• ETRI Journal
• /
• v.35 no.6
• /
• pp.1148-1151
• /
• 2013

We propose a way to measure the absorber reflectivity at a low cost. Only one simple antenna with a small radiating aperture and a frequency-domain instrument are utilized. The previously used equation for calculating the reflectivity of an absorber is inaccurate, and, therefore, a new equation is derived based on multiple reflection analysis and three test models. Notably, the reflection coefficient of the antenna is included in the derived equation. The accuracy of the proposed method is proven through simulation and measurements. It can be easily applied to a product examination by absorber manufacturers and customers owing to its advantages of simplicity, cost effectiveness, and non-cutting examination.

• Journal of KIISE:Software and Applications
• /
• v.37 no.2
• /
• pp.104-109
• /
• 2010

The lighting reflection is a common problem in image analysis and causes the many difficulties to extract distinct features in related fields. Furthermore, the problem grows in the rainy night. In this paper, we aim to remove light reflection effects and reconstruct a road surface without lighting reflections in order to extract distinct features. The proposed method utilizes a 3D analysis based on a multiple geometry using captured images, with which we can combine each reflected areas; that is, we can remove lighting reflection effects and reconstruct the surface. At first, the regions of lighting sources and reflected surfaces are extracted by local maxima based on vertically projected intensity-histograms. After that, a fundamental matrix and homography matrix among multiple images are calculated by corresponding points in each image. Finally, we combine each surface by selecting minimum value among multiple images and replace it on a target image. The proposed method can reduces lighting reflection effects and the property on the surface is not lost. While the experimental results with collected data shows plausible performance comparing to the speed, reflection-overlapping areas which can not be reconstructed remain in the result. In order to solve this problem, a new reflection model needs to be constructed.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.4
• /
• pp.445-450
• /
• 2007

An optimum design process of the broad-band multi-layered radar absorbing material, using genetic algorithm, is established for the radar cross section reduction of a complex target, which consists of multiple reflection structures, such as surface warships. It follows the successive process of radar cross section analysis, scattering center analysis, radar absorbing material design, and reanalysis of radar cross section after applying the radar absorbing material. It is demonstrated that it is very effective even in the optimum design of the multi-layer radar absorbing material. This results from the fact that the three factors, i.e.. the incident angle range, broad-band frequencies, and maximum thickness can be simultaneously taken into account by adopting the genetic algorithm.

• ETRI Journal
• /
• v.34 no.6
• /
• pp.954-957
• /
• 2012

Titanium foils for use in photoelectrochemical devices are treated with a $HNO_3$-HF solution. After this treatment, the optical reflection characteristics of the Ti substrates are markedly increased in terms of not only reflectivity but also optimized wavelength. Furthermore, the "multiple beam interference" theory and optical analysis of surface morphologies clearly verify the origin of the optimized optical reflection properties.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.4
• /
• pp.257-264
• /
• 2002

This paper is concerned with the analysis of wave reflection and transmission from multiple floating breakwaters. Linear potential theory was used for modeling wave field, and the behaviors of the floating breakwaters was represented as linearized equation of motions. The boundary value problem for the wave field was discretized by Galerkin technique. The radiation condition at infinity was modeled as infinite elements developed by Park et al.(1991). The validation of the developed model was given through the comparison with hydraulic experimental data conducted by Park et al.(2000). The possibility for the application of multiple floating breakwaters was also discussed based on the numerical experiments.

• Journal of East-West Nursing Research
• /
• v.26 no.2
• /
• pp.176-184
• /
• 2020

Purpose: The purpose of this study was to investigate the influence of nursing students' self-reflection and insight, and academic selfefficacy on their clinical reasoning competence. Methods: Data were collected from 147 third- and fourth-year nursing students who had more than 6 months of clinical training experience. Clinical reasoning competence, self-reflection and insight, and academic self-efficacy were measured using self-reported questionnaires. Data analysis was conducted with IBM SPSS 25.0 using one-way ANOVA, independent t-test, Pearson correlation coefficient, and multiple regression analysis. Results: Clinical reasoning competence was positively correlated with self-reflection and insight (r=.24, p=.003) and academic self-efficacy (r=.30, p<.001). Academic self-efficacy (β=.23, p=.011), dissatisfaction with major (β=-.17, p=.034), and 5~8 case studies (β=-.39, p=.027) were identified as factors influencing clinical reasoning competence (adjusted R²=.15). Conclusion: To improve the clinical reasoning competence of nursing students, it is necessary to develop the academic self-efficacy of complex cases and provide critical inquiries, debriefing tailored to clinical reasoning, and sufficient reflection during clinical and simulation practice.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.3
• /
• pp.217-224
• /
• 2003

In this study, the adaptive triangular beam method(ATBM) considering different sound reflection coefficients and angles of a triangular beam on two or more planes as well as diffraction effect is suggested. The ATBM, subdividing a tracing triangular beam into multiple triangular beams on reflection planes, gives reliable and convergent sound-field analysis results without the dependancy on the number of initial triangular beam segmentation to search sound propagation paths from source to receiver. The validity of the method is verified by the comparison of numerical and experimental results for energy decay curve and steady-state sound pressure level of rooms having direct, reflective and diffractive sound paths.

• Near Infrared Analysis
• /
• v.1 no.1
• /
• pp.37-41
• /
• 2000

The purpose of this research was to develop a the reflection technique with near infrared (NIR) radiation for estimating soil components. NIR reflectance was scanned at 2nm intervals from 1100 to 2500nm with an InfraAlyzer 500 (Bran & Luebbe Co.). Over 400 soil sample from fields of different crops and land-use over Youngnam and Honam regions were used to obtain mean diffuse reflection of the soil for the calibration and validation of the calibration set in estimating moisture, organic matter (OM) and total nitrogen (T-N) of the soils. Multiple linear regression (MLR) was used to evaluate the correlation of NIR spectroscopy method. Reflection pattern of NIR spectra for finely sized sample (<0.5mm) and coarsely sized soil(<2mm) did not show much difference. The results showed that NIR spectroscopy and coarsely sized soil (<2mm) did not show much difference. The results showed that NIR spectroscopy could be used as a routine soil testing method in estimating OM, moisture, T-N in soil samples simultaneously.

• Near Infrared Analysis
• /
• v.1 no.2
• /
• pp.35-39
• /
• 2000

The purpose of this research was to find out suitable soil sample preparation and sample holding tools for NIR reflection radiation for estimating soil components. NIR reflectance was scanned at 2nm intervals from 1,100 to 2,500nm with an InfraAlyzer 500(Bran+Luebbe Co.). Coarse(2.0mm) and fine(0.5mm) soil sample and various sample holding tools were used to obtain mean diffuse reflection of the soil for the calibration and validation of the calibration set in estimating moisture, organic matter and total nitrogen of the soils. Multiple linear regression was used to obtain the best correlation of NIR spectroscopy method. Correlation of NIR spectroscopy method. Correlation of NIR spectra for finely and coarsely sized soil did not show much difference. The standard errors of prediction(SE) using different types of sample holding tools for organic matter, total nitrogen and soil moisture were better than 0.765, 0.041 and 0.63% respectively. From the results it can be concluded that NIR spectroscopy with flow type cell could be used as a fast routine testing method in quantitative determination of organic matter, total nitrogen and soil moisture.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.255-259
• /
• 1997

The essence of meridian collateral and acupoints is an overall physiologic unction with the level of multiple unctional states. However it is a pity that until present, so in this paper described about some experimental results of physical reactions of meridian and acupoints. In order to verify meridian pathway and channel theory of energy in body. It is suppose that substance of meridian is pathway channel of the meridian materials. In basic examination, It was analyzed spectrum of reflection waves after beat or continuos vibrate to meridian point and non-meridian point meridian line and non-meridian line. The characteristics of reflection waves similar to flow channel in hydrodynamic. So it be able to suggest that the meridian is pathway and channel in body.