• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1155-1158
• /
• 2003

In this paper, we studied on the electrical characteristics of insulation material of elastomer epoxy. As the results of test, properties of epoxy represent differently according to elastomer contents. Also, its permittivity, tan ${\delta}$ and BDV(Break-Down Voltage) strength show big difference when those compare before moisture absorption test and after moisture absorption test. From this test we find results that mush elastomer contents can cause insulation properties to degrade.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.333-336
• /
• 2002

In many cases, fuzzy modeling has a defect that the design procedure cannot be theoretically justified. To overcome this difficulty, we suggest a new design method for fuzzy model by combining genetic algorithm(GA) and mush set theory. GA, which has the advantages is optimization, and rule base. However, it is some what time consuming, so are introduce rough set theory to the rule reduction procedure. As a result, the decrease of learning time and the considerable rate of rule reduction is achieved without loss of useful information. The preposed algorithm is composed of three stages; First stage is quasi-optimization of fuzzy model using GA(coarse tuning). Next the obtained rule base is reduced by rough set concept(rule reduction). Finally we perform re-optimization of the membership functions by GA(fine tuning). To check the effectiveness of the suggested algorithm, examples for time series prediction are examined.

• 생명과학회지
• /
• 제23권11호
• /
• pp.1388-1396
• /
• 2013

본 연구는 인공재배 상황버섯 자실체 추출물인 금사목질진흙버섯 자실체 추출물의 mouse sarcoma cells인 S-180 세포에 대한 정맥 투여 시 항암 효과와 급성독성 및 4주 아 급성 독성에 대한 보고이다. 금사목질진흙버섯 자실체 추출물의 항암효과는 250 mg/kg에서 대조군 대비 42.7%의 크기로 가장 높은 효과를 나타내었으며, 농도 의존적인 경향을 나타내었다. 급성 독성에서는 $LD_{50}$치가 632.84 mg/kg (♂)과 814.48 mg/kg (♀)로 나타났으며, 이자와 장기의 무게비가 증가하는 현상이 나타나, 영향이 있는 것으로 추측되었다. 4주 아 급성 독성 시험에서 $LD_{50}$치는 355.41 mg/kg (♂)과 383.53 mg/kg (♀)로 나타났으며, 특히 250 mg/kg 투여군에서는 간의 무게 비가 2배 정도 증가하는 현상과 황색 반점이 나타났다. 특히 125 mg/kg 이상 투여군에서는 점프 능력과 민첩성 등의 운동 능력이 현저히 증가되는 현상이 관찰되었으며, 이에 대한 정확한 메카니즘은 확인할 수 없었다. 이상의 결과를 바탕으로 금사목질진흙버섯 자실체 추출물에 대한 표준물질 정제 과정을 통한 작용기전과 운동능력 향상에 대한 실험 등이 추가된다면 유효 농도에서 독성이 낮으면서도 암을 제어할 수 있는 새로운 천연물 신약의 후보 물질로 이용될 가능성이 있는 것으로 판단된다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제18권3호
• /
• pp.19-28
• /
• 2012

The purpose of this research is to suggest design direction about common space of small sized residential units for elderly housing in order to construct desirable residential environment. This research examines spatial composition and the residents' behaviors in three different types of residential units at intervals of five minutes from 9:00 a.m. to 19:00 p.m.; and analyzes the characteristics of spatial use. The following is the result. The using rate of common space is influenced by the atmosphere of residential units more than healthy condition of the elderly; furthermore, the frequency of usage is also increasing highly as mush as forming the lively atmosphere. In order to form the animated residential environment, it is necessary to provide to various activities, such as cooking, eating, watching TV, leisure, hobby, rest, etc; and the space must plan encouraging relationship with other people. Moreover, it is required to consider to each of personal characteristics ingeniously, and manage to programs extending their durability in common space of elderly housing.

• 태양에너지
• /
• 제13권2_3호
• /
• pp.53-64
• /
• 1993

본 연구는 용융된 파라핀을 채운 수직원관 내의 상변화물질의 초기온도와 수직원관의 벽면온도를 변화시켰을때 관 내에서 일어나는 열전달현상을 다루었다. 자연대류의 효과는 초기과열된 액상영역 내에서 응고초기 짧은 시간에 걸쳐 일어났고, 그 후 전도열전달이 paraffin 전 영역을 지배하였다. 실험에서 관찰한 응고 형태는 상부표면에서 밀도 증가에 의한 수축공간이 발생하였으며, 그 공간의 크기는 냉각이 진행됨에 따라 증가하였다. 자연대류가 끝나자. 상경계면 상에서 수지상 결정과 mush-zone이 발견되었다. 액상 paraffin의 초기과열은 실험 전반부의 응고질량과 응고두께를 감소시키는 경향을 보였으며, 초기액상과열도와 벽면 과냉도가 큰 경우에 크게 나타났다.

• 한국해양학회지
• /
• 제20권1호
• /
• pp.12-21
• /
• 1985

하계 동지나해에서 가장 중요한 해양학적 현상들을 재검토하였다. 계절적 수 온약층 상부 표층수는 태양가열과 주로 양자강으로 부터의 담수의 유입 그리고 하 계 계절풍에 의해 지대한 영향을 받고 있다. 수온약층 하부층에는 여러가지 해양역 학적 작용에 대한 질량장의 조정에 의해서 몇가지 분명히 구별되는 수괴들 즉 쿠로 시오 표층수, 서북태평양 중앙수, 황해저층 냉수등이 잠입되고 있다. 잠입된 황해저 층 냉수와 서북태평양 중앙수와의 전선역 혼합이 제주 남방 대륙붕상의 저층에서 일어난다. 이 혼합수는 제주 주변과 한국 남해안 중저층의 해수 특성에 커다란 영 향을 미칠 것으로 보인다.

• Journal of the Korean Wood Science and Technology
• /
• 제22권3호
• /
• pp.26-31
• /
• 1994

To provide further information for reutilization of the waste wood obtained after cultivating oak mushroom in Kangwon-do, the crystal structures of the waste wood were investigated and compared to those of normal woods by a series of x-ray diffraction analysis. The results obtained are as follows: 1. An x-ray diffraction diagram of cultivated wood for 5 years was same as that of typical cellulose with some orientation of cellulose crystallites, but that of cultivated wood for 8 years a random. 2. Crystallinity indices in normal and cultivated woods for 5 years ranged from 57% to 60%. In the cultivated wood for 8 years, however, the value showed about 40%. 3. Crystallite widths of cultivated woods for 5 years and for 8 years were 3 nm and 2.5 nm, respectively. 4. Intensity ratios of equatorial and meridional layers did not show any significant differences. From the above results, it is clear that the waste wood obtained after cultivating oak mush room for 5 years showed basically same crystal structures with normal wood. Therefore, we think that the waste wood may be used available for cellulosic material instead of normal wood.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.159-165
• /
• 2004

The shrinkages of injection molded parts are different in molding operational conditions and mold design. It also differs from resins. The shrinkages of injection molded parts for PBT (polybutylene terephthalate), PC (polycarbonate),and glass reinforced PBT and PC have been studied for various operational conditions of injection molding. The part shrinkage of crystalline polymer, PBT was higher than that of amorphous polymer, PC by about two times. The part shrinkages of both polymers decreased as glass fiber content increases. Higher Injection temperature and lower injection pressure resulted in a higher shrinkage in both PBT and PC resins. As mold temperature increases the part shrinkage of PC decreased. However, the part shrinkage of PBT increased as mold temperature increases. The part shrinkage of both PBT and PC resins decreased as gate size increases since the pressure delivery is mush easier for a larger gate size. The part shrinkage of flow direction was less than that of the perpendicular direction to the flow for both pure and glass fiber reinforced resins. The part shrinkage at the position close to the gate was less than that of the position far from the gate.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.541-546
• /
• 2000

Recently, there have been increased mush concerns about repair and rehabilitation works for aged concrete structures to keep up with rapid economic growth in Korea since the early 1970's. In particular, it is believed in these days that there are significantly increasing number of aged concrete bridge slabs, which are strongly needed to construct and rehabilitate by innovative construction method. The objective of this research is to develop the new construction method of concrete slab in bridge structure, which can contribute to minimize the traffic congestion during the repair and rehabilitation works of aged concrete slab, and can also sufficiently assure the quality through the minimization of in-situ works at the site. I-beams with punch holes, which are substituted instead of main reinforcing steels in concrete slabs, will be manufactured in accordance with the specification in the factory, and will be preassembled into the panel. After erecting the preassembled panels in the site, concrete will be poured into the slab panel. This test is to investigate physical properties of I-Beam with punch holes itself, and then to investigate structural properties of assembled I-Beam panels through static and fatigue test, of which can be utilized for the development of new construction method of concrete slab in bridge structure.

• 한국환경보건학회지
• /
• 제17권1호
• /
• pp.129-135
• /
• 1991

To investigate on the trace element content of twelve edible mushrooms and Aloe arborescens, i. e., Lentinus edodes, Ganoderma lucidum (culturing in wood and soil), Tricholoma matsutake, Agaricus bisporus, Cyrophora esculenta, Auricularia auricula-Jude (produced in Korea and China), Sarcodon asparatus, Pleurotus ostreatus, Coriolus versicolor, Smilax rotundifolia and Aloe arborescerts were analyzed by Atomic absorption spectrometer. The obtained results were summerized as follows: 1. Potassium, sodium, magnesium and iron content for the most part samples were in large quantities, especially phosphorus content of those was highest ammount for the all samples. 2. Sodium content was much ammount in the Lentinus edodes (39mg) and Ganoderma lucidurn (20 mg), Culturing in wood and soil, while potassium was very high ammount in the Aloe arborescens and other samples. Mush ammount of magnesium as compared with others was Lentinus edodes (144mg), Ganoderma lucidurn (128mg), Aloe arborescerts (50mg) and pleurotus ostreatus (60mg). Phosphorus content of Ganoderma lucidurn, Lentinus edodes, Gyrophora esculenta, Auricularia polytricha and Agaricus bisporus was much ammount while iron content of all samples equality higher ammount. Sodium content of Aloe arborescens was not analyzed out for almost all, its potassium (82mg), magnesium (50mg) and iron (18rng) content comparatively higher quentity than others minerals and phosphorus volume (4.9mg) as compared with others, was conspicuously lower detect. 4. Cadimium and lead content of harmful metal element were detected on trace quentity for the most part samples 5. Organic acids of samples i.e., Legtinus edodes, Agaricus bisporus, Pleurotus ostreatus and Ganoderma lucidum were Citrate, Malate, Fumalate, Succinate, Oxalate, Acetate, Lactate, and Tartarate and Citrate, Malate and Fumarate contents were higher amount remarkbly than other organic acids. Tartarate content was trace amount.