• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.346-348
• /
• 2009

A golden double freesia (Freesia hybrida Hort.) "Golden Amor" was developed from a cross 'Golden Crown' and 'White Wing' followed by seedling and line selections at the National Horticultural Research Institute, Rural Development Administration (RDA) in 2005. Growth and flowering characteristic tests were conducted from 2000 to 2005. "Golden Amor" has large double type flower with bright golden color (RHS 12B). It have multiple florets, good flower shape, upright leaves and stalks. The average yield of "Golden Amor" was 6.0 cuttings per plant in greenhouse carried out from 2003 to 2005. It has good production of cormlets, vigorous growth and resistance to Fusarium and virus. "Golden Amor" would be cultured under greenhouse condition in Korea.

• Journal of Advanced Navigation Technology
• /
• v.27 no.2
• /
• pp.203-208
• /
• 2023

In this study, we propose a method to improve the precision of contact resistance measurement circuits using constant current method and voltage drop method, and implement a dashboard that monitors the measured data of contact resistance measurement systems through MQTT broker server. The contact resistance measurement system measures the resistance value and transmits the measured value to the MQTT broker server using wireless communications. This developed dashboard uses Node-RED and Node-RED-Dashboard to receive the resistance values of up to four contact resistance measurement systems and show them to user's monitor screen. Users can manage multiple measurement data using a single dashboard and easily interface with other devices through the MQTT broker server. Through the experimental results from real data measurements, the relative standard deviation about precision is improved to average 40.37% and maximum 64.73% respectively.

• Journal of muscle and joint health
• /
• v.5 no.2
• /
• pp.265-285
• /
• 1998

This Qualitative nursing research was made with a hermeneutic phenomenological approach to find out the meaning and nature of human's experience. The purpose of the inquiry is to find out the meaning and to understand the nature of Joint pain's experience of women in the island and to apply the result to nursing practice. The study was guided by Shin Kyung Rim's four step that revised van Manen's method for doing research. The method of inquiry included : turning to interesting phenomenon. inquiring and investigating experience as it was lived rather than as conceptualized ; reflecting and analyzing essential themes which characterize phenomenon ; and describing phenomenon through art and literature. Multiple strategies for data collecting were needed : deep face to face interview ; analysis of joint pain of women's writings ; describing and analysis of examples of the phenomenon in art, literature. Through this process essensial them of the experience was emerged : Misery that I would like to cut off my body, Sea wind soaking deeply into the bones, Dull pain from the postpartum cold wind, The another suffer I should endure by myself, Recrudesce despite all the try I have made, Often forgetting the pain of every Joint for hardship of life. Findings from artistic and creative inquiry further was validated and meaning was discovered. The study illuminated meaning and simultaneously validated the phenomenological research process. Essential themes for understanding women joint pain's experience, implications, for education, research and practice, direction and need for continuing inquiry were identified.

• Journal of Fashion Business
• /
• v.18 no.2
• /
• pp.66-79
• /
• 2014

The purpose of this study was to find out the difference between preferred hairstyle and pursued-image of hairstyle according to demographic characteristics. The method of this study is a content analysis and survey research using a questionnaire, which consisted of items of pursued-image of hairstyle, preferred hairstyle and demographic characteristics. 450 women were selected as subjects of this study; they were randomly selected from hair salon located in Seoul, Inchon and Bundang. For the material analysis, We used the statistical program of SPSS 12.0; frequencies, factor nalysis, one-way ANOVA and Duncan's multiple range test, T Test and ${\chi}^2$ Test were carried out as the methods of analysis. The research findings were as follows. First, the results of hairstyles according to the content analysis usually resulted 5 hairstyles, such as cuts and crew cut, bobbed hair, long layered hair styles and nonelayered long hair styles. Second, under the survey regarding the difference of preferred hairstyle and pursued-image of hairstyle according to demographic characteristics. variety of hair styles due to the subjects were more willing to try a consciousness about other's suggestions and how they are portrayed. Moreover a low level of education was ralated to a attempting a variety of styles, considering their social life. Subjects with higher age, education level and salary preferred a glamorous image as well as crew cuts. Which made them look younger. However, when they were younger, they preferred long nonelayered hair styles. In conclusion, age, average monthly income and education level are important variations affecting the property of change in hairstyles and pursued-image of hairstyles.

• Korean Journal of Plant Tissue Culture
• /
• v.27 no.1
• /
• pp.1-6
• /
• 2000

This study was carried out to find the effects of plant growth regulators on callus formation, rooting and shooting from cotyledon explant in oriental me]on. Various combinations of 0.1 mg/L auxins (IAA, NAA) and 0.5, 1.0. 1.5, 2.0 mg/L cytokinins (BA, kinetin, zeatin) were treated to the MS basal medium, respectively. Callus was induced mort effectively as 2,437.0 mg (FW)/explant in MS medium supplemented with 0.1 mg/L NAA and 2.0 mg/L BA, but that was non-embryogenic callus as colored yellow white and broke easily. Root was induced most effectively at a frequency of 98.0% in MS medium supplemented with 0.1 mg/L NAA and 0-5 mg/L kinetin. Shoots formed on cut part of vein at a frequency of 98.0% in MS medium supplemented with 0.1 mg/L IAA and 2.0 mg/L BA, that were multiple shoots. in case of its concentration, BA and lower concentration of IAA and NAA (0.01 and 0.05 mg/L). respectively. shooting ratio was not increased. The result of treatment with BA 0-5 mg/L and IAA 0.1 mg/L, callus induced at a week, and shoot start to form multiple shoots about 3 weeks after inoculation. After 2 times subculture as 2 weeks intervals, divided shoots rooted and developed into intact plantlets at 10 weeks and then that grown normally on pots after acclimatization.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.1
• /
• pp.10-15
• /
• 1999

We have studied a method to design and fabricate the Intermediate Frequency(IF) band pass filter with low shape factor which is used for CDMA base station on the 35°Y-cut X-propagation Quartz substrate. In order to fabricate a device of the low shape factor for the IF SAW filter on this substrate, we employed apodization weighted type interdigital transducer(IDT) as an input and withdrawal weighted type IDT as an output by using impulse modelling method. Also, using the Kaiser-Bessel window function, we have adopted 2200pairs and 1000pairs of input and oueut IDT respectively to minimize the effect of ripple. Furthermore, the width and the space of IDT finger are 3.6 ㎛ and 3.5 ㎛ respectively. Thus, we can have optimal results when the IDT thickness is 6000Å in consideration of the ratio of SAW's wavelength while it's aperture is 2mm for impedance matching. The fabricated SAW filter for CDMA had the property of almost 115.2MHz of a center frequency, less then 1.27MHz of bandwidth, less than 1.3 of shape factor, - l5dB of out band attenuation insertion loss and -45dB of rejection band.

• Journal of the Korean Society of Safety
• /
• v.33 no.3
• /
• pp.15-20
• /
• 2018

There have been a number of major fatal fire accidents in Korea recently. The number of fires in 2017 were 44,178, which is not only increasing number of fires but also increasing in casualties. Particularly, the fire at Jecheon Sports Center, which suffered many casualties, is expected to have a huge impact. The cause of the fire has not been determined yet, but heat waves on the ceiling have also been pointed out. As such, the copper heating waves, which are used as a preventive measure against damage of pipes due to freezing of pipes, etc., always have a fire hazard. To determine the possibility of a flame-resistant heated fire, a positive electric cable product was used to artificially ignite and analyze the results. In case of a short circuit, the external covering of the positive electric cable is damaged, but not short circuit unless the heating material surrounding the wire is damaged. Due to the characteristics of heating cable for preventing copper waves, the chances of insulation becoming more severe due to moisture and temperature changes are higher than normal wires. If the internal heating system is carbonized by insulating deterioration without damage to the outer coating, it is likely to cause trekking, to form a winding loop in the heating materials, and to cause short circuit in the heated materials. For the positive temperature line, if the middle is shorted, the current continues to flow to the short circuit unless the breaker disconnects. Consequently, a heated fire that does not cut off the power immediately may leave multiple marks or cuts.

• Women's Health Nursing
• /
• v.25 no.1
• /
• pp.112-123
• /
• 2019

Purpose: The objective of this study was to investigate the prevalence of antenatal depression in pregnant women and its influencing factors. Methods: With a cross-sectional survey design, a total of 396 pregnant women were recruited from a local obstetrics and gynecology clinic. Measurements included antenatal depression, perceived stress, predictors of depression during pregnancy, and demographic and obstetric characteristics. Results: Mean antenatal depression score was 8.20 (standard deviation=4.95) out of 30, falling into its normal range. However, the prevalence of antenatal depression was 35.9% when cut-point of 9/10 was used. The prevalence of antenatal depression among women in the first trimester was 31.4%. It was slightly increased to 34.9% in the second trimester but significantly increased to 40.5% in the third trimester. In multiple logistic regression analysis, experiencing prenatal anxiety (odds ratio [OR], 4.16), having no job (OR, 2.90), lower self-esteem (OR, 1.62), and higher perceived stress (OR, 1.32) were significant factors influencing antenatal depression. Conclusion: Negative feeling such as feeling anxious, lower self-esteem, and higher perceived stress during pregnancy are key factors affecting antenatal depression. Thus, antenatal nursing intervention focusing on pregnant women's feeling upon their job status is necessary to improve their antenatal psychological well-being.

• Korean Journal of Cognitive Science
• /
• v.28 no.4
• /
• pp.315-328
• /
• 2017

Even though assessment using information and communication technology will most likely lead the future of educational assessment, there is little domestic research on this topic. Computerized assessment will not only cut costs but also measure students' performance in ways not possible before. In this context, this study introduces a tool which can overcome the problems of multiple choice tests, which are most widely used type of assessment in current Korean educational setting. Multiple-choice tests, in which options are presented with the questions, are efficient in that grading can be automated; however, they allow for students who don't know the answer, to find the correct answer from the options. Park(2005) has developed a modified multiple-choice testing system (CMMT) using the interactivity of computers, that presents questions first, and options later for a short time when the student requests for them. The present study was conducted to find out if penalizing wrong answers could lower the possibility of students choosing an answer among the options when they don't know the correct answer. 116 students were tested with the directions that they will be penalized for wrong answers, but not for no response. There were 4 experimental conditions: 2 conditions of high or low percentage of penalizing, each in traditional multiple-choice or CMMT format. The results were analyzed using a two-way ANOVA for the number of no response, the test score and self-report score. Analysis showed that the number of no response was significantly higher for the CMMT format and that test scores were significantly lower when the penalizing percentage was high. The possibility of applying CMMT format tests while penalizing wrong answers in actual testing settings was addressed. In addition, the need for further research in the cognitive sciences to develop computerized assessment tools, was discussed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.98-105
• /
• 2017

In this study, the fiber blending ratio and strain rate effect on the tensile behavior of hybrid fiber reinforced cement composite was evaluated. Hooked steel fiber and polyvinyl alcohol fiber were used for reinforcing fiber. The fiber blending ratio of HSF+PVA were 1.5+0.5, 1.0+1.0 and 0.5+1.5vol.%. As a results, the tensile strength, strain capacity and fracture toughness of the hooked steel fiber reinforced cement composites were improved by the increase of the bond strength of the fiber and the matrix according to increase of strain rate. However, the tensile stress sharply decreased after the peak stress because of the decrease in the number of straightened pull-out fibers by micro cracks in the matrix around hooked steel fiber. On the other hand, PVA fiber showed cut-off fracture at strain rate $10^{-6}/s$ with multiple cracks. However, at the strain rate $10^1/s$, the multiple cracks and strain capacity were decreased because of the pull-out fracture of PVA fiber. The HSF1.5PVA0.5 shown the highest tensile strength because the PVA fiber suppressed the micro cracks in the matrix around the hooked steel fiber and improved the pull-out resistance of hooked steel fiber. Thus, DIF of strain capacity and fracture toughness of HSF1.5PVA were greatly improved. In addition, the synergistic response of fracture toughness was positive because the tensile stress was slowly decreased after the peak stress by improvement of the pull-out resistance of hooked steel fiber at strain rate $10^1/s$.