• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.8
• /
• pp.34-40
• /
• 1992

This paper shows a new relational formula of multiplexing gain versus variable input bit rates useful for designing Nx1 ATM(Asynchronous Transfer Mode) multiplexer which mixes several asynchronous bit streams with different transmission rates. The relation between multiplexing gain and input bit stream speeds is derived from the occupied mean lenght(the width per unit time) of cells and the occupation probability of the number of cells at an arbitrary instant when the rates of the periodic cell strams change randomly. And the relation between multiplexing gain and variable bit rates from different number of input bit streams is analyzed accordingly. Under the condition of unlimited multiplexing speed, the more number of input bit streams increases, the bigger the multiplexing gain becomes. While for the case which restricts the multiplexing speed to a limited value, the multiplexing gain becomes smaller contrarily as the number of input bit streams continues too invrease beyond a boundary value. It is shown that for designing an ATM multiplexer according to the latter case, the combination of input bit streams should be determined such as its total bit rate is lower thean, but most apprpaximate to, the multiplexed output speed. Also the general formula evaluating the most significant parameters which should be needed to design the multiplexer is derived.

• Journal of Communications and Networks
• /
• v.12 no.1
• /
• pp.11-18
• /
• 2010

Diversity-multiplexing tradeoff (DMT) is an efficient tool to measure the performance of multiple-input and multiple-output (MIMO) systems and cooperative systems. Recently, cooperative multicast system with wireless network coding stretched tremendous interesting due to that it can drastically enhance the throughput of the wireless networks. It is desirable to apply DMT to the performance analysis on the multicast system with wireless network coding. In this paper, DMT is performed at the three proposed wireless network coding protocols, i.e., non-regenerative network coding (NRNC), regenerative complex field network coding (RCNC) and regenerative Galois field network coding (RGNC). The DMT analysis shows that under the same system performance, i.e., the same diversity gain, all the three network coding protocols outperform the traditional transmission scheme without network coding in terms of multiplexing gain. Our DMT analysis also exhibits the trends of the three network coding protocols' performance when multiplexing gain is changing from the lower region to the higher region. Monte-Carlo simulations verify the prediction of DMT.

• International journal of advanced smart convergence
• /
• v.7 no.3
• /
• pp.37-43
• /
• 2018

Lattice-reduction (LR) techniques have been developed for signal detection in spatial multiplexing multiple input multiple output (MIMO) systems to obtain the largest diversity gain. Thus, an LR-assisted zero-forcing (ZF) receiver can achieve the maximum diversity gain in spatial multiplexing MIMO systems. In this paper, a simplified analysis of the achievable diversity gain is presented by fitting the channel coefficients lattice-reduced by a complex Lenstra-Lenstra-$Lov{\acute{a}}z$ (LLL) algorithm into approximated Gaussian random variables. It will be shown that the maximum diversity gain corresponding to two times the number of receive antennas can be achieved by the LR-based ZF detector. In addition, the approximated bit error rate (BER) expression is also derived. Finally, the analytical BER performance is comparatively studied with the simulated results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5C
• /
• pp.376-383
• /
• 2012

In this paper, we provide a general expression of spatial multiplexing gain (SMG) for two mutually interfering multiple-input multiple-output (MIMO) broadcast channels, referred to as MIMO-IBC, when some of user messages are made available to base stations through a common noiseless backbone line. The MIMO-IBC has two base stations and multiple users, each equipped with multiple antennas, where independent messages are transmitted over fixed channels. From the derived results, we observe the variation of the SMG with respect to the presence of a coordination as well as various antenna distributions, and compare the derived result to the SMG of the case with full cooperation among users.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.5
• /
• pp.122-130
• /
• 2008

Improving the transmission rates of multi-media delivery, such as moving pictures and internet services, has become increasingly important in modern society. To satisfy such high data rate requirements, the MIMO technique, which has the capacity to transmit large amounts of data using limited frequency resources, was developed. The Space Division Multiplexing (SDM) system is one of the MIMO techniques to be able to improve the transmission capacity. However, it is unable to achieve diversity gain because of interference due to the use of multiple antennas. In this paper, an SDM system that utilizes a Multi-Block method as an advanced transmission technique in a wireless communication system to obtain diversity gain is proposed and discussed fur the performance of the proposed system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8A
• /
• pp.601-611
• /
• 2012

In this paper, we first study the spatial multiplexing gain for the 3-cell interfering broadcast channels (IFBC) where all base stations and mobile users are equipped with multiple antennas. Then, we present the IA scheme in conjunction with user selection which outperforms the TDMA technique in the IFBC environment. The optimal scheduling method utilizes multiuser diversity to achieve a significant fraction of sum capacity by using an exhaustive search algorithm. To reduce the computational complexity, a suboptimal scheduling method is proposed based on a coordinate ascent approach.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.8
• /
• pp.35-43
• /
• 2004

An AAL2 transmission scheme is used to deliver voice and data traffic between Node-B and RNC on 3G WCDMA network. To predict performance of AAL2 multiplexing precisely, we derived analytically bandwidth gain and cell packing density using discrete-time Markov chain model for voice service and validated these results with simulation. We also performed detailed simulation for AAL2 multiplexing in a concentrator. Based on the analytical result, we propose the engineering guideline to select the optimal Timer_CU in a Node-B. We found that there is no major benefit of additional AAL2 multiplexing in a concentrator and the benefit of AAL2 switching in tub for data services is much less than that for voice service.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.61-69
• /
• 2017

The study on interference channel is very important information theoretically and many studies have been done on it. However, even in the simplest case, even in the case of two user interfering channels, the channel capacity is not yet known except in special cases. Recently, research on the multiplexing gain that shows the tendency of the transmission rate in the high signal to noise ratio (SNR) band has been actively carried out, instead of accurately grasping the channel capacity. Obtaining optimal multiplexing gain can reveal trends in channel capacity at high signal-to-noise ratio bands. In an interfering channel with two users, the best multiplexing gain can be obtained by eliminating the interference. However, recent research shows that when the number of users is more than three, the optimal multiplexing gain can not be obtained only by zero forcing and a new technique called interference sorting is needed. There are two types of interference sorting techniques. Beamforming A method of effectively separating signals and interference by properly selecting matrices and constructing structured codes using rational numbers and irrational numbers. The interference alignment technique can achieve optimal multiplexing gain in various environments such as interference channel, X channel, compound broadcast channel, and multi hop network for multi source multi destination. In recent years, it has also been applied to distributed storage. Lee et al., "Lattice Code Interference Alignment in Cooperative Multipoint Transmission (COMP) for Interference Channels of Three Users", Journal of the Institute of Electronics Engineers, vol.49-TC,no.6,2012. In this paper, the DoF of delayed channel information is obtained.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4A
• /
• pp.322-331
• /
• 2010

This paper introduces a new efficient design scheme for spatial multiplexing (SM) systems over closed loop multiple-input multiple-output (MIMO) wireless channels. Extending the orthogonalized spatial multiplexing (OSM) scheme which was developed recently for transmitting two data streams, we propose a new SM scheme where a larger number of data streams can be supported. To achieve this goal, we partition the data streams into several subblocks and execute the block-diagonalization process at the receiver. The proposed scheme still guarantees single-symbol maximum likelihood (ML) detection with small feedback information. Simulation results verify that the proposed scheme achieves a huge performance gain at a bit error rate (BER) of $10^{-4}$ over conventional closed-loop schemes based on minimum mean-square error (MSE) or bit error rate (BER) criterion. We also show that an additional 2.5dB gain can be obtained by optimizing the group selection with extra feedback information.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1757-1763
• /
• 2014

Optical wavelength division multiplexing signals of eight non-return-to-zero 10 Gb/s channels were transmitted on the long-haul link up to 720 km. The link span was composed of 80 km single mode fiber, dispersion compensation fiber for complete compensation, and EDFAs. A circulating loop method was applied to the link experiment and the loop was optimized for the transmission link. Wavelength-dependent gain variation of EDFA was compensated using EDFAs of opposite gain slopes without expensive gain flattening filters. Average OSNR was aggravated to 22 dB and the worst OSNR channel variation was 9.7 dB after the transmission. It was confirmed by analyzing optical spectra that this OSNR variation was mainly caused by the hole burning effect of EDFA.