• 한국터널지하공간학회 논문집
• /
• 제23권3호
• /
• pp.151-165
• /
• 2021

차수 및 보강을 목적으로 암반 내 수행되는 그라우팅은 여러가지 이유로 어려운 작업공정 이므로 세밀하게 수행되어야 한다. 가시적으로 확인이 불가능한 불연속면의 틈 사이로 주입되는 그라우트의 주입거동을 최적화 하면서 지반조건에 대응하는 주입방법의 도출이 필요하다. 본 연구에서는 주입압과 주입재 체적의 곱인 GIN (Grouting Intensity Number)를 보완하여 JRC에 따른 주입압의 감소 현상 및 주입압력으로 인한 절리의 열림 현상을 고려한 수정 GIN 기법을 제안하였다. 해당 방법에 대한 검증을 위하여 현장시험을 수행하였으며 지반조건에 대응하는 GIN의 산정 및 주입압과 주입양의 제어를 통해서 GIN의 한계를 준용하여 주입을 수행하였다. 그 결과 합리적인 그라우팅 작업의 수행이 가능하였으며 지반의 투수계수 또한 10^-1~10^-2 cm/sec 수준의 저감을 보였다.

• 대한간호학회지
• /
• 제51권4호
• /
• pp.414-429
• /
• 2021

Purpose: This systematic review and meta-analysis analyzed the effects of 2% chlorhexidine bathing on the incidence of hospital-acquired infection (HAI) and multidrug-resistant organisms (MDRO) in adult intensive care units. Methods: PubMed, CINAHL, Cochrane library, and RISS database were systematically searched, and 12 randomized studies were included in the analysis. Comprehensive Meta-Analysis version 3.0 was used to calculate the effect size using the odds ratio (OR) and a 95% confidence interval (CI). Subgroup analysis was performed according to the specific infection and intervention types. Results: In general, 2% chlorhexidine bathing has a significant effect on the incidence of HAI (OR, 0.59; 95% CI, 0.40~0.86) and MDRO (OR, 0.52; 95% CI, 0.34~0.79). Subgroup analyses show 2% chlorhexidine bathing is effective in bloodstream infections (OR, 0.51; 95% CI, 0.39~0.66) but not for urinary tract infections, ventilator-associated pneumonia infections, and Clostridium difficile infections. Moreover, 2% chlorhexidine bathing alone or its combination with other interventions has a significant effect on the incidence of HAI and MDRO (OR, 0.59; 95% CI, 0.38~0.92). Conclusion: This meta-analysis reveals that 2% chlorhexidine bathing significantly reduces the incidence of HAI and MDRO in intensive care units. The effect of 2% chlorhexidine bathing on pediatric patients or patients at general wards should be further assessed as a cost-effective intervention for infection control.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• 제33권2호
• /
• pp.35-40
• /
• 2022

Objectives: Restricted and repetitive behaviors (RRBs) are a core symptom in the diagnosis of autism spectrum disorder (ASD). The complexity of behavioral patterns has called for the creation of phenotypically homogeneous subgroups among individuals with ASD. The purpose of this study was 1) to investigate the different types of RRBs and 2) to explore whether subgroups created by RRBs would show unique levels of functioning in toddlers and young children with ASD. Methods: A total of 313 children with ASD, aged 12-42 months were included in the analysis. The Autism Diagnostic Interview-Revised was used to obtain information on the different types of RRBs by grouping 15 items into six categories. The Vineland Adaptive Behaviors Scale, a parent-reported questionnaire, was used to measure adaptive functioning. A portion of the children were analyzed separately for verbal-related RRBs based on their expressive language level. Two-step cluster analysis using RRB groups as features was used to create subgroups. Analysis of covariance while covarying for age and language was performed to explore the clinical characteristics of each cluster group. Results: Sensory-related RRBs were the most prevalent, followed by circumscribed interests, interest in objects, resistance to change, and repetitive body movements. A subset of the children was analyzed separately to explore verbal-related RRBs. Four cluster groups were created based on reported RRBs, with multiple RRBs demonstrating significant delays in adaptive functioning. Conclusion: Heterogeneity of RRBs emerges at a young age. The different patterns of RRBs can be used as valuable information to determine developmental trajectories with better implications for treatment approaches.

• Journal of the Korean Wood Science and Technology
• /
• 제50권4호
• /
• pp.219-236
• /
• 2022

Wood-based nanocomposite electrode materials were synthesized for application in supercapacitors by mixing nanostructured hematite (Fe₂O₃) with highly porous activated carbon (AC) produced from the wood-waste of Pinus roxburghii. The AC was characterized using various instrumental techniques and the results showed admirable electrochemical properties, such as high surface area and reasonable porosity. Firstly, AC was tested as an electrode material for supercapacitors and it showed a specific capacitance of 59.02 Fg^-1 at a current density of 1 Ag^-1, cycle life of 84.2% after 1,000 cycles (at a current density of 3 Ag^-1), and energy density of 5.1 Wh/kg at a power density of 135 Wkg^-1. However, when the AC was composited with different ratios of Fe₂O₃ (1:1, 2:1, and 1:2), there was an overall improvement in its electrochemical performance. Among the 3 ratios, 2:1 (AC:Fe₂O₃) had the best specific capacitance of 102.42 Fg^-1 at 1 Ag^-1, cycle life of 94.4% capacitance after 1,000 cycles (at a current density of 3 Ag^-1), and energy density of 8.34 Wh/kg at a power density of 395.15 Wkg^-1 in 6 M KOH electrolyte in a 3-electrode experimental setup with a high working voltage of 1.55 V. Furthermore, when Fe₂O₃ was doubled, 1:2 (AC:Fe₂O₃), the electrochemical capacitive performance of the electrode twisted and deteriorated due to either the accumulation of Fe₂O₃ particles within the composite or higher bulk resistance value of pure Fe₂O₃.

• 한국산업융합학회 논문집
• /
• 제25권4_2호
• /
• pp.655-662
• /
• 2022

Recently, with the increase in the use of UAV(unmanned aerial vehicles), research on horizontal maintenance stations that can take off and land in various environments has been actively conducted. These stations can safely land UAV through multiple DOF(degrees of freedom) or at least 2-DOF-based actuator actuation. Among them, many researchers are dealing with the multi-DOF stewart platform due to its high safety. However, the stewart platform requires high-precision control technology because it requires a lot of torque to actuate according to the load action. Therefore, in this paper, to solve the mentioned problem, a bevel gear-based 2-DOF horizontal maintenance station system is proposed. The proposed system is configured to prevent damage due to air resistance when maintaining ships and to install it in a small space. Also, in terms of system configuration, the bevel gear-based horizontal maintenance system has the main advantage of being able to take off and land UAVs of various sizes through the replacement of station pads. The driving of the system consists of a simple form that can control the motor by adjusting the rotation speed of the motor according to the sea waveform.

• 한국기계가공학회지
• /
• 제21권5호
• /
• pp.9-15
• /
• 2022

Discarded bio-wastes, such as seeds and rinds, cause environmental problems. Multiple studies have recycled bio-wastes as eco-friendly energy sources to solve these problems. This study uses bio-waste to fabricate a mandarin peel powder based triboelectric nanogenerator (MPP-TENG). The MPP-TENG is based on the contact separation mode. It generates an open-circuit voltage and short-circuit current of 156V and 2µA, respectively. In addition, MPP-TENG shows stable operation over continuous 3000s without any deviation in output. Also, the device exhibits maximum power density of 5.3㎼/cm² when connected to a resistance of 100MΩ. In an energy storage capacity test for 1000s, the MPP-TENG stores an energy of 171.6µJ in a 4.7µF capacitor. The MPP-TENG can power 9 blue LEDs and 54 green lettering LEDs. These results confirm that the MPP-TENG can provide a new avenue for eco-friendly energy harvesting device fabrication.

• Steel and Composite Structures
• /
• 제45권3호
• /
• pp.409-423
• /
• 2022

Nowadays, there is a high demand for great structural implementation and multifunctionality with excellent mechanical properties. The porous structures reinforced by graphene platelets (GPLs) having valuable properties, such as heat resistance, lightweight, and excellent energy absorption, have been considerably used in different engineering implementations. However, stiffness of porous structures reduces significantly, due to the internal cavities, by adding GPLs into porous medium, effective mechanical properties of the porous structure considerably enhance. This paper is relating to vibration analysis of fluidconveying cantilever porous graphene platelet reinforced (GPLR) pipe with fractional viscoelastic model resting on foundations. A dynamical model of cantilever porous GPLR pipes conveying fluid and resting on a foundation is proposed, and the vibration, natural frequencies and primary resonant of such a system are explored. The pipe body is considered to be composed of GPLR viscoelastic polymeric pipe with porosity in which Halpin-Tsai scheme in conjunction with the fractional viscoelastic model is used to govern the construction relation of nanocomposite pipe. Three different porosity distributions through the pipe thickness are introduced. The harmonic concentrated force is also applied to the pipe and the excitation frequency is close to the first natural frequency. The governing equation for transverse motions of the pipe is derived by the Hamilton principle and then discretized by the Galerkin procedure. In order to obtain the frequency-response equation, the differential equation is solved with the assumption of small displacement, damping coefficient, and excitation amplitude by the multiple scale method. A parametric sensitivity analysis is carried out to reveal the influence of different parameters, such as nanocomposite pipe properties, fluid velocity and nonlinear viscoelastic foundation coefficients, on the primary resonance and linear natural frequency. Results indicate that the GPLs weight fraction porosity coefficient, fractional derivative order and the retardation time have substantial influences on the dynamic response of the system.

• Restorative Dentistry and Endodontics
• /
• 제46권2호
• /
• pp.16.1-16.11
• /
• 2021

Objectives: The aim of this study was to evaluate the shaping ability of the TruShape and Reciproc Blue systems and the apical extrusion of debris after root canal instrumentation. The ProTaper Universal system was used as a reference for comparison. Materials and Methods: Thirty-three mandibular premolars with a single canal were scanned using micro-computed tomography and were matched into 3 groups (n = 11) according to the instrumentation system: TruShape, Reciproc Blue and ProTaper Universal. The teeth were accessed and mounted in an apparatus with agarose gel, which simulated apical resistance provided by the periapical tissue and enabled the collection of apically extruded debris. During root canal preparation, 2.5% sodium hypochlorite was used as an irrigant. The samples were scanned again after instrumentation. The percentage of unprepared area, removed dentin, and volume of apically extruded debris were analyzed. The data were analyzed using 1-way analysis of variance and the Tukey test for multiple comparisons at a 5% significance level. Results: No significant differences in the percentage of unprepared area were observed among the systems (p > 0.05). ProTaper Universal presented a higher percentage of dentin removal than the TruShape and Reciproc Blue systems (p < 0.05). The systems produced similar volumes of apically extruded debris (p > 0.05). Conclusions: All systems caused apically extruded debris, without any significant differences among them. TruShape, Reciproc Blue, and ProTaper Universal presented similar percentages of unprepared area after root canal instrumentation; however, ProTaper Universal was associated with higher dentin removal than the other systems.

• 운동과학
• /
• 제28권1호
• /
• pp.82-90
• /
• 2019

PURPOSE: The purpose of this study was to examine the association of waist to height ratio (WHtR) and resting heart rate (RHR) with cardio-metabolic risk factors among Korean postmenopausal women. METHODS: A cross-sectional analysis was performed using the 2015 Korea National Health and Nutrition Examination Survey. The analysis included a total of 1,540 postmenopausal women. RESULTS: Individuals with higher WHtR (>0.56) showed significantly higher glucose, triglyceride, insulin, Homeostatic Model Assessment for Insulin resistance (HOMA-IR), total cholesterol, systolic and diastolic blood pressure compared with ones with lower WHtR (≤0.51). Similar findings were found in those with higher RHR (≥90 bpm) compared with ones with lower RHR (<60 bpm) for glucose and HOMA-IR. When determining the combined effects of WHtR and RHR on the prevalence of metabolic syndrome, individual with WHtR above 0.5 and RHR above 80 bpm showed 10.39 times higher prevalence of metabolic syndrome compared with those with WHtR below 0.5 and RHR below 70 bpm. We further performed multiple linear regression analysis to understand how WHtR and RHR contribute to fasting glucose, and found that both WHtR and RHR contribute to fasting glucose levels independent of age, education level, marital status and income level. CONCLUSIONS: The current study showed that the WHtR and RHR are associated with cardio-metabolic risk factor and prevalence of metabolic syndrome in Korean postmenopausal women.

• 한국정보전자통신기술학회논문지
• /
• 제16권5호
• /
• pp.223-229
• /
• 2023

본 논문에서는 벡터제어 기법을 적용하는 교류 전동기 PI(비례-적분) 전류제어를 위한 주요 시스템 파라미터를 측정하는 방법을 제시한다. 전류제어를 위해서 PI 제어입력은 여러 선택적 방법에 의해 튜닝될 수 있다. 그 여러 방법들 중에서 주요 계통 파라미터인 권선 저항과 인덕턴스를 이용하는 방법이 빈번히 사용된다. 본 연구에서는 단순 궤환 제어의 결과들을 통해서 이 두 파라미터를 분석, 계측하는 기법을 제시한다. 이 분석적 측정 방법은 단위 계단 또는 다중 계단 기준 명령에 대해 단순 비례 궤환 이득을 이용하는 P 제어의 출력들을 분석하여 단계적으로 파라미터들을 계측해 내는 방법이다. 이 기법은 실시간적인 해석적 계측 방법으로 추가 계측 회로들 및 복잡한 계측 알고리즘들을 사용하지 않고 교류전동기의 벡터제어를 위한 토크성분과 자속성분 전류 제어이득을 같이 연산할 수 있는 방법이다.