• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.3
• /
• pp.13-24
• /
• 2016

What are the roles and functions of urban gardening created by citizens in Sujin 2-dong, Seongnam-si? This study has looked into urban gardening in everyday life in a bid to find possible solutions for sustainable urban regeneration. The paper has examined the types, functions, and characteristics of urban gardens in Sujin 2-dong, where the urban restoration project is in progress. This study has conducted primarily on-site inspections and interviews. The research findings are as follows. Most urban gardens in Sujin 2-dong have a vertical structure rather than a regular ground-based one due to lack of land. Six major locations of building a garden include the front of a building, rooftop, top of a gate, stairs, wall, and yard. Rooftop gardens are most common and are built mostly for production purposes. Due to architectural characteristics of this village, there are relatively many stair gardens built mostly for aesthetic purposes. The garden in front of a building has served multiple functions, including formation of entry, privacy protection, and prevention of unauthorized parking. Other than those, detached houses have quality urban gardens built with greater effort and care, while multi-household houses have seen a decrease of stair gardens and an increase of vertical gardens due to their comparatively limited space. By utilizing this research, we hope to show that it is important to understand the local's wisdom and voice for a sustainable urban environment as well as keep these findings in mind during the construction of new buildings. This study would be expected to be useful as primary research for urban gardening in everyday life and alternative ways of urban regeneration.

• Journal of Food Hygiene and Safety
• /
• v.30 no.3
• /
• pp.272-280
• /
• 2015

A simultaneous official method was developed for the determination of phorate and its metabolites (phorate sulfoxide, phorate sulfone, phorate oxon, phorate oxon sulfoxide, phorate oxon sulfone) in livestock samples. The analytes were quantified and confirmed via liquid chromatograph-tandem mass spectrometer (LC-MS/MS) in positive ion mode using multiple reaction monitoring (MRM). Phorate and its metabolites were extracted from beef and milk samples with acidified acetonitrile (containing 1% acetic acid) and partitioned with anhydrous magnesium sulfate. Then, the extract was purified through primary secondary amine (PSA) and C18 dispersive sorbent. Matrix matched calibration curves were linear over the calibration ranges (0.005-0.5 mg/L) for all the analytes into blank extract with $r^2$ > 0.996. For validation purposes, recovery studies were carried out at three different concentration levels (beef 0.004, 0.04 and 0.2 mg/kg; milk 0.008, 0.04 and 0.2 mg/kg, n = 5). The recoveries were within 79.2-113.9% with relative standard deviations (RSDs) less than 19.2% for all analytes. All values were consistent with the criteria ranges requested in the Codex guidelines. The limit of quantification was quite lower than the maximum residue limit (MRL) set by the Ministry of Food and Drug Safety (0.05 mg/kg). The proposed analytical method was accurate, effective and sensitive for phorate and its metabolites determination and it will be used to as an official analytical method in Korea.

• Journal of Distribution Science
• /
• v.10 no.6
• /
• pp.27-37
• /
• 2012

Many studies have focused on the importance of organizational integration when companies try to achieve growth through mergers and acquisitions (M&A). However, there has been little research that focuses on the new branding or customer base integration of the M&A process, despite the fact that this integration is very important for achieving M&A goals and business performance in industries such as retail. The purpose of this study is to provide an M&A case study of the retail industry, focused especially on the new branding and customer integration of two department stores. This study examined key integration processes in terms of brand name and membership systems of both companies by examining how the merged company achieved its new branding and the integration of its membership systems. The methodology of this research is the case study, which is used in both normative and empirical studies for distribution research in Korea. This research analyzes the case of both new branding and customer membership systems of the two companies. The new branding initiatives of this case centered on decision making including brand extension and brand naming. The customer membership integration of the two companies is analyzed on the basis of the customer reward programs that include both financial and service rewards. This study shows the success factors of new branding and customer integration in the M&A process in terms of achieving marketing goals and business performance as follows: First, companies should identify the integration areas by analyzing the brand and membership of both companies and make a balanced decision for both the customer and company. Second, the goals of new branding and membership integration in the M&A process should not emphasize business efficiency from a short-term perspective but rather should consider brand power and business synergy from a long-term perspective. Third, the post-merger integration process of the brand or customer areas requires not only the organized execution of integration tasks but also follow-up programs for changes in business strategy and marketing-related programs to realize the synergy effects of integrated organization. Although this study provides a detailed review and analysis of the new branding and customer integration processes in post-merger integration and in identifying the primary decision-making areas of these processes, there are some limitations requiring further research that may overcome or compensate for these limitations. The suggested future research areas are as follows: First, since this research is a case study of only one M&A, it makes few theoretical contributions such as new propositions or theories or possibilities for generalization. This limitation can be overcome through further research using multiple cases, which may lead to new propositions. Second, the methodology of this study lacks sufficient rigor in terms of its analytic approach because this case study was developed and analyzed descriptively. Further research is needed to compensate for these limitations, such as using a theory-based approach or comparative analysis approach that makes case analysis more systematic.

• Journal of Intelligence and Information Systems
• /
• v.22 no.2
• /
• pp.33-56
• /
• 2016

Many researchers have focused on developing bankruptcy prediction models using modeling techniques, such as statistical methods including multiple discriminant analysis (MDA) and logit analysis or artificial intelligence techniques containing artificial neural networks (ANN), decision trees, and support vector machines (SVM), to secure enhanced performance. Most of the bankruptcy prediction models in academic studies have used financial ratios as main input variables. The bankruptcy of firms is associated with firm's financial states and the external economic situation. However, the inclusion of qualitative information, such as the economic atmosphere, has not been actively discussed despite the fact that exploiting only financial ratios has some drawbacks. Accounting information, such as financial ratios, is based on past data, and it is usually determined one year before bankruptcy. Thus, a time lag exists between the point of closing financial statements and the point of credit evaluation. In addition, financial ratios do not contain environmental factors, such as external economic situations. Therefore, using only financial ratios may be insufficient in constructing a bankruptcy prediction model, because they essentially reflect past corporate internal accounting information while neglecting recent information. Thus, qualitative information must be added to the conventional bankruptcy prediction model to supplement accounting information. Due to the lack of an analytic mechanism for obtaining and processing qualitative information from various information sources, previous studies have only used qualitative information. However, recently, big data analytics, such as text mining techniques, have been drawing much attention in academia and industry, with an increasing amount of unstructured text data available on the web. A few previous studies have sought to adopt big data analytics in business prediction modeling. Nevertheless, the use of qualitative information on the web for business prediction modeling is still deemed to be in the primary stage, restricted to limited applications, such as stock prediction and movie revenue prediction applications. Thus, it is necessary to apply big data analytics techniques, such as text mining, to various business prediction problems, including credit risk evaluation. Analytic methods are required for processing qualitative information represented in unstructured text form due to the complexity of managing and processing unstructured text data. This study proposes a bankruptcy prediction model for Korean small- and medium-sized construction firms using both quantitative information, such as financial ratios, and qualitative information acquired from economic news articles. The performance of the proposed method depends on how well information types are transformed from qualitative into quantitative information that is suitable for incorporating into the bankruptcy prediction model. We employ big data analytics techniques, especially text mining, as a mechanism for processing qualitative information. The sentiment index is provided at the industry level by extracting from a large amount of text data to quantify the external economic atmosphere represented in the media. The proposed method involves keyword-based sentiment analysis using a domain-specific sentiment lexicon to extract sentiment from economic news articles. The generated sentiment lexicon is designed to represent sentiment for the construction business by considering the relationship between the occurring term and the actual situation with respect to the economic condition of the industry rather than the inherent semantics of the term. The experimental results proved that incorporating qualitative information based on big data analytics into the traditional bankruptcy prediction model based on accounting information is effective for enhancing the predictive performance. The sentiment variable extracted from economic news articles had an impact on corporate bankruptcy. In particular, a negative sentiment variable improved the accuracy of corporate bankruptcy prediction because the corporate bankruptcy of construction firms is sensitive to poor economic conditions. The bankruptcy prediction model using qualitative information based on big data analytics contributes to the field, in that it reflects not only relatively recent information but also environmental factors, such as external economic conditions.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.804-811
• /
• 2010

The lower portion of sloping paddy fields normally contains excessive moisture and the higher water table caused by the inflow of ground water from the upper part of the field resulting in non-uniform water content distribution. Four drainage methods namely Open Ditch, Vinyl Barrier, Pipe Drainage and Tube Bundle for multiple land use were installed within 1-m position from the lower edge of the upper embankment of sloping alluvial paddy fields. Knowledge of the spatial variability of soil water properties is of primary importance for management of agricultural lands. This study was conducted to evaluate the effect of drainage in the soil on spatial variability of soil water content using the geostatistical analysis. The soil water content was collected by a TDR (Time Domain Reflectometry) sensor after the installation of subsurface drainage on regular square grid of 80 m at 20 m paddy field located at Oesan-ri, Buk-myeon, Changwon-si in alluvial slopping paddy fields ($35^{\circ}22^{\prime}$ N, $128^{\circ}35^{\prime}$). In order to obtain the most accurate field information, the sampling grid was divided 3 m by 3 m unit mesh by four drainage types. The results showed that spatial variance of soil water content by subsurface drainage was reduced, though yield of soybean showed the same trends. Value of "sill" of soil water content with semivariogram was 9.7 in Pipe Drainage, 86.2 in Open Ditch, and 66.8 in Vinyl Barrier and 15.7 in Tube Bundle.

• Journal of Intelligence and Information Systems
• /
• v.24 no.4
• /
• pp.197-217
• /
• 2018

Music is one of the most creative act that can express human sentiment with sound. Also, since music invoke people's sentiment to get empathized with it easily, it can either encourage or discourage people's sentiment with music what they are listening. Thus, sentiment is the primary factor when it comes to searching or recommending music to people. Regard to the music recommendation system, there are still lack of recommendation systems that are based on customer sentiment. An algorithm's that were used in previous music recommendation systems are mostly user based, for example, user's play history and playlists etc. Based on play history or playlists between multiple users, distance between music were calculated refer to basic information such as genre, singer, beat etc. It can filter out similar music to the users as a recommendation system. However those methodology have limitations like filter bubble. For example, if user listen to rock music only, it would be hard to get hip-hop or R&B music which have similar sentiment as a recommendation. In this study, we have focused on sentiment of music itself, and finally developed methodology of defining new index for music recommendation system. Concretely, we are proposing "SWEMS" index and using this index, we also extracted "Sentiment Pattern" for each music which was used for this research. Using this "SWEMS" index and "Sentiment Pattern", we expect that it can be used for a variety of purposes not only the music recommendation system but also as an algorithm which used for buildup predicting model etc. In this study, we had to develop the music recommendation system based on emotional adjectives which people generally feel when they listening to music. For that reason, it was necessary to collect a large amount of emotional adjectives as we can. Emotional adjectives were collected via previous study which is related to them. Also more emotional adjectives has collected via social metrics and qualitative interview. Finally, we could collect 134 individual adjectives. Through several steps, the collected adjectives were selected as the final 60 adjectives. Based on the final adjectives, music survey has taken as each item to evaluated the sentiment of a song. Surveys were taken by expert panels who like to listen to music. During the survey, all survey questions were based on emotional adjectives, no other information were collected. The music which evaluated from the previous step is divided into popular and unpopular songs, and the most relevant variables were derived from the popularity of music. The derived variables were reclassified through factor analysis and assigned a weight to the adjectives which belongs to the factor. We define the extracted factors as "SWEMS" index, which describes sentiment score of music in numeric value. In this study, we attempted to apply Case Based Reasoning method to implement an algorithm. Compare to other methodology, we used Case Based Reasoning because it shows similar problem solving method as what human do. Using "SWEMS" index of each music, an algorithm will be implemented based on the Euclidean distance to recommend a song similar to the emotion value which given by the factor for each music. Also, using "SWEMS" index, we can also draw "Sentiment Pattern" for each song. In this study, we found that the song which gives a similar emotion shows similar "Sentiment Pattern" each other. Through "Sentiment Pattern", we could also suggest a new group of music, which is different from the previous format of genre. This research would help people to quantify qualitative data. Also the algorithms can be used to quantify the content itself, which would help users to search the similar content more quickly.

• Journal of The Korean Society of Emergency Medicine
• /
• v.29 no.5
• /
• pp.465-473
• /
• 2018

Objective: We evaluated the clinical characteristics and prognoses of patients with septic shock who transferred to the emergency department (ED) in a tertiary referral center. Methods: This study was performed using a prospective, multi-center registry of septic shock, with the participation of 11 tertiary referral centers in the Korean Shock Society between October 2015 and February 2017. We classified the patients as a transferred group who transferred from other hospitals after meeting the inclusion criteria upon ED arrival and a non-transferred group who presented directly to the ED. Primary outcome was hospital mortality. We conducted multiple logistic regression analysis to assess variables related to in-hospital mortality. Results: A total of 2,098 patients were included, and we assigned 717 patients to the transferred group and 1,381 patients to the non-transferred group. The initial Sequential Organ Failure Assessment score was higher in the transferred group than the non-transferred group (6; interquartile range [IQR], 4-9 vs. 6; IQR, 4-8; P<0.001). Mechanical ventilator (29% vs. 21%, P<0.001) and renal replacement therapy (12% vs. 9%, P=0.034) within 24 hours after ED arrival were more frequently applied in the transferred group than the non-transferred group. Overall hospital mortality was 22% and there was no significant difference between transferred and non-transferred groups (23% vs. 22%, P=0.820). Multivariable analysis showed an odds ratio for in-hospital mortality of 1.00 (95% confidence interval, 0.78-1.28; P=0.999) for the transferred group compared with the non-transferred group. Conclusion: The transferred group showed higher severity and needed more organ support procedures than the non-transferred group. However, inter-hospital transfer did not affect in-hospital mortality.

• Journal of Food Hygiene and Safety
• /
• v.34 no.2
• /
• pp.140-147
• /
• 2019

An analytical method was developed for the determination of quinoxyfen in agricultural products using the QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) method by liquid chromatography-tandem mass spectrometry (LC-MS/MS). The samples were extracted with 1% acetic acid in acetonitrile and water was removed by liquid-liquid partitioning with $MgSO_4$ (anhydrous magnesium sulfate) and sodium acetate. Dispersive solid-phase extraction (d-SPE) cleanup was carried out using $MgSO_4$, PSA (primary secondary amine), $C_{18}$ (octadecyl) and GCB (graphitized carbon black). The analytes were quantified and confirmed by using LC-MS/MS in positive mode with MRM (multiple reaction monitoring). The matrix-matched calibration curves were constructed using six levels ($0.001-0.25{\mu}g/mL$) and the coefficient of determination ($R^2$) was above 0.99. Recovery results at three concentrations (LOQ, 10 LOQ, and 50 LOQ, n=5) were in the range of 73.5-86.7% with RSDs (relative standard deviations) of less than 8.9%. For inter-laboratory validation, the average recovery was 77.2-95.4% and the CV (coefficient of variation) was below 14.5%. All results were consistent with the criteria ranges requested in the Codex guidelines (CAC/GL 40-1993, 2003) and Food Safety Evaluation Department guidelines (2016). The proposed analytical method was accurate, effective and sensitive for quinoxyfen determination in agricultural commodities. This study could be useful for the safe management of quinoxyfen residues in agricultural products.

• Journal of Wetlands Research
• /
• v.24 no.4
• /
• pp.345-353
• /
• 2022

A wastewater treatment plant (WWTP) is a major gateway for the engineered nano-particles (ENPs) entering the water bodies. However existing studies have reported that many WWTPs exceed the No Observed Effective Concentration (NOEC) for ENPs in the effluent and thus they need to be designed or operated to more effectively control ENPs. Understanding and predicting ENPs behaviors in the unit and \the whole process of a WWTP should be the key first step to develop strategies for controlling ENPs using a WWTP. This study aims to provide a modeling tool for predicting behaviors and removal efficiencies of ENPs in a WWTP associated with process characteristics and major operating conditions. In the developed model, four unit processes for water treatment (primary clarifier, bioreactor, secondary clarifier, and tertiary treatment unit) were considered. Additionally the model simulates the sludge treatment system as a single process that integrates multiple unit processes including thickeners, digesters, and dewatering units. The simulated ENP was nano-sized TiO₂, (nano-TiO₂) assuming that its behavior in a WWTP is dominated by the attachment with suspendid solids (SS), while dissolution and transformation are insignificant. The attachment mechanism of nano-TiO₂ to SS was incorporated into the model equations using the apparent solid-liquid partition coefficient (Kd) under the equilibrium assumption between solid and liquid phase, and a steady state condition of nano-TiO₂ was assumed. Furthermore, an MS Excel-based user interface was developed to provide user-friendly environment for the nano-TiO₂ removal efficiency calculations. Using the developed model, a preliminary simulation was conducted to examine how the solid retention time (SRT), a major operating variable affects the removal efficiency of nano-TiO₂ particles in a WWTP.

• Tuberculosis and Respiratory Diseases
• /
• v.85 no.1
• /
• pp.37-46
• /
• 2022

Background: Although respiratory tract infection is one of the most important factors triggering acute exacerbation of chronic obstructive pulmonary disease (AE-COPD), limited data are available to suggest an epidemiologic pattern of microbiology in South Korea. Methods: A multicenter observational study was conducted between January 2015 and December 2018 across 28 hospitals in South Korea. Adult patients with moderate-to-severe acute exacerbations of COPD were eligible to participate in the present study. The participants underwent all conventional tests to identify etiology of microbial pathogenesis. The primary outcome was the percentage of different microbiological pathogens causing AE-COPD. A comparative microbiological analysis of the patients with overlapping asthma-COPD (ACO) and pure COPD was performed. Results: We included 1,186 patients with AE-COPD. Patients with pure COPD constituted 87.9% and those with ACO accounted for 12.1%. Nearly half of the patients used an inhaled corticosteroid-containing regimen and one-fifth used systemic corticosteroids. Respiratory pathogens were found in 55.3% of all such patients. Bacteria and viruses were detected in 33% and 33.2%, respectively. Bacterial and viral coinfections were found in 10.9%. The most frequently detected bacteria were Pseudomonas aeruginosa (9.8%), and the most frequently detected virus was influenza A (10.4%). Multiple bacterial infections were more likely to appear in ACO than in pure COPD (8.3% vs. 3.6%, p=0.016). Conclusion: Distinct microbiological patterns were identified in patients with moderate-to-severe AE-COPD in South Korea. These findings may improve evidence-based management of patients with AE-COPD and represent the basis for further studies investigating infectious pathogens in patients with COPD.