• 디지털산업정보학회논문지
• /
• 제11권3호
• /
• pp.79-90
• /
• 2015

Multipath routing technique is recognized as one of the effective approaches to improve the reliability of data forwarding. However, the traditional multipath routing focuses only on how many paths are needed to ensure a desired reliability. For this purpose, the protocols construct additional paths and thus cause significant energy consumption. These problems have motivated the study for the energy-efficient and reliable data forwarding. Thus, this paper proposes an energy-efficient concurrent multipath routing protocol with a small number of paths based on interaction between paths. The interaction between paths helps to reinforce the multipath reliability by making efficient use of resources. The protocol selects several nodes located in the radio overlapped area between a pair of paths as bridge nodes for the path-interaction. In order to operate the bridge node efficiently, when the transmission failure has detected by overhearing at each path, it performs recovery transmission to recover the path failure. Simulation results show that proposed protocol is superior to the existing multipath protocols in terms of energy consumption and delivery reliability.

• 대한임베디드공학회논문지
• /
• 제14권4호
• /
• pp.177-186
• /
• 2019

In wireless sensor networks, the transmission success ratio would be decreased when the scale of the WSNs increased. To defeat this problem, we propose a multipath routing based on opportunistic routing for improving end-to-end reliability in large-scale wireless sensor networks. The proposed scheme exploits the advantages of existing opportunistic routing and achieves high end-to-end success ratio by branching like a multipath routing through local decision without information of the whole network. As a result of the simulation result, the proposed scheme shows a similar or higher end-to-end transmission success ratio and less energy consumption rather than the existing scheme.

• 한국통신학회논문지
• /
• 제35권12A호
• /
• pp.1160-1170
• /
• 2010

기존의 다중경로 설정 방법은 소스로부터 목적지까지 명확하게 분리된 다중경로를 보장하지 못할 뿐만 아니라, 다중경로의 라우팅 정보를 설정하고 유지하기 위한 오버헤드가 많다. 본 논문에서는 다중경로를 설정하는 과정에서 플러딩 방식을 제거하고, 트래픽 부하를 분산시키며, 경로 갱신에 참여하는 노드의 수를 최소화함으로써, 에너지 효율적인 EDM(Explicit Disjoint Multipath) 방식을 제안한다. EDM은 논리적으로 다중경로가 구성될 수 있는 논리적인 파이프라인을 구성하고, 물리적으로 파이프라인을 통해 목적지까지 경유지 기반 지오그래픽 라우팅을 수행한다. EDM은 네트워크 트래픽 부하를 분산시키고, 에너지 소모를 균등화할 수 있으며, 네트워크 생명주기를 연장시킬 수 있다.

• International Journal of Computer Science & Network Security
• /
• 제23권8호
• /
• pp.121-136
• /
• 2023

Wireless Sensor Networks (WSNs) have many potential applications and unique challenges. Some problems of WSNs are: severe resources' constraints, low reliability and fault tolerant, low throughput, low scalability, low Quality of Service (QoS) and insecure operational environments. One significant solution against mentioned problems is hierarchical and clustering-based multipath routing. But, existent algorithms have many weaknesses such as: high overhead, security vulnerabilities, address-centric, low-scalability, permanent usage of optimal paths and severe resources' consumption. As a result, this paper is proposed an energy-aware, congestion-aware, location-based, data-centric, scalable, hierarchical and clustering-based multipath routing algorithm based on Numerical Taxonomy technique for homogenous WSNs. Finally, performance of the proposed algorithm has been compared with performance of LEACH routing algorithm; results of simulations and statistical-mathematical analysis are showing the proposed algorithm has been improved in terms of parameters like balanced resources' consumption such as energy and bandwidth, throughput, reliability and fault tolerant, accuracy, QoS such as average rate of packet delivery and WSNs' lifetime.

• 정보처리학회논문지C
• /
• 제12C권3호
• /
• pp.429-436
• /
• 2005

모바일 애드혹 네트워크(MANET)는 어떤 고정 기반구조나 중앙 집중형 관리 구조를 갖지 않는 모바일 노드의 집합으로 구성된다. AODV (Ad hoc On-demand Distance Vector routing)는 MANET용 온디맨드(on-demand) 라우팅 프로토콜로서, IETF (Internet Engineering Task Force)의 MANET 워킹 그룹에 제출된 기고문(Internet Draft)이다. 본 논문에서는 최대의 노드 비중첩 및 링크 비중첩을 제공하고, AODV 프로토콜은 물론 기존의 AODV 기반 다중경로 프로토콜보다 성능이 우수한 새로운 최대 비중첩 다중경로 AODV (MDAODV) 프로토콜을 제안한다. 본 연구의 핵심 아이디어는 경로 요청(RREQ:Route REQuest) 메시지에 소스 라우팅(source routing) 주소 정보를 추가시켜 확장하는 것과 수신 노드가 일정 시간 동안 도착한 다수의 RREQ를 조사하여 2개의 경로를 선택하는 것이다. 제안한 MDAODV 프로토콜은 기존 다중경로 라우팅 프로토콜에 비해 높은 신뢰성과 우수한 견고성을 갖는 경로를 제공할 뿐만 아니라, 수신 노드에서 경로를 결정하므로 중간 노드에서의 오버헤드를 감소시킨다. 성능평가 결과에 의하면, 제안한 MDAODV 프로토콜은 기존의 AODV 기반 다중경로 프로토콜보다 패킷 전달율과 평균 지연시간의 측면에서 성능이 우수한 반면 라우팅 오버헤드는 오히려 감소하는 경향을 나타낸다.

• 한국멀티미디어학회논문지
• /
• 제13권6호
• /
• pp.849-864
• /
• 2010

This paper proposes a multipath routing protocol called cross-layer multipath AODV (CM-AODV) for wireless ad hoc networks, which selects multiple routes on demand based on the signal-to-interference plus noise ratio (SINR) measured at the physical layer. Note that AODV (Ad hoc On-demand Distance Vector) is one of the most popular routing protocols for mobile ad hoc networks. Each time a route request (RREQ) message is forwarded hop by hop, each forwarding node updates the route quality which is defined as the minimum SINR of serialized links in a route and is contained in the RREQ header. While achieving robust packet delivery, the proposed CM-AODV is amenable to immediate implementation using existing technology by neither defining additional packet types nor increasing packet length. Compared to the conventional multipath version of AODV (which is called AOMDV), CM-AODV assigns the construction of multiple paths to the destination node and makes it algorithmically simple, resulting in the improved performance of packet delivery and the less overhead incurred at intermediate nodes. Our performance study shows that CM-AODV significantly outperforms AOMDV in terms of packet delivery ratio and average end-to-end delay, and results in less routing overhead.

• Journal of Communications and Networks
• /
• 제17권4호
• /
• pp.406-418
• /
• 2015

Cognitive radio networks (CRNs) have emerged as a promising solution to the problem of spectrum under utilization and artificial radio spectrum scarcity. The paradigm of dynamic spectrum access allows a secondary network comprising of secondary users (SUs) to coexist with a primary network comprising of licensed primary users (PUs) subject to the condition that SUs do not cause any interference to the primary network. Since it is necessary for SUs to avoid any interference to the primary network, PU activity precludes attempts of SUs to access the licensed spectrum and forces frequent channel switching for SUs. This dynamic nature of CRNs, coupled with the possibility that an SU may not share a common channel with all its neighbors, makes the task of multicast routing especially challenging. In this work, we have proposed a novel multipath on-demand multicast routing protocol for CRNs. The approach of multipath routing, although commonly used in unicast routing, has not been explored for multicasting earlier. Motivated by the fact that CRNs have highly dynamic conditions, whose parameters are often unknown, the multicast routing problem is modeled in the reinforcement learning based framework of learning automata. Simulation results demonstrate that the approach of multipath multicasting is feasible, with our proposed protocol showing a superior performance to a baseline state-of-the-art CRN multicasting protocol.

• 한국항행학회논문지
• /
• 제18권3호
• /
• pp.236-241
• /
• 2014

이동 에드혹 네트워크에서는 소스 노드로 부터 목적지 노드까지 데이터 전달을 위해 멀티 홉 전송방식을 사용하며 이때 전송경로를 설정하는 라우팅 기법이 중요한 기술적 이슈가 된다. 각 노드들의 위치 변경 및 채널환경의 변화에 따라 노드들 사이의 무선링크가 불안정해 질 수 있으며 이는 링크에러를 증가시키게 된다. 이와 같은 문제를 해결하기 위해 다중경로 라우팅기법이 제안되었다. 다중경로 라우팅은 데이터를 분산 전송하여 특정 링크에서의 혼잡을 줄이고 데이터의 전송효율을 증가시킬 수 있다. 그러나 다중경로 라우팅에서 각각의 경로는 서로 간섭을 야기할 수 있으며 이는 네트워크의 성능을 크게 저하시킬 수 있다. 본 논문에서는 이동 에드혹 네트워크에 적용가능한 다중경로 라우팅기법을 제안하다. 제안된 방식에서는 노드의 위치정보 없이도 경로 간 간섭을 회피할 수 있도록 설계되었다. 시뮬레이션을 통해 제안된 다중경로 라우팅 기법이 전송지연과 에러를 크게 감소시킬 수 있음을 확인하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권2호
• /
• pp.271-287
• /
• 2013

We propose a new multipath-based reliable routing protocol on MANETs, Multipath-based Reliable routing protocol with Fast-Recovery of failures (MRFR). For reliable message transmission, MRFR tries to find the most reliable path between a source and a destination considering the end-to-end packet reception reliability of the routes. The established path consists of a primary path that is used to transmit messages, and the secondary paths that are used to recover the path when detecting failures on the primary path. After establishing the path, the source transmits messages through the primary path. If a node detects a link failure during message transmission, it can recover the path locally by switching from the primary to the secondary path. By allowing the intermediate nodes to locally recover the route failure, the proposed protocol can handle the dynamic topological change of the MANETs efficiently. The simulation result using the QualNet simulator shows that the MRFR protocol performs better than other protocols in terms of the end-to-end message delivery ratio and fault-tolerance capability.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권12호
• /
• pp.3081-3099
• /
• 2012

We propose a new multipath-based reliable routing protocol on MANETs, Multipath-based Reliable routing protocol with Fast-Recovery of failures (MRFR). For reliable message transmission, MRFR tries to find the most reliable path between a source and a destination considering the end-to-end packet reception reliability of the routes. The established path consists of a primary path that is used to transmit messages, and the secondary paths that are used to recover the path when detecting failures on the primary path. After establishing the path, the source transmits messages through the primary path. If a node detects a link failure during message transmission, it can recover the path locally by switching from the primary to the secondary path. By allowing the intermediate nodes to locally recover the route failure, the proposed protocol can handle the dynamic topological change of the MANETs efficiently. The simulation result using the QualNet simulator shows that the MRFR protocol performs better than other protocols in terms of the end-to-end message delivery ratio and fault-tolerance capability.