• Journal of Information Processing Systems
• /
• v.14 no.6
• /
• pp.1347-1360
• /
• 2018

Owing to limited energy in wireless devices power saving is very critical to prolong the lifetime of the networks. In this regard, we designed a cross-layer optimization mechanism based on power control in which source node broadcasts a Route Request Packet (RREQ) containing information such as node id, image size, end to end bit error rate (BER) and residual battery energy to its neighbor nodes to initiate a multimedia session. Each intermediate node appends its remaining battery energy, link gain, node id and average noise power to the RREQ packet. Upon receiving the RREQ packets, the sink node finds node disjoint paths and calculates the optimal power vectors for each disjoint path using cross layer optimization algorithm. Sink based cross-layer maximal minimal residual energy (MMRE) algorithm finds the number of image packets that can be sent on each path and sends the Route Reply Packet (RREP) to the source on each disjoint path which contains the information such as optimal power vector, remaining battery energy vector and number of packets that can be sent on the path by the source. Simulation results indicate that considerable energy saving can be accomplished with the proposed cross layer power control algorithm.

• The KIPS Transactions:PartC
• /
• v.12C no.7 s.103
• /
• pp.1031-1038
• /
• 2005

As the research on home network technologies, sensor network technologies, and ubiquitous network technologies makes rapid progresses, wireless ad-hoc network have attracted a lot of attention. A wireless ad-hoc network is a temporary network formed by a collection of wireless mobile nodes without the aid of my existing network infrastructure or centralized administration, and it is suitable for ubiquitous computing environments. In this paper, we suggest an interconnection scheme between the wireless ad-hoc network environment based on multiple path source routing protocol and a Mobile-IP based network environment. This scheme reduces the overhead of route re-establishment and re-registration by maintaining multiple paths between the mobile host in wireless ad-hoc network and the base station in mobile-IP network. Also it puts the base station in charge of function that performs translation between wireless ad-hoc network packets and Mobile-IP packets, reducing the load of mobile hosts. In this paper, our simulations show that our scheme outperforms existing interconnecting schemes with regards to throughput and end-to-end delay Also we show that our scheme outperforms multi-paths approach using disjoint routes with regards to routing overhead.

• The KIPS Transactions:PartC
• /
• v.15C no.2
• /
• pp.79-86
• /
• 2008

MANET(Mobile Ad hoc Network) is a collection of two or more nodes equipped with wireless communications and constrained by the factor of energy limitation. The running out of energy on some nodes may bring down the performance of network seriously. For solving the problems above, this paper uses completely separated Node-Disjoint multipaths from a source to a destination as many as possible. And, based on average, minimum or variance of energy values on the each multipath, the packets are distributed on paths. Generally, collecting methods for energy information can be classified into two main categories, Static and Dynamic. As the different energy values collected, the packet distribution methods are classified into six criteria, Static-Average, Static-Minimum, Static-Variance, Dynamic-Average, Dynamic-Minimum and Dynamic-Variance respectively. The performance of the packet distribution methods and that of AODV are compared by NS2 simulation.

• Journal of information and communication convergence engineering
• /
• v.10 no.3
• /
• pp.231-236
• /
• 2012

For real-time wireless sensor network applications, it is essential to provide different levels of quality of service (QoS) such as reliability, low latency, and fault-tolerant traffic control. To meet these requirements, an (m,k)-firm based real-time routing protocol has been proposed in our prior work, including a novel local transmission status indicator called local DBP (L_DBP). In this paper, a fault recovery scheme for (m,k)-firm real-time streams is proposed to improve the performance of our prior work, by contributing a delay-aware forwarding candidates selection algorithm for providing restricted redundancy of packets on multipath with bounded delay in case of transmission failure. Each node can utilize the evaluated stream DBP (G_DBP) and L_DBP values as well as the deadline information of packets to dynamically define the forwarding candidate set. Simulation results show that for real-time service, it is possible to achieve both reliability and timeliness in the fault recovery process, which consequently avoids dynamic failure and guarantees meeting the end-to-end QoS requirement.

• The KIPS Transactions:PartC
• /
• v.15C no.5
• /
• pp.329-342
• /
• 2008

The Sensor Networks have limitations in utilizing energies, developing energy-efficient routing protocol and secure routing protocol are important issues in Sensor Network. In the field of data management, Tributaries and Deltas(TD) which incorporates tree topology and multi-path topology effectively have been suggested to provide efficiency and robustness in data aggregation. And our research rendered hierarchical property to TD and proposed Clustering-based Tributaries-Deltas. Through this new structure, we integrated efficiency and robustness of TD structure and advantages of hierarchical Sensor Network. Clustering-based Tributaries-Deltas was proven to perform better than TD in two situations through our research. The first is when a Base Station (BS) notices received information as wrong and requests the network's sensing data retransmission and aggregation. And the second is when the BS is mobile agent with mobility. In addition, we proposed key establishment mechanism proper for the newly proposed structure which resulted in new Sensor Network structure with improved security and energy efficiency as well. We demonstrated that the new mechanism is more energy-efficient than previous one by analyzing consumed amount of energy, and realized the mechanism on TmoteSKY sensor board using TinyOS 2.0. Through this we proved that the new mechanism could be actually utilized in network design.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.2
• /
• pp.49-56
• /
• 2011

One of the most important VANET applications is providing active safety by broadcasting emergency messages. In order to prevent broadcast storm of flooding-based broadcasting scheme in which any node receiving message will rebroadcast, the existing protocols use the different methods to limit the number of relay nodes. Nevertheless, the existing protocols have low delivery ratio with high traffic density and cause message overhead. Currently, the dramatic increase in the number of vehicles equipped with Global Positioning System (GPS) and onboard radar created new application scenarios that were not feasible before. Consequently, we proposed a broadcasting protocol that selects relay node by using GPS-based position information and detecting neighboring vehicles with the help of onboard radar to. Simulation results show that our proposed protocol has better performance than the existing schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11B
• /
• pp.792-803
• /
• 2005

Ultra wide band (UWB) technology will be applied in the high rare wireless personal area networks (WPANs) for its high rate, low power, and innate immunity to multipath fading. In this paper, a power aware multi-hop packet relay MAC protocol in UWB based WPANs is proposed and a power aware path status factor (PAPSF), which is derived from SINR and power resource condition of each device, is used to select a suitable relay node. Compared with relaying by piconet coordinator (PNC), which is easily chosen by other ad hoc routing protocol, the new scheme can achieve hi임or throughput, decrease the time required for transmitting high power signal and we can easily distribute the battery power consumption from PNC to other devices in the piconet to prevent the PNC device using up its battery too fast and finally avoid PNC handover too frequently.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.9
• /
• pp.169-177
• /
• 2024

Industrial Wireless Sensor Network (IWSN) is a key feature of Industrial IoT that enables industrial automation through process monitoring and control by connecting industrial equipment such as sensors, robots, and machines wirelessly, and must support the strict requirements of modern industrial environments such as real-time, reliability, and energy efficiency. To achieve these goals, IWSN uses reliable communication methods such as multipath routing, fixed redundant resource allocation, and non-contention-based scheduling. However, the issue of wasting redundant resources that are not utilized for communication degrades not only the efficiency of limited radio resources but also the energy efficiency. In this paper, we propose a scheme that utilizes reinforcement learning in communication scheduling to periodically identify unused wireless resources and reallocate them to save energy consumption of the entire industrial network. The experimental performance evaluation shows that the proposed approach achieves about 30% improvement of resource efficiency in scheduling compared to the existing method while supporting high reliability. In addition, the energy efficiency and latency are improbed by more than 21% and 38%, respectively, by reducing unnecessary communication.

• Journal of Korea Multimedia Society
• /
• v.11 no.10
• /
• pp.1446-1459
• /
• 2008

In an infrastructure-based wireless network, an access point is used for all communications among mobile devices. However, when a mobile device moves into a dead Bone, a connectivity disruption between the mobile device and the access point occurs. Such connectivity disruption consequently leads to another connectivity disruption between the mobile device moving toward the dead zone and other wireless-enabled devices located within the area of the infrastructure-based wireless network. To cope with the connectivity disruption in the infrastructure-based wireless network the ad hoc network that dynamically forms a network without any preexisting communication infrastructure needs to be set up to provide seamless connections among mobile devices. In this paper, we propose the DNSQ-MAC (Dynamic Network State aware QoS-Medium Access Control) technique that meets the deadlines of MAC frames forwarded over hop-by-hop multipaths and guarantees the QoS performance of an ad hoc-based wireless network. Mobile devices incorporating the DNSQ-MAC technique are capable of adjusting to the new dynamic network status in order to enhance the QoS performance in the ad hoc-based wireless network. A case study which exploits the Qualnet simulator shows that the proposed DNSQ-MAC technique can guarantee the deadlines of MAC frames forwarded over hop-by-hop multipaths and enhance the QoS performance of various routing protocols and packet schedulers running on the network layer above the MAC layer.