• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.1
• /
• pp.150-158
• /
• 2010

Filtering is necessary for the SRC(sample rate converter), that is used to change the sampling rate of a digital signal. The larger the conversion ratio of the sampling rate becomes, the more signal processing is needed for the filter, which means more complexity on realization. Thus it is important to reduce the amount of signal processing for the case of substantial conversion ratios. In this paper it is presented an efficient design method of a multistage FIR(finite impulse response) filter, with which the rate conversion occurs in stages rather than in one step. In this method, filter searching is performed exhaustively over all possible factorization of the conversion ratio, and also the filter complexity is measured based on direct realization rather than on estimation. It has been shown a designed multistage filter to have a less number of multiplications for filtering operation in comparison with a conventionally designed one. It has also been found that by allowing some variations of the filter architecture such as a halfband filter or a filter with multiple transition bands, the number of multiplications can be reduced further.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.467-472
• /
• 2005

ECG signals are recorded for diagnostic purposes in many clinical situations. Also, In order to permit good clinical interpretation, data is needed at high resolutions and sampling rates. Therefore In this paper, we designed to compression structure using multiple wavelet basis function(SWBF) and compared to single wavelet basis function(SWBF) and discrete cosine transform(DCT). For experience objectivity, Simulation was performed using the arrhythmia data with sampling frequency 360Hz, resolution lIbit at MIT-BIH database. An estimate of performance estimate evaluate the reconstruction error. Consequently compression structure using MWBF has high performance result.

• Journal of Communications and Networks
• /
• v.18 no.1
• /
• pp.27-39
• /
• 2016

This paper derives and analyzes a novel block fast Fourier transform (FFT) based joint detection algorithm. The paper compares the performance and complexity of the novel block-FFT based joint detector to that of the Cholesky based joint detector and single user detection algorithms. The novel algorithm can operate at chip rate sampling, as well as higher sampling rates. For the performance/complexity analysis, the time division duplex (TDD) mode of a wideband code division multiplex access (WCDMA) is considered. The results indicate that the performance of the fast FFT based joint detector is comparable to that of the Cholesky based joint detector, and much superior to that of single user detection algorithms. On the other hand, the complexity of the fast FFT based joint detector is significantly lower than that of the Cholesky based joint detector and less than that of the single user detection algorithms. For the Cholesky based joint detector, the approximate Cholesky decomposition is applied. Moreover, the novel method can also be applied to any generic multiple-input-multiple-output (MIMO) system.

• Journal of Communications and Networks
• /
• v.14 no.2
• /
• pp.188-194
• /
• 2012

Cognitive networks (CNs) are capable of enabling dynamic spectrum allocation, and thus constitute a promising technology for future wireless communication. Whereas, the implementation of CN will lead to the requirement of an increased energy-arrival rate, which is a significant parameter in energy harvesting design of a cognitive user (CU) device. A well-designed spectrum-sensing scheme will lower the energy-arrival rate that is required and enable CNs to self-sustain, which will also help alleviate global warming. In this paper, spectrum sensing in a multi-user cognitive ad hoc network with a wide-band spectrum is considered. Based on the prospective spectrum sensing, we classify CN operation into two modes: Distributed and centralized. In a distributed network, each CU conducts spectrum sensing for its own data transmission, while in a centralized network, there is only one cognitive cluster header which performs spectrum sensing and broadcasts its sensing results to other CUs. Thus, a wide-band spectrum that is divided into multiple sub-channels can be sensed simultaneously in a distributed manner or sequentially in a centralized manner. We consider the energy consumption for spectrum sensing only of an analog-to-digital convertor (ADC). By formulating energy consumption for spectrum sensing in terms of the sub-channel sampling rate and whole-band sensing time, the sampling rate and whole-band sensing time that are optimal for minimizing the total energy consumption within sensing reliability constraints are obtained. A power dissipation model of an ADC, which plays an important role in formulating the energy efficiency problem, is presented. Using AD9051 as an ADC example, our numerical results show that the optimal sensing parameters will achieve a reduction in the energy-arrival rate of up to 97.7% and 50% in a distributed and a centralized network, respectively, when comparing the optimal and worst-case energy consumption for given system settings.

• Journal of the Korean Society for Library and Information Science
• /
• v.40 no.2
• /
• pp.217-242
• /
• 2006

This Study reviewed 86 research articles using inferential statistics published in 2001-2004 in 4 korean core journals in the field of library and information science. Sampling methods, response rates and nonresponse bias, reliability test, and inferential statistic techniques used in the articles were critically reviewed and analyzed. Nonprobability sampling was mostly used. Average response rate was 74.47%. Parametric statistics were mostly used. Some misunderstandings in using each inferential statistics, especially Reliability Test, Multiple Regression, Factor Analysis, MDS, etc. were reported in this study.

• The Korean Journal of Applied Statistics
• /
• v.23 no.5
• /
• pp.923-932
• /
• 2010

One of the problems in designing the fifth Korean National Health and Nutrition Examination Survey(KNHNES) is the lack of an appropriate sampling frame. Due to the significant time difference, we expect eight severe sampling frame errors if we use the sampling frame obtained from the latest population and housing census that was conducted in 2005. Thus, the construction of an appropriate sampling frame for the fifth KNHNES is crucial for a successful survey. We considered the construction of a sampling frame that overcomes the limitations of the 2005 population and housing census based frame. For the construction of eight new sampling frames, we considered the use of multiple sampling frames in which the frame for the apartment households and the frame for the general households are obtained from different sources.

• Journal of Nutrition and Health
• /
• v.35 no.2
• /
• pp.263-271
• /
• 2002

The purpose of this study was to determine the standard work time of dietetic staff through work sampling methodology in school flood service systems. Work measurement through work sampling methodology was conducted in five conventional, five commissary and five joint management flood service systems over two consecutive weeks in October 1999. Statistical analysis was performed on the SAS/Win 6.12 package program for Kruskal-Wallis test and multiple comparison. Observed data were satisfied with a confidence level of 95% and a confidence interval of $\pm$ 0.05. The results of this study can be summarized as follows. The actual time spent by dietetic staff members in conventional, commissary, joint-management flood servile systems was 2,394, 2,521 and 2,110 minutes per week, respectively. Transportation time of each flood service systeml and ILO allowance rate (11%) was applied. Thus, the standard work time per week of dietetic staff members in conventional, commissary, joint-management flood service systems was 2,746.14, 2,861.58 and 2,520.81 minutes, respectively. The standardized index was 1.04, 1.08 and 0.95 men in conventional, commissary, and joint-management flood service systems, respectively. Regardless of the school flood service system, those with "the duty of cooking and distribution management" had the longest labor time, while those with "duty of nutritional education" had the shortest labor time.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.1743-1753
• /
• 2017

Since there are multiple random variables in the probabilistic load flow (PLF) calculation of distribution system containing distributed generation (DG) and electric vehicle charging load (EVCL), a Monte Carlo method based on composite sampling method is put forward according to the existing simple random sampling Monte Carlo simulation method (SRS-MCSM) to perform probabilistic assessment analysis of voltage quality of distribution system containing DG and EVCL. This method considers not only the randomness of wind speed and light intensity as well as the uncertainty of basic load and EVCL, but also other stochastic disturbances, such as the failure rate of the transmission line. According to the different characteristics of random factors, different sampling methods are applied. Simulation results on IEEE9 bus system and IEEE34 bus system demonstrates the validity, accuracy, rapidity and practicability of the proposed method. In contrast to the SRS-MCSM, the proposed method is of higher computational efficiency and better simulation accuracy. The variation of nodal voltages for distribution system before and after connecting DG and EVCL is compared and analyzed, especially the voltage fluctuation of the grid-connected point of DG and EVCL.

• Journal of radiological science and technology
• /
• v.46 no.5
• /
• pp.417-425
• /
• 2023

The glomerular filtration rate (GFR) has been the subject of much research as a key indicator for diagnosing, treating, and monitoring kidney function. The gamma camera method (Gates method) is simple and allows simultaneous acquisition of GFR and renal scintigraphy for each kidney, however its accuracy is inferior. This study aimed to investigate changes in GFR depending on how region of interest (ROI) are set up, which is one of many factors influencing accuracy. GFR was calculated by setting the ROI for each phase of the image acquisition time (Gates-1: 0~1 minutes, Gates-2: 1~3 minutes, Gates-3: 3~27 minutes), and statistical significance was verified based on probability value 0.05 through ANOVA analysis. While there was no statistically significant difference among results from Gates-1, 2, 3 (p=0.481>0.05), overall results from the Gates method tended to overestimate compared to those from the multiple blood sampling-dual exponential (MBSDE) method. When comparing averages between phases, results from Gates-2 were most similar to those from the MBSDE method. Moreover, paired t-test p-values between MBSDE method and phases were as follows Gates-1: 0.021 (p<0.05), Gates-2: 0.280 (p>0.05), and Gates-3: 0.164 (p>0.05) indicating that only Gates-1 had statistically significant differences compared with MBSDE method. Thus, setting ROI around 2~3 minutes is calculated can aid in accurately determining GFR when Gates Method.

• Journal of Preventive Medicine and Public Health
• /
• v.19 no.2 s.20
• /
• pp.293-306
• /
• 1986

A Health Interview Survey at Chuncheon city was conducted to assess level of illness by stratified random sampling method. Sample size was 6,007 and the prevalence of illness in period of 15 days was studied. 1) Prevalence rate of illness among Chuncheon citizen was 20.8 percent, and that of acute condition was 10.8 percent and chronic condition, 10.0 percent. 2) There was significant difference in prevalence rate by sex, especially the prevalence rate of chronic illness. 3) High positive correlation was noted between aging and prevalence rate of chronic illness. But negative correlation was noted in case of acute illness. 4) Multiple regression analysis on morbid state by socioeconomic variables was not seen to be appropriate for this survey, especially the analysis of acute illness. 5) Estimation of anual prevalence rate could not be possible because of seasonal variation of disease prevalence.