• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.4
• /
• pp.267-275
• /
• 2018

The reference stations in a satellite-based augmentation system (SBAS) collect raw data from global navigation satellite system (GNSS) to generate correction and integrity information. The multipath signals degrade GNSS raw data quality and have adverse effects on the SBAS performance. The currently operating SBASs (WAAS and EGNOS, etc.) survey existing commercial equipment to perform multipath assessment around the antennas. For the multi-path assessment, signal power of GNSS and multipath at the MEDLL receiver of NovAtel were estimated and the results were replicated by a ratio of signal power estimated at NovAtel Multipath Assessment Tool (MAT). However, the same experiment environment used in existing systems cannot be configured in reference stations in Korean augmentation satellite system (KASS) due to the discontinued model of MAT and MEDLL receivers used in the existing systems. This paper proposes a test environment for multipath assessment around the antennas in KASS Multipath Assessment Tool (K-MAT) for multipath assessment. K-MAT estimates a multipath error contained in the code pseudorange using linear combination between the measurements and replicates the results through polar plot and histogram for multipath assessment using the estimated values.

• ETRI Journal
• /
• v.42 no.1
• /
• pp.108-117
• /
• 2020

This study proposes a robust range-only beacon mapping method for registering the locations of range-only beacons automatically. The proposed method deals with the multipath propagation of signals from range-only beacons using the range-only measurement association (RoMA) and an unscented Kalman filter (UKF). The RoMA initially predicts the candidate positions of a range-only beacon. The location of the range-only beacon is then updated using the UKF. With the proposed method, the locations of range-only beacons are accurately estimated in a multipath environment. The proposed method also provides the location uncertainty of each range-only beacon. Simulation results using the model for multipath propagation and experimental results in a real indoor environment verify the performance of the proposed method.

• Journal of Advanced Navigation Technology
• /
• v.28 no.1
• /
• pp.155-158
• /
• 2024

Multipath, a major error source in urban GNSS positioning (global navigation satellite system), pose a challenge due to its site-dependent nature, varying with the user's signal reception environment. In our previous study, we introduced a technique generating GNSS multipath map in urban canyon. However, due to uncertainty in initial GNSS positions, applying multipath maps required generating multiple candidate positions. In this study, we present an efficient method for applying multipath maps by projecting the multipath correction in position domain. This approach effectively applies multipath maps, addressing the challenges posed by urban user position uncertainties.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.97-100
• /
• 2001

The performance of mobile radio communication system is dependent on various factors such as channel environment. Especially, the number of multipath components of mobile radio channel and multipath delay property in CDMA system for different bandwidths are changed. Therefore, using multipath components, Rake receiver provides improvement of performance of W-CDMA system is evaluated by computer simulation over the types of ITU-R wideband channel model and spreading rate. The result shows that the performance of CDMA adapting RAKE receiver is Improved by the increase of multipath components in equal level of the received power.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.557-565
• /
• 2018

For GNSS navigation in urban environment, a novel short delay multipath mitigation algorithm is proposed in this paper. This algorithm detects which satellite's signal is the multipath signal by using the constraint that GNSS receiver is equipped in a ground vehicle, then estimate new position after separating the measurement of that satellite. A criterion for detecting and validating the multipath signal depends on the performance grade of the GNSS receiver and the dynamics of the vehicle. In order to evaluate the proposed algorithm, the real data had been collected at the multipath environment of 4 scenarios. By post-processing the real data with both of the multipath mitigation algorithm in the receiver and the proposed algorithm, it can be checked that the position errors were less than 5 meters except the case that the number of visible satellite is lower than 5.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11A
• /
• pp.876-882
• /
• 2003

The future wireless communication systems will use spatial multiplexing with Multiple Input Multiple Output(MIMO) system to take advantage of large channel capacity gains. In such systems it will be desirable to select a sub-set of available transmit or receive antennas to reduce cost and complexity. In this paper we propose a novel antenna selection schemes for MIMO systems be suitable for multipath environment. Also, we analyze the capacity and define the outage probability for a novel antenna selection schemes for MIMO systems in multipath environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.1 no.1
• /
• pp.95-104
• /
• 1997

This paper deals with an analysis of multipath which affect a transmission performance in underwater acoustic channel. For the test of autonomous underwater vehicle(AUV), underwater acoustic channel with multipath structure is introduced to mathmatical modelling for a basin environment. In this paper, SMR(Signal to Multipath Ratio) which is defined as a parameter of mulipath's effect is presented as a mathmatical equation, and the equation or SMR is simulated by MATLAB program.

• The Journal of Korea Robotics Society
• /
• v.6 no.1
• /
• pp.58-68
• /
• 2011

This paper proposes a technique of indoor localization for mobile robot by so called indoor GPS and EKF. Basically the concept of indoor GPS is similar outdoor GPS, and the indoor GPS gets distances between Anchors and Tag by a ranging method of CSS and then estimates the coordinate by distances and known Anchor positions. After we performed performance test of indoor GPS system in ideal and multipath environment, we configured that the indoor GPS has internal error factors and external error factors. This paper handled a multipath problem belonging to external error factors. At first various direct physical method are introduced to fix the multipath problems, and as expected we got errors corrected considerably. And then the method of selective anchors for indoor GPS is applied. With these two level improvement of indoor GPS performance, EKF(Extended Kalman Filter) is applied to mobile robot in indoor environment. The usefulness of the proposed methods are shown by a series of experiments in a environment giving contaminated data by multipath.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.3
• /
• pp.638-648
• /
• 2013

Together with the GPS-based approach, geo-location through mobile communication networks is a key technology for location-based service. To save the cost, most geo-location system is implemented on the existed network service, which has a cellular structure. Still, multilateration is limited in cellular structure because it is difficult for the mobile terminal to acquire distance measurements from multiple base stations. This low hearability in the receiver is caused by co-channel interference and multipath environment. Therefore, hearability enhancement is necessary for multilateration under multipath and interference environment. Former time domain based hearability methods were designed for real signals. However, orthogonal frequency division multiplexing (OFDM) signal, which its usage has been increased in digital wireless communication, is a complex signal. Thus, different hearability enhancement method is needed for OFDM signals. This paper proposes a hearability enhancement method for forward-link multilateration using OFDM signals, which employ interference cancellation and multipath mitigation. A novel interference cancellation and multipath mitigation strategy for complex-valued OFDM signals is presented that has an iterative structure. Simulation results show that the proposed multilateration method provides the user's position with an accuracy of less than 80m through the mobile WiMAX cellular network in multipath environment.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.2
• /
• pp.182-188
• /
• 2014

Source localization is an important problem in the field of sonar and radar, etc. For the purpose of source localization, two or more spatially separated sensors are often used to measure the time difference of arrivals of a radiating source whose transmitted signal waveform is unknown. The NLS(Nonlinear Least Square) cost function with curve fitting method was proposed recently, which provide robust source localization performance by reducing estimation ambiguity. However, even this algorithm shows degraded performance in a multipath environment. To estimates source localization correctly, source localization algorithm that eliminate the effect of multipath signals is required. In this paper, PMP(Power Matching Procedure) is added to the algorithm, which provides improved source localization performance by properly cutting out the effect of multipath signals. Through simulation the performance of the proposed source localization algorithm is verified.