• The KIPS Transactions:PartA
• /
• v.11A no.3
• /
• pp.109-114
• /
• 2004

Increasing popularity of WLAN and advancement of WPAN allow user to connect to the Internet easily today. The increasing of number of networking mobile device such as laptop and PDA requires computing devices to share high speed Internet line or work on networks in most cases. This has stimulated the demand of access point that supports multiple network interfaces. This paper describes the process of design, implementation and test of the wired/wireless integrated access point that supports multiple network interfaces such as wired LAN, wireless LAN, Bluetooth, and Broadband network. We designed and developed the hardware system and protocol software to integrate heterogeneous network. The system has shown compatibility with standard specification and good performance through testing with various network devices.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5377-5391
• /
• 2017

In this paper, we propose a new scheme to suppress the narrowband interference (NBI) in OFDM-based systems. The scheme utilizes code division multiple access (CDMA) and weighted-type fractional Fourier transform (WFRFT) domain preprocessing technologies. Through setting the WFRFT order, the scheme can switch into a single carrier (SC) or a multi-carrier (MC) frequency division multiple access block transmission system. The residual NBI can be eliminated to the maximum extent when the WFRFT order is selected properly. Final simulation results show that the proposed system can outperform MC and SC with CDMA and frequency domain preprocessing in terms of the narrowband interference suppression.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.9
• /
• pp.457-464
• /
• 2005

In this paper a 3D memory system that allows 17 access types at an arbitrary position is introduced. The proposed memory system is based on two main functions: memory module assignment function and address assignment function. Based on them, the memory system supports 17 access types: 13 Lines, 3 Rectangles, and 1 Hexahedron. That is, the memory system allows simultaneous access to multiple data in any access types at an arbitrary position with a constant interval. In order to allow 17 access types the memory system consists of memory module selection circuitry, data routing circuitry for READ/WRITE, and address calculation/routing circuitry In the point of view of a developer and a programmer, the memory system proposed in this paper supports easy hardware extension according to the applications and both of them to deal with it as a logical three-dimensional away In addition, multiple data in various across types can be simultaneously accessed with a constant interval. Therefore, the memory system is suitable for building systems related to ,3D applications (e.g. volume rendering and volume clipping) and a frame buffer for multi-resolution.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1420-1422
• /
• 2016

In order to guarantee the multiuser transmission performance of a chirp spread spectrum system, the cross-correlation coefficient (CCC) among multiple users should be carefully considered. In this paper, we propose a chirp rate allocation scheme for reducing the multiple access interference based on the cross-correlation coefficient. The simulation results show that the proposed scheme can improve the multiple access interference performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.7
• /
• pp.1032-1037
• /
• 2002

In this paper, derived monocycle pulse that application is possible within permission frequency band (3.1 ~ 10.6GHz) that establish in FCC. Also, PPM modulated TH IR system simulator is designed in AWGN environment. It is analyzed monocycle pulse specific property and system performance using simulator. Also, analyzed BER performances of IR system in multiple access interference environment using proposed parameters. According to result, application of possible pulse duration$(t_n)$ is very limited by 0.04~0.0326 ns in permission frequency range that establish in FCC. In the case of same pulse signal power, we could know that system performance changes by $N_s$ regardless of pulse duration. IR system that need high speed transmission more than 50 Mbps in multiple access interference environment could know that very serious performance decrease by multiple access Interference happens.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1328-1334
• /
• 2009

This paper presents a prediction mechanism of performance for an efficient interleave-division multiple access (IDMA) scheme that is being considered as 4th generation mobile radio system. The scheme is based upon log-likelihood ratio (LLR) to predict the performance of the IDMA. The conventional IDMA system simply passes the LLR values to a coarse estimation process in the receiver over a pre-defined number of iterations for an acceptable performance. The proposed IDMA system uses the LLRs to predict its BER performance and thus the iterative operation at the receiver can significantly be reduced when the performance attains an acceptable level. Performance evaluation shows that the proposed scheme of the IDMA with the LLRs used for the prediction provides a comparable BER performance. The use of the LLRs can facilitate an efficient design of the IDMA system that is a strong candidate system for 4G mobile radio systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.48-48
• /
• 2000

We developed a wireless communication system for multiple instrumentation system. The developed system has a function of remote instrumentation and PLC(Programmable Logic Controller) control. The system consists of CC(Control and Communication) protocol, wireless media access and physical media system. For multiple wireless communication, we propose a hub polling protocol based on master-slave control concept. To show the validity of the developed system, several experiments are illustrated.

• Convergence Security Journal
• /
• v.11 no.4
• /
• pp.43-49
• /
• 2011

Web-based health information provides a lot of conveniences, however the security vulnerabilities that appear in the network environment without the risk of exposure in the use of information are growing. Web-based medical information security issues when accessing only the technology advances, without attempting to seek a safe methodology are to increase the threat element. So it is required. to take advantage of web-based information security measures as a web-based access control security mechanism-based design. This paper is based on software architecture, design, ideas and health information systems were designed based on access control security mechanism. The methodologies are to derive a new design procedure, to design architecture and algorithms that make the mechanism functio n. To accomplish this goal, web-based access control for multiple patient information architecture infrastructures is needed. For this software framework to derive features that make the mechanism was derived based on the structure. The proposed system utilizes medical information, medical information when designing an application user retrieves data in real time, while ensuring integration of encrypted information under the access control algorithms, ensuring the safety management system design.

• Journal of IKEEE
• /
• v.17 no.4
• /
• pp.492-498
• /
• 2013

Recently, as Smartphone users increase, a variety of Smartphone games have been released. However, many games are just for individuals, it is not easy to find games in which people can do together. In this paper, we propose the multiple access game control system using bluetooth, which can support multiple users to do games together. The proposed system overcomes the limitation of current PC games, and also proposes a convenient way in which people can enjoy the game easily without expensive equipments such as Nintendo Wii.

• Journal of Communications and Networks
• /
• v.14 no.3
• /
• pp.273-279
• /
• 2012

In this paper, we propose an iterative interstream interference cancellation technique for system with frequency selective multiple-input multiple-output (MIMO) channel. Our method is inspired by the fact that the cancellation of the interstream interference can be regarded as a reduction in the magnitude of the interfering channel. We show that, as iteration goes on, the channel experienced by the equalizer gets close to the single input multiple output (SIMO) channel and, therefore, the proposed SIMO-like equalizer achieves improved equalization performance in terms of normalized mean square error. From simulations on downlink communications of $2{\times}2$ MIMO systems in high speed packet access universal mobile telecommunications system standard, we show that the proposed method provides substantial performance gain over the conventional receiver algorithms.