• 한국농공학회지
• /
• 제39권2호
• /
• pp.9-18
• /
• 1997

Abstract This paper presents a heuristic method for optimal design of water distribution system with multiple sources and potential links. In multiple source pipe network, supply rate at each source node affects the total cost of the system because supply rates are not uniquely determined. The Linear Minimum Cost Flow (LMCF) model may be used to a large scale pipe network with multiple sources to determine supply rate at each source node. In this study the heuristic method based on the LMCF is suggested to determine supply rate at each source node and then to optimize the given layout. The heuristic method in turn perturbs links in the longest path of the network to obtain the supply rates which make the optimal design of the pipe network. Once the best tree network is obtained, the frequency count of reconnecting links by considering link failure is in turn applied to form loop to enhance the reliability of the best tree network. A sample pipe network is employed to test the proposed method. The results show that the proposed method can yield a lower cost design than the LMCF alone and that the proposed method can be efficiently used to design irrigation systems or rural water distribution systems.

• 한국수자원학회논문집
• /
• 제44권12호
• /
• pp.1001-1013
• /
• 2011

이웃한 상수도시스템의 공급 가능지역이 중첩될 경우, 이들 시스템을 연계함으로써 경제성과 수질 조건을 만족시키는 조건별 용수공급체계를 구축하는 것이 필요하다. 용수수요 조건별 경제적 급수구역과 최적 펌프운영율을 산정하기 위하여 관망수리해석 모형(EPAnet)과 네트워크 최적화모형(KModSim)을 연계 하는 최적 네트워크모형을 개발하였다. 개발된 최적 네트워크 모형을 사등가압장, 구천댐 그리고 연초댐의 3개 상수원이 존재하는 거제지역 상수도시스템에 적용하고 2007년 운영 결과와 비교하는 방법으로 모형을 검정하였다. 최적 네트워크 모형의 적용성을 검토하기 위하여, 2011년 용수자료를 이용하여경제적급수구역변경에따른펌프운영및 수질의 적정성을평가 하였다. 평가결과본 모형은 수량, 경제성 그리고 수질을 모두 만족하는 최적해를 구하는 것으로 나타나 송배수계통간의 최적 설계 혹은 최적연계운영율을 구하기 위한 모형으로 활용이 가능하다.

• 전기의세계
• /
• 제23권3호
• /
• pp.53-59
• /
• 1974

The purpose of this paper is to use hydraulic sources optimally on the hydro-thermal power coordination in power system of Korea by means of Multiple Dynamic Programming. Four principal hydraulic power plans of Korea; Whachon, Chunchon, Uiam and Chong-pyong which are located on Han river side are treated in this research. For the illustrative purpose, a case study was made on the year round monthy optimal water control under the given load distribution and constraints.

• 멤브레인
• /
• 제30권3호
• /
• pp.190-199
• /
• 2020

2018년 환경부에서 발표된 수도정비기본계획에 따라 다양한 수자원 활용의 중요성이 증가하고 있으며, 여러 수원을 혼합하여 원수 또는 생산수로 활용하는 워터 블렌딩 방식은 미국, 호주를 비롯한 여러 나라에서 시도되고 있다. 본 연구에서는 공업용수 공급 목적으로 100,000 ㎥/일 규모 해수담수화 사업이 추진되고 있는 충남 대산 지역을 대상으로, 해수와 호소수, 침전수, 폐수 방류수 등 타 수원을 블렌딩할 때 수종 및 혼합비율에 따른 영향을 분석하였다. 타 수원 혼합비율 10~50% 조건에서 혼합수 염분농도는 약 50%까지 감소하였지만, 탁질 및 유기물 농도는 1.6~2.0배 수준으로 증가하는 것을 확인하였다. 실험실 규모 역삼투 공정 성능평가 결과, 해수의 단독활용 대비 원수 혼합 시 막오염 경향이 증가하였으며 혼합비율 10~50%에서 평균 4.1배의 플럭스 저감률을 나타내었다. 성능모사를 통한 역삼투 공정 성능분석에 따르면 혼합비율 50% 조건에서 역삼투 공정 에너지 사용량이 평균 39% 절감될 수 있을 것으로 기대되나, 운영비용 등 혼합수 활용에 대한 전반적인 영향분석을 위해서는 모형플랜트 규모에서 장기간 성능평가가 필요하다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.1388-1392
• /
• 2008

Water resources management depends on dealing inherent uncertainties stemming from climatic and hydrological inputs and models. Dealing with these uncertainties remains a challenge. Streamflow forecasts basically contain uncertainties arising from model structure and initial conditions. Recent enhancements in climate forecasting skill and hydrological modeling provide an breakthrough for delivering improved streamflow forecasts. However, little consideration has been given to methodologies that include coupling both multiple climate and multiple hydrological models, increasing the pool of streamflow forecast ensemble members and accounting for cumulative sources of uncertainty. The approach here proposes integration and coupling of global climate models (GCM), multiple regional climate models, and numerous hydrological models to improve streamflow forecasting and characterize system uncertainty through generation of ensemble forecasts.

• 한국음향학회지
• /
• 제39권5호
• /
• pp.400-405
• /
• 2020

복수의 음향유동에 의해 형성되는 유속의 분포를 해석하기 위하여 동일한 두 개의 압전진동자로 구성된 초음파 트랜스듀서에 의해 형성되는 음향유동에 대해 음원 사이의 각도에 따른 음향유동속도의 분포를 조사하였다. 거리에 따른 유체입자속도의 분포를 측정하기 위하여 물과 동일한 밀도를 갖는 표시액을 사용한 간단한 측정방법을 제안하였다. 수치해석적인 방법으로 시뮬레이션한 결과와 실험결과는 유사한 경향을 나타내었으며, 두 음원으로부터 방사된 평면파의 방사빔이 교차하는 각도에 따른 음향유동의 속도 분포의 변화를 해석할 수 있었다.

• 대한산업공학회지
• /
• 제10권2호
• /
• pp.17-27
• /
• 1984

This paper is concerned with a branched pipe network system which transports some fluids or gas from multiple sources to multiple demand nodes. A nonlinear programming model is proposed for determining junction locations simultaneously with selection of pipe sizes and pump capacities such that the capital and operating costs of the system are minimized over a given planning horizon. To solve the model, a hierarchical decomposition method is developed with the junction location being the primary variable. With some values fixed for the primary, the other decision variables are found by linear programming. Then, using the postoptimality analysis of LP, junction locations are adjusted. We repeat this process until an optimum is approached. A simple example of designing a water distribution network is solved to illustrate the optimization procedure developed.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제27권2호
• /
• pp.87-98
• /
• 2022

This study aims to prepare a technical protocol for identifying the source of nitrate in water using nitrogen (δ¹⁵N) and oxygen (δ¹⁸O) stable isotope ratios. The technical processes for nitrate sources identification are composed of site investigation, sample collection and analysis, isotope analysis, source identification using isotope characteristics, and source apportionment for multiple potential sources with the Bayesian isotope mixing model. Characteristics of various nitrate potential sources are reviewed, and their typical ranges of δ¹⁵N and δ¹⁸O are comparatively analyzed and summarized. This study also summarizes the current knowledge on the dual-isotope approach and how to correlate the field-relevant information such as land use and hydrochemical data to the nitrate source identification.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2053-2058
• /
• 2008

It was investigated thermal performances on two array types of a serial circulation and a two-way parallel circulation for six water-cooled cold plates covered with non-metallic material (polycarbonate, PC) to reduce weight of the cooling devices for humanoid robot cooling. Six cold plates attached on $10{\times}10\;mm^2$ copper base : $0.5{\times}0.5\;mm^2$ pin-finned surfaces of 1.5 mm high with 0.5 mm array spacing, was mounted on six copper heating blocks with isothermal conditions of $50{\sim}90^{\circ}C$, respectively. In order to compare thermal characteristics according to two circulation types, the surface temperatures of heating blocks and the cooling water temperatures at inlets and outlets of cold plates were measured. From the results, it was found that a two-way parallel circulation was better performance than a serial circulation in terms of total thermal resistance, total heat transfer rate, and surface temperature rises from $1^{st}$ heating block to last one for six multiple cold plates.

• 천문학회보
• /
• 제44권2호
• /
• pp.51.4-51.4
• /
• 2019

We started a systematic observational study of the 22 GHz water and 44 GHz class I methanol masers in 87 high-mass young stellar objects (HM-YSOs) as a KaVA large program (LP). The primary goal is to understand dynamical evolution of HM-YSOs and their circumstellar structures by measuring spatial distributions and 3-dimensional velocity fields of multiple maser species. In the first-year observations (2016-2017), we made snap-shot imaging surveys of 25 water and 19 methanol maser sources. In the second-year observations (2018-2019), we have carried out monitoring observations of 19 water and 3 methanol maser sources that were selected on the basis of the first-year survey results. By combining follow-up observations with VERA (distances), JVN/EAVN (6.7 GHz methanol masers), and ALMA cycles 3 and 6 (thermal lines/continuum), we will provide novel information on physical properties (density, temperature, size, mass), 3D dynamical structures of disk/jet/outflow/infalling envelope, and relationship between evolutionary of HM-YSOs. In this presentation, we will report the current status and future plans of our KaVA large program.