KSTAR Poloidal Field (PF) coils is inevitable for stable operation because normal zone generates overheating during quench occurrence. Recently, new voltage quench detection method, combination of Central Difference Averaging (CDA) and Mutual Inductance Compensation (MIK) for compensating mutual inductive voltage more effectively than conventional voltage detection method, has been suggested and studied. For better performance of mutual induction cancellation by adjacent coils of CDA+MIK method for KSTAR coil system, balance coefficients of CDA must be estimated and adjusted preferentially. In this paper, the balance coefficients of CDA for KSTAR PF coils were numerically estimated. The estimated result was adopted and tested by using simulation. The CDA method adopting balance coefficients effectively eliminated mutual inductive voltage, and also it is expected to improve performance of CDA+MIK method for quench detection of KSTAR PF coils.

• 한국인터넷방송통신학회논문지
• /
• 제11권1호
• /
• pp.41-46
• /
• 2011

본 논문은 지표면 위에 설치된 전력선과 통신선 사이에 발생하는 상호 인덕턴스에 대하여 분석하였다. 임의 길이의 전력선과, 지표면 위의 터미널 효과를 고려하여 그 특성을 해석하였다. Carson의 해석법을 적용하여 상호 인덕턴스에 대한 해석적 해를 유도하였으며, 수치해석을 통하여 유도한 해의 타당성을 평가하였다. 수치해석 결과, 본 논문에서 유도한 해석적 해는 전력선과 통신선이 서로 기울어지거나 평행하게 놓여 있는 것에 상관없이 타당하였으며, 이전에 발표된 결과들과 비교 검토하였다.

• 조명전기설비학회논문지
• /
• 제27권6호
• /
• pp.23-30
• /
• 2013

This paper shows the method of winding connection and the balance of three phase of dual inverter systems used for offshore wind power generator. In order to satisfy low cost manufacturing of large scaled wind generator, the number of slot per pole per phase should be reduced. For this reason, in this research, the number is selected as '1' which is the minimum number that stator can have. Based on the prototype machine, three types of machine for the analysis are selected, and various performances especially in terms of electrically balanced condition are also investigated. Moreover, in this paper, new inductance modeling of dual 3-phase considering cross-coupling between two inverter systems is proposed. The several inductances such as mutual-, synchronous inductances are studied. By using FEA, based on calculated the flux linkage of d and q-axis, the validity of the proposed inductance modeling is confirmed.

• Journal of Magnetics
• /
• 제13권4호
• /
• pp.177-181
• /
• 2008

A very simple a.c. magnetic susceptometer for use in a helium closed cycle cryostat is reported in this paper. This simple setup has only a single bobbin-less copper coil, instead of the primary coil and two secondary coils typically used in mutual-inductance types. The single bobbin-less copper coil is directly mounted on the cryostat cold head. A sample is attached on the inside wall of the copper coil using a thermal contact material and its a.c. magnetic susceptibility is obtained from the measurement of the self-inductance of the sample coil using an LCR meter or an impedance analyzer. Experimental details are described and illustrative measurements on magnetic and superconducting materials as a function of temperature are included. The performances and limitations of this simple a.c. magnetic suceptometer are also discussed.

• Journal of Magnetics
• /
• 제2권2호
• /
• pp.55-57
• /
• 1997

A mutual-inductance bridge type ac magnetic susceptibility measurement system was built in our laboratory. With addition of a phase-sensitive prestage, it was simple to implement and provided a high signal-to-noise (S/N) ratio.

• 한국정보전자통신기술학회논문지
• /
• 제13권5호
• /
• pp.353-358
• /
• 2020

일반적인 나선형 인덕터의 경우에 비대칭 구조를 가짐에 따라 포트의 방향에 영향을 받게 된다. 본 논문에서는 단층이면서 대칭 구조를 가질 수 있는 나선형 인덕터를 제안하고 시뮬레이션 및 주파수 특성을 분석하였다. 일반적인 나선형 인덕터는 포트의 기준에 따라 주파수-인덕턴스 특성, 주파수-품질계수 특성, 자기공진주파수가 큰 차이를 보이는 반면에, 제안된 대칭 나선형 인덕터는 포트에 변함없이 2.7nH의 인덕턴스, 약 7.86의 품질계수, 약 14.1GHz의 자기공진주파수를 가진다. 이는 기존 일반적인 나선형 인덕터가 포트에 따라 큰 차이를 갖는 것과 비교하여 포트의 방향에 대한 영향이 적은 것을 확인할 수 있었다. 다만, 코일의 점유 면적에 비하여 상호 인덕턴스가 줄어들어 낮은 인덕턴스를 가지며, 인덕턴스 증가보다 코일의 저항이 더 증가하여 품질계수 또한 낮아짐을 확인할 수 있었다. 향후에는 2층 대칭 나선형 구조를 통하여 인덕턴스와 품질계수를 향상시킬 수 있을 것으로 기대된다.