• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.6
• /
• pp.413-419
• /
• 2003

The objective of this paper is to survey and put in perspective the existing methods of dynamic filter development. This includes theories and practices for linear and nonlinear filters, multiple model filters, and data association methods for tracking in multitarget environment. The presentation of this paper is motivated by recent surge of interest in the area of designing feedback control systems with reduced number of sensors, detection and identification of abrupt changes, and multitarget tracking in clutter. It is hoped to be useful in view of the need to take a grasp of existing techniques before using them in practice and developing new techniques.

• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.556-561
• /
• 2011

It is generally known that particle filters can produce consistent target tracking performance in comparison to the Kalman filter for non-linear and non-Gaussian systems. In this paper, I propose a Rao-Blackwellized multiple model particle filter(RBMMPF) to enhance computational efficiency of the particle filters as well as to reduce sensitivity of modeling. Despite that the Rao-Blackwellized particle filter needs less particles than general particle filter, it has a similar tracking performance with a less computational load. Comparison results for performance is listed for the using single sensor information RBMMPF and using multisensor data fusion RBMMPF.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.8
• /
• pp.859-866
• /
• 2009

The article discusses an issue of estimating the airspeed of an autonomous flying vehicle. Airspeed is the difference between ground speed and wind speed. It is desirable to know any two among the three speeds for navigation, guidance and control of an autonomous vehicle. For example, ground speed and position are used to guide a vehicle to a target point and wind speed and airspeed are used to maximize flight performance such as a gliding range. However, the target vehicle has not an airspeed sensor but a ground speed sensor (GPS/INS). So airspeed or wind speed has to be estimated. Here, airspeed is to be estimated. A vehicle's dynamics and its dynamic parameters are used to estimate airspeed with attitude and angular speed measurements. Kalman filter is used for the estimation. There are also two major sources arousing a robust estimation problem; wind speed and altitude. Wind speed and direction depend on weather conditions. Altitude changes as a vehicle glides down to the ground. For one reference altitude, multiple model Kalman filters are pre-designed based on several reference airspeeds. We call this group of filters as a cluster. Filters of a cluster are activated simultaneously and probabilities are calculated for each filter. The probability indicates how much a filter matches with measurements. The final airspeed estimate is calculated by summing all estimates multiplied by probabilities. As a vehicle glides down to the ground, other clusters that have been designed based on other reference altitudes are activated. Some numerical simulations verify that the proposed method is effective to estimate airspeed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.6
• /
• pp.764-776
• /
• 1999

In this paper, a tracking algorithm for a maneuvering single target in the presence of multiple data from multiple sensors is investigated. Allowing individual sensors to function by themselves, the estimates from individual sensors on the same target are fused for the purpose of improving the state estimate. The filtering method adopted in the local sensors is the variable dimensional filter with input estimatio technique, which consists of a constant velocity model and a constant acceleration model. A posteriori probability for the maneuvering hypothesis is newly derived. It is shown that the relation function of the a posteriori probability is a function of only the covariance of the fused estimates. Simulation results are provided.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.2
• /
• pp.173-182
• /
• 2005

In this paper, a target tracking algorithm for tracking maneuvering vehicles is presented. The overall algorithm belongs to the category of an interacting multiple-model (IMM) algorithm used to detect multiple targets using fused information from multiple sensors. First, two kinematic models are derived: a constant velocity model for linear motions, and a constant-speed turn model for curvilinear motions. Fpr the constant-speed turn model, a nonlinear information filter is used in place of the extended Kalman filter. Being equivalent to the Kalman filter (KF) algebraically, the information filter is extended to N-sensor distributed dynamic systems. The model-matched filter used in multi-sensor environments takes the form of a federated nonlinear information filter. In multi-sensor environments, the information-based filter is easier to decentralize, initialize, and fuse than a KF-based filter. In this paper, the structural features and information sharing principle of the federated information filter are discussed. The performance of the suggested algorithm using a Monte Carlo simulation under the two patterns is evaluated.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.8
• /
• pp.1997-2004
• /
• 1994

A model analysis method has been developed in the paper. The method estimates the modal parameters of multiple input-output systems, assesses their quality, and seperates structural modes form computation ones. The modal parameter extraction algorithm is the least squares method with a finite difference model relating input and output time data. The quality of the estimated system model can be assessed in narrow frequency bands by comparing the measured and model predicted responses in time domain with the aid of digital filters. Structural modes can be effectively separated from computational ones using the convergence factor which represents the pole convergence rate. The modal analysis method has been applied to simulated and experimental vibration data to evaluate its utility and limitations.

• Smart Media Journal
• /
• v.9 no.3
• /
• pp.59-70
• /
• 2020

This paper presents a fully automatic tool to recognize the liver region from CT images based on a deep learning model, namely Multiple Filter U-net, MFUnet. The advantages of both U-net and Multiple Filters were utilized to construct an autoencoder model, called MFUnet for segmenting the liver region from computed tomograph. The MFUnet architecture includes the autoencoding model which is used for regenerating the liver region, the backbone model for extracting features which is trained on ImageNet, and the predicting model used for liver segmentation. The LiTS dataset and Chaos dataset were used for the evaluation of our research. This result shows that the integration of Multiple Filter to U-net improves the performance of liver segmentation and it opens up many research directions in medical imaging processing field.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1524-1529
• /
• 2005

Particle filter is a kind of conditional density propagation model. Its similar characteristics to both selection and mutation operator of evolutionary strategy (ES) due to its Bayesian inference rule structure, shows better performance than any other tracking algorithms. When a new object is entering the region of interest, particle filter sets which have been swarming around the existing objects have to move and track the new one instantaneously. Moreover, there is another problem that it could not track multiple objects well if they were moving away from each other after having been overlapped. To resolve reinitialization problem, we use competitive-AVQ algorithm of neural network. And we regard interfarme difference (IFD) of background images as potential field and give priority to the particles according to this IFD to track multiple objects independently. In this paper, we showed that the possibility of real-time object tracking as intelligent interfaces by simulating the deformable contour particle filters.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.8
• /
• pp.733-739
• /
• 2008

This article proposes algorithms for the automatic initiation of the tracks of maneuvering targets in cluttered environments. These track initiation algorithms consist of IPDA-AI(Integrated Probabilistic Data Association-Amplitude Information) and MPDA(Most Probable Data Association) in an Interacting Multiple Model(IMM) configuration, and they are referred to as the IMM-IPDAF-AI and IMM-MPDA respectively. The IMM portion consists of several filters based on different dynamical models to handle target maneuvers. Each of the filters utilizes an IPDA-AI(or MPDA) algorithm to deal with the problem of track existence in the presence of clutter. Although the primary purpose of this study is to deal with the track initiation problem, the IMM-IPDAF-AI and IMM-MPDA can also be used for the maintenance of existing tracks and the termination of tracks for targets when they disappear. For illustrative purposes, simulation is used to compare the performance of the algorithms proposed to other track formation algorithms.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.4
• /
• pp.387-393
• /
• 2002

The enhancement technique of noise signal using mixture HFM (Midden Filter Model) are proposed. Given the parameters of the clean signal and noise, noisy signal is modeled by a linear state-space model with Markov switching parameters. Estimation of state vector is required for estimating original signal. The estimation procedure is based on mixture interacting multiple model (MIMM) and the estimator of speech is given by the weighted sum of parallel Kalman filters operating interactively. Simulation results showed that the proposed method offers performance gains relative to the previous results with slightly increased complexity.