• Design & Manufacturing
• /
• v.9 no.3
• /
• pp.14-18
• /
• 2015

Although demand for non-metalic materials, acrylic and metal plate material is increased. The complex processing equipment that can machine it at the same time is extremely limited. In case of existing manual multiple routers, it is no substantial demand due to the difficulty in use and low efficiency. In this study, the CNC multiple router was designed. The structural analysis was carried out according to the structure of the bed as a basic step for the development of multiple CNC router system that can guarantee the increase in yield while optimizing the manufacturing process. CNC router added a dummy was carried out about weight analysis and load analysis. Development of a CNC router system will be progressed on the basis of the analysis result.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1203-1207
• /
• 2019

As the number of IP cores has been increasing in a System-on-Chip (SoC), multiple routers are included in on-chip-networks. Each router has its own arbitration policy and it is difficult to obtain a desired arbitration result by combining multiple routers. Allocating desired bandwidths to the ports across the routers is more difficult. In this paper, a guaranteed bandwidth allocation scheme using an IP-level QoS control is proposed to overcome the limitations of existing local arbitration policies. Each IP can control the priority of a packet depending on the data communication requirement within the allocated bandwidth. The experimental results show that the proposed mechanism guarantees for IPs to utilize the allocated bandwidth in multiple router on-chip-networks. The maximum error rate of bandwidth allocation of the proposed scheme is only 1.9%.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.279-282
• /
• 2007

Typically a wireless sensor network consists of a number of nodes that sense surrounding environment and collaboratively work to process and route the sensing data to a sink or gateway node. We propose an architecture with support of multiple routers in IPv6-based Low-power Wireless Personal Area Network (6LoWPAN). Our architecture provides traffic load balancing and increases network lifetime as well as self-healing mechanism so that in case of a router failure the network still can remain operational. Each router sends its own Router Advertisement message to nodes and all the nodes receiving the messages can select which router is the best router with the minimum hop-count and link information. We have implemented the architecture and assert our architecture helps in traffic load balancing and reducing data transmission delay for 6LoWPAN.

• Journal of KIISE:Information Networking
• /
• v.35 no.5
• /
• pp.384-394
• /
• 2008

A wireless router is a device which allows several wireless clients to share an internet line using NAT (Network Address Translation). In a school or a small office environment where many clients use multiple wireless routers, a client may select anyone of wireless routers so that most clients can be clustered to a small set of the wireless routers. In such a case, there exists load unbalancing problem between clients and wireless routers. One of its result is that clients using the busiest router get poor service. The other is that the resource utilization of the whole wireless routers becomes very low. In order to resolve the problems, we propose a load sharing scheme to maximize network bandwidth utilization based on multiple SSID. In a time internal, the proposed scheme keeps to show the available bandwidth information of all the possible wireless routers to clients through multiple SSID. A new client can select the most available band with router. This scheme allows to achieve a good load balancing between clients and routers in terms of bandwidth utilization. We implemented the proposed scheme with ASUS WL 500G wireless router and performed experiments. Experimental results show the bandwidth utilization improvement compared to the existing method.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.8 s.350
• /
• pp.25-34
• /
• 2006

In this paper DynaMoNET is suggested as a novel IPv6-based multi-homed mobile network architecture which is composed of nested mobile ad hoc networks dynamically coming together through wireless personal area networks. Each ad hoc network has a mobile router which may work as a root mobile router instead of fixed mobile routers in a DynaMoNET. A root mobile router provides the reliable Internet connectivity for the entire mobile network. This paper includes a innovative handover protocol for multi-homed mobile networks, network switchover algorithm considering multiple decision factors, root mobile router election process based on token-based algorithm fast root mobile router discovery algorithm and fault avoidance mechanism to support reliable Internet connectivity. Finally the system architecture of a mobile router is given in detail.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.788-791
• /
• 2004

This paper presents a general description of single and dual contact tooling systems, finite element analysis, and discussions on the application of the system to the 5-head router machine which is in particular for aerospace components. This study has been performed as part of the development of the new generation 5-head router machine which is designed for high productivity. Such high productivity in essence requires high speed rotation and multiple spindles in one machine. The high speed rotation may exceed a range in a conventional single contact tooling system. The conventional tooling system is reevaluated in comparison with the dual-contact system. Finite element analysis using simplified spindle models compares major differences in the two systems. Some problems in the application to the 5-head router machine are discussed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.5
• /
• pp.1035-1040
• /
• 2009

We propose a new encoder/decoders based on an tune able wavelength converter(TWC) and an arrayed waveguide grating(AWG) router for large capacity optical CDMA networks. The proposed encoder/decoder treats codewords of wavelength/time 2-D code simultaneously using the dynamic code allocation property of the TWC and the cyclic property of the AWG router, and multiple subscribers can share the encoder/decoder in networks. Feasibility of the structure of the proposed encoder/decoder for dynamic code allocation is tested through simulations using two wavelength/time 2-D codes, which are the generalized multi-wavelength prime code(GMWPC) and the generalized multi-wavelength Reed-Solomon code(GMWRSC). Test results show that the proposed encoder/decoder can increase the channel efficiency not only by increasing the number of simultaneous users without any multiple-access interference but by using a relatively short length CDMA codes.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.11 no.4
• /
• pp.9-17
• /
• 2007

Network Mobility basic support protocol (NEMO Basic) extends the operation of Mobile IPv6 to provide uninterrupted Internet connectivity to the communicating nodes of mobile networks. The protocol uses a mobile router (MR) in the mobile network to perform prefix scope binding updates with its home agent (HA) to establish a bi-directional tunnel between the HA and MR. This solution reduces location-update signaling by making network movements transparent to the mobile nodes (MNs) behind the MR. However, delays in data delivery and higher overheads are likely to occur because of sub-optimal routing and multiple encapsulation of data packets. To manage the mobility of the mobile network, it is important to minimize packet overhead, to optimize routing, and to reduce the volume of handoff signals over the nested mobile network. This paper proposes en aggregate router-assisted route optimization (ARARO) scheme for nested mobile networks support which introduces a local anchor router in order to localize handoff and to optimize routing. With ARARO, a mobile network node (MNN) behind a MR performs route optimization with a correspondent node (CN) as the MR sends a binding update message (BU) to aggregate router (AGR) via root-MR on behalf of all active MNNs when the mobile network moves. This paper describes the new architecture and mechanisms and provides simulation results which indicate that our proposal reduces transmission delay, handoff latency and signaling overhead. To evaluate the scheme, we present the results of simulation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.116-124
• /
• 2011

For Binary CDMA network, communication can be accomplished only within a Pico-net on the boundary of management by the master station because it manages network resources of each entity. In this research, we try to overcome these limits and extend the application for Binary CDMA system to broad-band network. We suggest a new Binary CDMA router such that network is devised by cell unit and multiple Pico-net and a unique address is assigned to each Pico-cell to relaying data between Pico-cells.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.4
• /
• pp.833-838
• /
• 2014

Recently the use router is to allow multiple computers by one IP can be connect to the Internet. Also, the PC or server in order to use a Web server or a print server, Web Hard, P2P should be settings. In this paper, we are building a multi-functional Web server that using a router supported OpenWRT based on network settings and firewall settings and a variety of services. A web server can be provided the Internet phone and secure multimedia service Web server router based OpenWRT may be provided through a mobile app and the PC application service.