• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1454-1456
• /
• 2007

The electrical and the optical properties of blue organic light-emitting devices (OLEDs) with a multiple emitting layer (EML) acting as electron and hole trapping layers were investigated. While the luminance efficiency of the OLEDs with a multiple EML was very stable, regardless of variations in the applied voltage.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1378-1380
• /
• 2005

The efficiency and the optical properties of the yellow organic light-emitting devices (OLEDs) were significantly affected by the existence of the multiple quantum well (MQW) structures consisting of N, N'- bis-(1-naphthyl)-N, N'-diphenyl-1,1-biphenyl-4,4'- diamine(NPB)/5,6,11,12 - tetraphenylnaphthacene (rubrene). The maximum efficiency and the luminance of OLEDs with 3-periods of the NPB/rubrene MQWs at 41.6 $mA/cm^2$ were 3.66 cd/A and 1524 $cd/m^2$, respectively, and their Commission Internationale de l'Eclairage chromaticity coordinates were (0.34, 0.55), which indicates a yellow color. These results indicate that the efficiencies of the OLEDs by using MQW emitting layers can be improved.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.446-449
• /
• 2008

Organic light emitting diodes (OLEDs) with multiple organic layers were fabricated to obtain and to evaluate an equivalent resistance and an equivalent capacitance of OLED device. The staircase voltage with an increasing period and a constant period was designed and applied to the OLED. The resistance of OLED was found to decrease from $270\;k{\Omega}$ to $2\;K{\Omega}$ as applied voltage increased after turn on. The equivalent capacitance of OLED maintained unchanged at low voltage level and deceased after showing peak value as the applied voltage increased.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1418-1420
• /
• 2008

In this paper, the light emitting efficiency, spectrum, and the lifetime of the phosphorescent devices, whose emission characteristics are strongly dominated not only by the energy transfer but also by the charge carrier trapping induced by the emissive dopant, are explained by differences in the energy levels of the host, dopant, and nearby transport layers. On the basis of our finding on device performance and photocurrent measurement data by time-of-flight (TOF), we investigated the effect of the difference of carrier trapping dopant and properties of the host materials on the efficiency roll-off of phosphorescent organic light emitting diode (OLED), along with a physical interpretation and practical design scheme, such as a multiple host system, for improving the efficiency and lifetime of devices.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.4
• /
• pp.126-129
• /
• 2020

We introduce a lifetime assessment technique using deep learning algorithm with complex electrical parameters such as resistivity, permittivity, impedance parameters as integrated indicators for predicting the degradation of the organic molecules. The evaluation system consists of fully automated in-situ measurement system and multiple layer perceptron learning system with five hidden layers and 1011 perceptra in each layer. Prediction accuracies are calculated and compared depending on the physical feature, learning hyperparameters. 62.5% of full time-series data are used for training and its prediction accuracy is estimated as r-square value of 0.99. Remaining 37.5% of the data are used for testing with prediction accuracy of 0.95. With k-fold cross-validation, the stability to the instantaneous changes in the measured data is also improved.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1747-1749
• /
• 1999

Organic electroluminescent devices (OLEDs) have received a great deal of attention due to their potential application as full-color displays. Europium complexes are known as excellent red color-emitting materials for OLEDs since they show intense photoluminescence at around 610 nm with a sharp spectral bandwidth. In this study, triple-layer and multiple quantum-well structures consisting of Eu$(TTA)_3$(bpy) complex well layer sandwiched triphenyldiamine derivative (TPD) layers were fabricated and their photoluminescent characteristics were investigated. Sharp emission at the wavelength of 615 nm has been observed from the triple-layer and multiple quantum-well structures containing Eu complex. Details on the electrical properties of these structures will be also discussed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.12
• /
• pp.11-17
• /
• 2000

We investigated the growth of InGaN/GaN multiple quantum wells (MQWs) structures which emit blue light. The samples were grown in a low pressure metalorganic chemical vapor deposition system. We examined InGaN/GaN MQWs by varying growth temperatures and thicknesses of InGaN well and GaN barrier layers in MQWs. Especially, the thickness of GaN barrier in InGaN/GaN MQWs was found to severely affect the interfacial abruptness between InGaN well and GaN barrier layers. The higher order satellite peaks in the high resolution x-ray diffraction spectra and the high resolution cross sectional transmission electron microscope image of MQW structrues revealed that the interface between InGaN and GaN layers was very abrupt. Room-temperature photoluminescence spectra also showed a blue emission from InGaN/GaN MQWs at the wavelength of 463.5nm with a narrow full width at half maximum of 72.6meV.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.627-627
• /
• 2013

Recently, most studies concerning inorganic CdSe/ZnS quantum dot (QD)-polymer hybrid LEDs have been concentrated on the structure with multiple layers [1,2]. The QD LEDs used almost CdSe materials for color reproduction such as blue, green and red from the light source until current. However, since Cd is one of six substances banned by the Restriction on Hazardous Substances (RoHS) directive and classified into a hazardous substance for utilization and commercialization as well as for use in life, it was reported that the use of CdSe is not suitable to fabricate a photoelectronic device. In this work, we demonstrate a novel, simple and facile technique for the synthesis of ZnO-graphene quasi-core.shell quantum dots utilizing graphene nanodot in order to overcome Cd material including RoHS materials. Also, We investigate the optical and structural properties of the quantum dots using a number of techniques. In result, At the applied bias 10 V, the device produced bluish-white color of the maximum brightness 1118 cd/$m^2$ with CIE coordinates (0.31, 0.26) at the bias 10 V.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1140-1143
• /
• 2009

Organic Vapor Phase Deposition (OVPD) equipment enables the accurate and simultaneous control of deposition rates of multiple materials as well as their homogenous mixing in the gas phase. Graded or even cross-faded layers by varying carrier gas flow are options to improve OLED performances. As example, we will show how the efficacies of standard red phosphorescent OLEDs with sharp interfaces can be increased from 18.8 cd/A and 14.1 lm/W (1,000 cd/$m^2$) to 36.5 cd/A (+94 %, 18 % EQE) and 33.7 lm/W (+139 %) by the introduction of cross-fading, which is a controlled composition variation in the organic film.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.144-144
• /
• 2008

Blue light emitting diode structures consisting of the InGaN/GaN multiple quantum wells were grown by metalorganic chemical vapor deposition at different growth temperatures for the p-GaN contact layers and the influence of growth temperature on the emission and microstructural properties was investigated. The I-V and electroluminescence measurements showed that the sample with a p-GaN layer grown at $1084^{\circ}C$ had a lower electrical turn-on voltage and series resistance, andenhanced output power despite the low photoluminescence intensity. Transmission electron microscopy (TEM) revealed that the intense electro luminescence was due to the formation of a p-GaN layer with an even distribution of Mg dopants, which was confirmed by TEM image contrast and strain evaluations. These results suggest that the growth temperature should be optimized carefully to ensurethe homogeneous distribution of Mg as well as the total Mg contents in the growth of the p-type layer.