• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.3
• /
• pp.341-352
• /
• 2012

In large-type goats that were fed on dry forage twice daily, dry forage intake was markedly suppressed after 40 min of feeding had elapsed. The objective of this study was to determine whether or not marked decreases in dry forage intake after 40 min of feeding are mainly caused by the two factors, that is, ruminal distension and increased plasma osmolality induced thirst produced by dry forage feeding. Six large-type male esophageal- and ruminal-fistulated goats (crossbred Japanese Saanen/Nubian, aged 2 to 6 years, weighing $85.1{\pm}4.89kg$) were used in two experiments. The animals were fed ad libitum a diet of roughly crushed alfalfa hay cubes for 2 h from 10:00 to 12:00 am during two experiments. Water was withheld during feeding in both experiments but was available for a period of 30 min after completion of the 2 h feeding period. In experiment 1, saliva lost via the esophageal fistula was replenished by an intraruminal infusion of artificial parotid saliva (RIAPS) in sham feeding conditions (SFC) control, and the treatment was maintained under normal feeding conditions (NFC). In experiment 2, a RIAPS and non-insertion of a balloon (RIAPS-NB) control was conducted in the same manner as the SFC control of experiment 1. The intraruminal infusion of hypertonic solution and insertion of a balloon (RIHS-IB) treatment was carried out simultaneously to reproduce the effects of changing salt content and ruminal distension due to feed entering the rumen. The results of experiment 1 showed that due to the effects of multiple dry forage suppressing factors when feed boluses entered the rumen, eating rates in the NFC treatment decreased (p<0.05) after 40 min of feeding and cumulative dry forage intake for the 2 h feeding period reduced to 43.8% of the SFC control (p<0.01). The results of experiment 2 indicated that due to the two suppressing factors of ruminal distension and increased plasma osmolality induced thirst, eating rates in the RIHS-IB treatment were, as observed under NFC, reduced (p<0.05) and cumulative dry forage intake for the 2 h feeding period decreased to 34.0% of the RIAPS-NB control (p<0.01). The combined effects of ruminal distension and increased plasma osmolality accounted for 77.5% of the suppression of dry forage intake 40 min after the start of dry forage feeding. The results indicate that ruminal distension and increased plasma osmolality induced thirst are the main factors in the suppression of dry forage intake in large-type goats.

• Animal Bioscience
• /
• v.35 no.11
• /
• pp.1760-1770
• /
• 2022

Objective: It is crucial to accurately determine the net energy (NE) values of feed ingredients because the NE system is expected to be applied to the formulation of broilers feed. The NE values of 5 wheat and 5 wheat brans were determined in 12-to 14-day old Arbor Acres (AA) broilers with substitution method and indirect calorimetry method. Methods: A total of 12 diets, including 2 reference diets (REF) and 10 test diets (5 wheat diets and 5 wheat bran diets) containing 30% of test ingredients, were randomly fed to 864 male AA birds with 6 replicates of 12 birds per treatment. These birds were used to determine metabolizable energy (ME) (8 birds per replicate) in the chicken house and NE (4 birds per replicate) in the chamber respectively at the same time. After a 4-d dietary and environment adaptation period, growth performance, energy values, energy balance and energy utilization were measured during the following 3 d. Multiple linear regression analyses were further performed to generate prediction equations for NE values based on the chemical components and ME values. The NE prediction equation were also validated on another wheat diet and another wheat bran diet with high correlation (r = 0.98, r = 0.75). Results: The NE values of 5 wheat and 5 wheat bran samples are 9.34, 10.02, 10.27, 11.33, and 10.49 MJ/kg, and 5.37, 5.17, 4.87, 5.06, and 4.88 MJ/kg DM, respectively. The equation with the best fit were NE = 1.968AME-0.411×ADF-14.227 (for wheat) and NE = -0.382×CF-0.362×CP-0.244×ADF+20.870 (for wheat bran). Conclusion: The mean NE values of wheat and wheat bran are 10.29 and 5.07 MJ/kg DM in AA broilers. The NE values of ingredients could be predicted by their chemical composition and energy value with good fitness.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.92-92
• /
• 2022

In preparation for the ever-changing climate and unification of North Korea and South Korea, it is necessary to increase the grain self-sufficiency rate by selecting crops with good utilization in high-altitude regions. The principle is to sow pastures at the end of August. However, sowing occurs in spring because the sowing period is missed when the weather is bad or when the workforce is insufficient. Sometimes when the grassland is completely devastated, it is frequently sowed in spring. In addition, North Korea consists of a high-altitude regions, and has been devastated in a general mountainous region. As a result, the landscape is not good and it is vulnerable to natural disasters such as landslides. Therefore, to prevent this, pasture must be sowed in the high-altitude regions. The goal of this study was to evaluate and compare yield and feed value of pasture species and varieties by spring sowing in high-latitude regions. The study was conducted in Pyeongchang, Gangwon-do, which is 700m height above sea level. The pasture species and varieties was sown on April 24, 2022. Each treatment was carried out by sowing 30 kg/ha, the experiment field size was 1 m²(1m×1m), and randomized block design with tri-repeat. The total of 14 varieties was used in the study, 6 varieties of Orchardgrass (OG), 6 varieties of Tall fescue (TF) and 2 varieties of Perennial ryegrass (PRG). The grassland composition fertilization using (N:P₂O₅:K₂O at 80:200:70 kg/ha) was conducted and management fertilizer was N:P₂O₅:K₂O at 210:150:180 kg/ha. The first harvest was June 26,2022 and the second harvest was on August 16, 2022. For statistical analysis of the data, an Analysis of Variance (ANOVA) was performed using the R3.6.3 software program, and all data was subjected to analysis using Duncan's multiple range test. Significance was set at the 5% level. The dry matter yield at the first harvest was the highest in PRG, and second harvest was the highest in TF (p < 0.05). Overall, PRG showed a trend of gradually decreasing growth, OG and TF showed a trend of gradually improving growth. This showed that PRG was considerably weaker to summer depression than other pasture species. Comparing the total dry matter yield, TF was the highest (4,565.45 kg/ha), but there was no significance difference with PRG (4,487.24 kg/ha) (p < 0.05). In addition, comparing the total TDN (total digestible nutrient) yield, TF was the highest (3147.33 kg/ha), second in PRG (2975.67 kg/ha) and third in OG (2052.33 kg/ha). Since this result is the data of the second harvests, if the result is derived by the end of next year, it will be provided as basic data for selection of pasture species and varieties suitable for spring seeding in high-altitude regions.

• Korean Journal of Poultry Science
• /
• v.38 no.3
• /
• pp.173-179
• /
• 2011

This experiment was conducted to evaluate the dietary effects of multiple mixture of probiotics on laying performance and the faecal examination in laying hens (Hy-line Brown) at the early (21~40 wk) and middle (41~65 wk) laying term. Multiple probiotics were produced by developing products and the properties of microorganisms were examined for detecting of acid-resistance, bile salt-resistance and antibacterial activity against pathogenic enteric bacteria. Probiotics produced to the fermenting cultures of four selected organisms and soybean meal substrates by nine steps of NK proliferating system. The most microorganisms were shown higher resistance of acidity and bile salt. High antibacterial activities against Bacillus subtilis, Lactobacillus plantarum and Enterococcus faecium were observed, but was not against Saccharomyces cerevisiae. Total egg production of the treatment was significantly higher than control group but was not statistically different between 0.1% and 0.2% treatments (P>0.05). Average egg weight of the treatment in early laying term was also significantly higher than control but was not significantly different between 0.1% and 0.2% treatments (P>0.05). But the egg weight of the treatment in middle laying term was significantly higher than control and between 0.1% and 0.2% treatments (P>0.05). The mortality of 0.2% treatment was significantly lower than control (P<0.05), and 0.2% treatment in the early laying term was tended to decreased than 0.1% treatment and control. But there was not significantly between 0.1% and 0.2% treatments in middle laying term. In feed intake, 0.2% treatment in middle laying term was significantly increased than control and 0.1% treatment (P<0.05) but not in early laying term. In faecal examination, the total number of Lactobacillus of 0.1% treatment was significantly increased than control in whole laying term (P<0.05), but Coli form of the treatment was decreased than control in middle laying term. In conclusion, dietary long term supplementation of multiple probiotics improved performance of lay hens, egg weight and mortality drop by regulating enteric bacteria.

• Steel and Composite Structures
• /
• v.34 no.5
• /
• pp.681-698
• /
• 2020

The paper addresses contribution to the modeling and optimization of major machinability parameters (cutting force, surface roughness, and tool wear) in finish dry hard turning (FDHT) for machinability evaluation of hardened AISI grade die steel D₃ with PVD-TiN coated (Al₂O₃-TiCN) mixed ceramic tool insert. The turning trials are performed based on Taguchi's L₁₈ orthogonal array design of experiments for the development of regression model as well as adequate model prediction by considering tool approach angle, nose radius, cutting speed, feed rate, and depth of cut as major machining parameters. The models or correlations are developed by employing multiple regression analysis (MRA). In addition, statistical technique (response surface methodology) followed by computational approaches (genetic algorithm and particle swarm optimization) have been employed for multiple response optimization. Thereafter, the effectiveness of proposed three (RSM, GA, PSO) optimization techniques are evaluated by confirmation test and subsequently the best optimization results have been used for estimation of energy consumption which includes savings of carbon footprint towards green machining and for tool life estimation followed by cost analysis to justify the economic feasibility of PVD-TiN coated Al₂O₃+TiCN mixed ceramic tool in FDHT operation. Finally, estimation of energy savings, economic analysis, and sustainability assessment are performed by employing carbon footprint analysis, Gilbert approach, and Pugh matrix, respectively. Novelty aspects, the present work: (i) contributes to practical industrial application of finish hard turning for the shaft and die makers to select the optimum cutting conditions in a range of hardness of 45-60 HRC, (ii) demonstrates the replacement of expensive, time-consuming conventional cylindrical grinding process and proposes the alternative of costlier CBN tool by utilizing ceramic tool in hard turning processes considering technological, economical and ecological aspects, which are helpful and efficient from industrial point of view, (iii) provides environment friendliness, cleaner production for machining of hardened steels, (iv) helps to improve the desirable machinability characteristics, and (v) serves as a knowledge for the development of a common language for sustainable manufacturing in both research field and industrial practice.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.393-400
• /
• 2021

Body weight of livestock is a crucial indicator for assessing feed requirements and nutritional status. This study was performed to estimate the body weight of Korean cattle (Hanwoo) using body volume determined from three-dimensional (3-D) image. A TOF camera with a resolution of 640×480 pixels, a frame rate of 44 fps and a field of view of 47°(H)×37°(V) was used to capture the 3-D images for Hanwoo. A grid image of the body was obtained through preprocessing such as separating the body from background and removing outliers from the obtained 3-D image. The body volume was determined by numerical integration using depth information to individual grid. The coefficient of determination for a linear regression model of body weight and body volume for calibration dataset was 0.8725. On the other hand, the coefficient of determination was 0.9083 in a multiple regression model for estimating body weight, in which the age of Hanwoo was added to the body volume as an explanatory variable. Mean absolute percentage error and root mean square error in the multiple regression model to estimate the body weight for validation dataset were 8.2% and 24.5kg, respectively. The performance of the regression model for weight estimation was improved and the effort required for estimating body weight could be reduced as the body volume of Hanwoo was used. From these results obtained, it was concluded that the body volume determined from 3-D of Hanwoo could be used as an effective variable for estimating body weight.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.836-846
• /
• 2018

The purpose of this study was to evaluate nursing educational objectives achievement, critical thinking disposition, and clinical competence and their relationships in nurses within five years after graduation. Subjects were 82 nurses who graduated one nursing college within five years and 68 managers in nursing unit of hospital. Questions were given to nurses. They reported their achievement of educational objectives of the nursing college, critical thinking disposition and clinical competence. Nursing unit managers received the same questions to evaluate nurses working at their unit. Data were collected from January to march 2014 and analyzed by descriptive statistics, t-test, ANOVA, Pearson correlation and multiple regression with SPSS/WIN 23.0 program. Mean scores for achievement of educational objectives, critical thinking disposition, and clinical competence were $3.60{\pm}0.60$, $3.46{\pm}0.28$, and $4.17{\pm}0.56$, respectively. Educational objectives achievement showed significant correlations with critical thinking disposition (r = 0.52, p <. 001) and clinical competence (r = 0.52, p < .001). Regression analysis showed that critical thinking disposition (${\beta}=.30$, p = .018) and clinical competence (${\beta}=.26$, p = .029) were significant factors for predicting educational objectives achievement. Manager's evaluation score for educational objectives achievement and clinical competence was higher than graduated nurses' report (p < .001). This could be used as a feed- back to reset educational objectives and upgrade the curriculum. These study results could be used to, establish strategies to improve educational objectives achievement.

• Journal of Advanced Navigation Technology
• /
• v.21 no.4
• /
• pp.353-358
• /
• 2017

In order to reduce the size of the previous stepped slot antenna for UWB applications(3.1 ~ 10.6 GHz) to half, an open ended stepped slot antenna is proposed. The proposed antenna consists of a stepped slot etched on the ground plane as radiation part and a microstrip feed-line with rectangular patch on the top plane for wideband impedance matching. The proposed antenna is designed and fabricated on the FR4 substrate with dielectric constant of 4.3, thickness of 1.6 mm and size of $28.5{\times}32mm^2$. The measured impedance bandwidth (${\mid}S_{11}{\mid}{\leq}-10dB$) of the fabricated antenna is 7.99 GHz(3.01~11 GHz) which is sufficient to cover UWB band (3.1 ~ 10.6 GHz). In particular, it has been observed that antenna has a good omnidirectional radiation patterns and high gain over the entire frequency band of interest even though the size of the proposed antenna is reduced to half when compared with the previous antenna.

• Steel and Composite Structures
• /
• v.36 no.4
• /
• pp.417-426
• /
• 2020

Drilling processes in fiber-reinforced polymer composites are essential for the assembly and fabrication of composite structural parts. The economic impact of rejecting the drilled part is significant considering the associated loss when it reaches the assembly stage. Therefore, this article tends to illustrate the effect of cutting conditions (feed and speed), and laminate thickness on thrust force, torque, and delamination in drilling woven E-glass fiber reinforced epoxy (GFRE) composites. Four feeds (0.025, 0.05, 0.1, and 0.2 mm/r) and three speeds (400, 800, and 1600 RPM) are exploited to drill square specimens of 36.6×36.6 mm, by using CNC machine model "Deckel Maho DMG DMC 1035 V, ecoline". The composite laminates with thicknesses of 2.6 mm, 5.3 mm, and 7.7 mm are constructed respectively from 8, 16, and 24 glass fiber layers with a fiber volume fraction of about 40%. The drilled specimen is scanned using a high-resolution flatbed color scanner, then, the image is analyzed using CorelDraw software to evaluate the delamination factor. Multi-variable regression analysis is performed to present the significant coefficients and contribution of each variable on the thrust force and delamination. Results illustrate that the drilling parameters and laminate thickness have significant effects on thrust force, torque, and delamination factor.