• 한국산업정보학회논문지
• /
• 제19권4호
• /
• pp.1-8
• /
• 2014

음영 지역 해소 및 셀 커버리지 확대를 위하여 중계기를 활용하는 이동 통신 시스템이 널리 연구되고 있다. 본 논문에서는 중계기를 통해 다중 경로가 확보된 음영 지역에서 주파수 공간 블록 부호를 적용한 OFDMA(orthogonal frequency division multiple access) 전송 시스템을 제안한다. 다중 중계기에서 복원된 전송 신호에 대하여 주파수 공간 블록 부호를 적용하여 재전송함으로서 음영 지역 내 단말기의 수신 성능을 크게 향상시킬 수 있다. 실험을 통해, 제안된 주파수 공간 블록 부호화 OFDMA 전송 시스템의 성능이 기존의 단일 경로 OFDMA 전송 시스템의 성능보다 우수함을 확인한다.

• 융합보안논문지
• /
• 제12권3호
• /
• pp.35-43
• /
• 2012

최근 스마트 폰과 같은 다양한 단말의 보급이 확대됨에 따라 지속적인 트래픽 증가로 인해 이를 처리하기 위한 전달망 및 통신망 제어기술 또한 급속히 발전하고 있다. 이러한 추세를 반영하여 차세대 네트워크는 다양한 스위칭 계층으로 구성되고 이를 Generalized Multi-Protocol Label Switching(GMPLS) 프로토콜로 제어하는 형태로 구성될 것이다. 그러나 다계층 네트워크에서의 장애는 보호 복구 기능들 간의 충돌을 유발하여, 복구 시간의 지연, 망 자원의 비효율적 사용 등을 초래할 수 있다. 따라서 계층별 보호 복구 기능 간의 신속한 복구 경로설정이 다계층 네트워크에서 가장 중요한 과제가 되었다. 본 논문에서는 PCE(Path Computation Element)를 기반으로 다계층, 다중 도메인 네트워크에서 최적의 트래픽 엔지니어링을 지원하기 위한 기법을 제안하였다.

• 한국소음진동공학회논문집
• /
• 제20권11호
• /
• pp.1071-1077
• /
• 2010

The reduction of the vehicle interior noise has been the main interest of noise and vibration harshness(NVH) engineers. A passenger vehicle has various and complicated transmission paths of sound and vibration. In order to identify the mechanism of transfer path, estimation of excitation force and exact modeling of transfer path are required. This paper presents method for estimating the noise source contribution on the road noise of the vehicle in a multiple input system where the input sources may be coherent with each other. And vector synthesis technique is employed to identify the characteristics of road noise and its transmission to vehicle compartment through noise and vibration analysis. Vibration reduction efficiency of each transfer path is evaluated by comparing individual vector components obtained virtual simulation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.386.1-386
• /
• 2002

It is necessary to determine the vibration source and its transmission paths in order to develop a low-noise compressor Through the use of multiple-input/single-output(MISO) model, the transmission paths of vibration within a reciprocating compressor have been investigated. In order to identify the transmission path, we measure the accelerations of the block and transverse vibrations of the line discharge tube. (omitted)

• ETRI Journal
• /
• 제43권1호
• /
• pp.133-140
• /
• 2021

Herein, we present a compact transversal bandpass filter (BPF) with an extremely wide upper stopband and multiple transmission zeros (TZ). Three signal transmission paths with shorted stubs and open-coupled lines allow signal transmission from input port to output port. Two resonant modes can be excited simultaneously and managed easily for bandpass response. Eleven TZs are achieved via transmission path cancelation; an extremely wide upper stopband with an attenuation level better than -12 dB is achieved up to 11.7 f0, where f0 is the center frequency (CF). In addition, bandwidth and CF can be controlled by adjusting electrical lengths. For proof of concept, a wideband BPF centered at 1.04 GHz with 3 dB fractional bandwidths of 49.2% was designed, fabricated, and evaluated. The overall circuit measures 0.045λg × 0.117λg; good agreement was observed between the measured and simulated results.

• 한국통신학회논문지
• /
• 제33권5B호
• /
• pp.260-267
• /
• 2008

기존의 SAR(Security Aware Routing)[9] 프로토콜은 Ad Hoc 네트워크의 보안경로를 발견하는 프로토콜로, 이동 노드에 부여된 보안레벨 속성 값을 라우팅 정보로 이용하는 보안라우팅 프로토콜이다. 그러나 SAR 프로토콜은 암호화된 데이터 전달을 위해 보안노드를 경유로 데이터를 전송하므로 비밀통신과 효율적인 통신이 고려되지 않고 있다. 또한, AODV[3] 프로토콜 기반으로 동작하기 때문에 데이터의 전송 중 중간노드의 배터리소진 또는 중간노드의 이동으로 데이터 전달에 있어 통신이 단절될 경우 보안노드를 경유하는 라우팅 경로를 재탐색하게 되어 데이터의 전송지연 문제가 발생한다. 그 외에도 SAR 프로토콜의 특성상 재탐색의 경우 노드간의 연결은 가능하지만 데이터 전송에 있어서 요구되는 노드의 보안레벨 이하의 노드인 경우 경로설정이 중단되는 문제들로 재연결이 용이하지 않다. 본 논문에서는 SAR 프로토콜의 문제점을 개선하기 위해 다중경로 기반의 SAR 프로토콜인 MP-SAR을 제안한다. MP-SAR은 데이터의 기밀성을 유지하기 위해 SAR의 보안경로 탐지기법의 확장으로 다중경로를 탐색하고, 유효한 최단보안경로의 이용으로 안전한 고속의 데이터 전달을 할 수 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.875-880
• /
• 2002

It is necessary to determine the vibration source and its transmission paths in order to develop a low-noise compressor. Through the use of multiple-input/single-output(MISO) mode1, the transmission paths of vibration within a reciprocating compressor have been investigated. In order to identify the transmission path, we measure the accelerations of the block and transverse vibrations of the line discharge tube. As outputs, vibrations of compressor shell were measured at three positions; cylinder head, one near the suction line, and the top of upper shell. The partial coherence function and transfer function are obtained ken the measured data, and the results are observed in order to determine vibration source and its influence on the shell vibration.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.77-80
• /
• 2001

In this paper, it is analyzed the statistical characteristics on the transmission performance of the optical SCM transmission in the CDMA RF signal relay system. Using Mach-Zehnder modulator, optical signal is regenerated into CDMA RF signal. Transfer function model of mach-Zehnder modulator is approximated to the third power of the input signal using Taylor series. BER results are analyzed under the multiple access interference and multi-path fading environment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권10호
• /
• pp.2658-2681
• /
• 2023

In edge computing scenarios, IoT end devices play a crucial role in relaying and forwarding data to significantly improve IoT network performance. However, traditional routing mechanisms are not applicable to this scenario due to differences in network size and environment. Therefore, it becomes crucial to establish an effective and reliable data transmission path to ensure secure communication between devices. In this paper, we propose a trusted path selection strategy that comprehensively considers multiple attributes, such as link stability and edge cooperation, and selects a stable and secure data transmission path based on the link life cycle, energy level, trust level, and authentication status. In addition, we propose the Stability-based On-demand Multipath Distance Vector (STAOMDV) protocol based on the Ad hoc AOMDV protocol. The STAOMDV protocol implements the collection and updating of link stability attributes during the route discovery and maintenance process. By integrating the STAOMDV protocol with the proposed path selection strategy, a dependable and efficient routing mechanism is established for IoT networks in edge computing scenarios. Simulation results validate that the proposed STAOMDV model achieves a balance in network energy consumption and extends the overall network lifespan.

• 대한임베디드공학회논문지
• /
• 제11권6호
• /
• pp.379-392
• /
• 2016

This paper presents the design and simulation of a laser power beaming (LPB) system for an electric vehicle that establishes an optimal power transmission path based on the received signal strength. The LPB system is possible to transfer power from multiple transmitters to a single receiver according to the characteristics of the laser and the solar panel. When the laser beams of multiple transmitters aim at a solar panel at the same time, the received power is the sum of all energy at a solar panel. Our proposed LPB system consists of multiple transmitters and multiple receivers. The transmitter sends its power characteristics as optically coded pulses with a class 1 laser beam and powers as a high-intensity laser beam. By using the attenuated power level, the receiver can estimate the maximum receivable powers from the transmitters and select optimal transmitters. Throughout the simulation, we verified the possibility that different LPB receivers were achieved their required power by the optimal allocation of the transmitter among the various transmitters.