• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.768-773
• /
• 2020

In large-scale land development for the rational use and management of national land resources, the use of geospatial information is essential for the efficient management of projects. Recently, drone LiDAR (Light Detection And Ranging) has attracted attention as an effective geospatial information construction technique for large-scale development areas, such as housing site construction and open-pit mines. Drone LiDAR can be classified into a method using SLAM (Simultaneous Localization And Mapping) technology and a GNSS (Global Navigation Satellite System)/IMU (Inertial Measurement Unit) method. On the other hand, there is a lack of analytical research on the application of drone LiDAR or the characteristics of each method. Therefore, in this study, data acquisition, processing, and analysis using SLAM and GNSS/IMU type drone LiDAR were performed, and the characteristics and utilization of each were evaluated. As a result, the height direction accuracy of drone LiDAR was -0.052~0.044m, which satisfies the allowable accuracy of geospatial information for mapping. In addition, the characteristics of each method were presented through a comparison of data acquisition and processing. Geospatial information constructed through drone LiDAR can be used in several ways, such as measuring the distance, area, and inclination. Based on such information, it is possible to evaluate the safety of large-scale development areas, and this method is expected to be utilized in the future.

• Journal of Advanced Navigation Technology
• /
• v.13 no.6
• /
• pp.916-925
• /
• 2009

4S (Ship to Ship, Ship to Shore) communication is the key to strategic development of e-navigation, a core element of IT vessel convergence. 4S communication is intended to integrate and standardize various communication infrastructures on land and communication equipment complying with communication equipment equipped in ships. This paper aims to apply the Korean technology IEEE 802.16e adopted as an international standard, to replace and compensate for existing vessel communication media such as low speed HF/MF/VHF to the ocean environment. To this end, various experimental conditions between the coast station where a relay station was installed and related equipment equipped on a ship are set. Communication signals were monitored and the RSSI and CINR were measured. Based on experimental analysis and results, various challenges and solutions which may occur in ocean environment were sought, and communication availability was analyzed through transmission data throughput, at the maximum effective distance range of the signal. It was proven that high speed multimedia data could be exchanged for up to 20 km even among 80km kph ships moving around near the sea, ensuring that this technology could be applied to the ocean environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.5
• /
• pp.555-564
• /
• 2016

This paper proposes a time slot allocation scheme for military patrol environments. This proposal comes from analysis of traffic properties in a military patrol environment. In the near future, robots are expected to explore enemy grounds and measure threat, taking the place of human patrol. In order to control such robots, control messages must be extremely accurate. One mistake from the control center could cause a tragedy. Thus, high reliability must be guaranteed. Another goal is to maintain a continual flow of multimedia data sent from patrol robots. That is, QoS (Quality of Service) must be guaranteed. In order to transmit data while fulfilling both attributes, the per-path based centralized TDMA slot allocation scheme is recommended. The control center allocates slots to robots allowing synchronization among robots. Slot allocation collisions can also be avoided. The proposed scheme was verified through the ns-3 simulator. The scheme showed a higher packet delivery ratio than the algorithm in comparison. It also performed with shorter delay time in the downlink traffic transmission scenario than the algorithm in comparison.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.638-643
• /
• 2017

The 3D laser scanner operates by measuring the distance from the sensor to the target and operates on the same principle as Electronic Distance Measuring (EDM). Recently, 3D laser scanning technology has been rapidly developed in line with the strongly increasing demand for 3D information acquisition. Therefore, it is now possible to more easily acquire geometric information of various objects existing in real space. In this study, we constructed geospatial information by using new equipment which integrated 3D laser scanner and total station, and we suggest the possibility of using new technology for geospatial information construction by comparing and analyzing with existing methods. In the study result, we demonstrated the efficiency of the geospatial information constructed by integration of 3D laser scanner and total station. The proposed method is expected to shorten the time required for data acquisition compared to the existing method using the existing total station. Furthermore, it is possible to use various methods such as cross section analysis and volume calculation using the acquired data. In the future, spatial information construction by integration of 3D laser scanner and total station will help improve work efficiency in related fields.

• Journal of KIISE
• /
• v.44 no.7
• /
• pp.658-667
• /
• 2017

The demand for large-scale storage systems has continued to grow due to the emergence of multimedia, social-network, and big-data services. In order to improve the response time and reduce the load of such large-scale storage systems, DRAM-based in-memory cache systems are becoming popular. However, the high cost of DRAM severely restricts their capacity. While the method of compressing cache entries has been proposed to deal with the capacity limitation issue, compression and decompression, which are technically difficult to parallelize, induce significant processing overhead and in turn retard the response time. A selective compression scheme is proposed in this paper for in-memory file system caches that rapidly estimates the compression ratio of incoming cache entries with their Shannon entropies and compresses cache entries with low compression ratio. In addition, a description is provided of the design and implementation of an in-kernel in-memory file system cache with the proposed selective compression scheme. The evaluation showed that the proposed scheme reduced the execution time of benchmarks by approximately 18% in comparison to the conventional non-compressing in-memory cache scheme. It also provided a cache hit ratio similar to the all-compressing counterpart and reduced 7.5% of the execution time by reducing the compression overhead. In addition, it was shown that the selective compression scheme can reduce the CPU time used for compression by 28% compared to the case of the all-compressing scheme.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1573-1579
• /
• 2010

In this paper, we studied efficient design of wireless transmission system for unified data transmission in a subway and railway. It is increased that need of broadband multimedia service to make useful environment for users and to support the operation of railway system. High bandwidth is better if we need more services. But, high bandwidth requires more cost at tunnel of subway. And more bandwidth makes received antenna sensitivity bad. So it needs more wireless stations. We deduced best bandwidth for subway wireless transmission system using the cost of installation and efficiency of system. Consequently, we proposed efficient service model for broadband wireless system at a subway. Subway broadband wireless transmission system is testing and extended to province subway. The cost of subway broadband wireless transmission system is saved, because the system can be efficiently designed using proposed service model. Therefore, the effectiveness of it will be expected to be very big.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.211-218
• /
• 2015

This paper introduces a 'divide-and-conquer' algorithm to the travelling salesman problem (TSP). Top 10n are selected beforehand from a pool of n(n-1) data which are sorted in the ascending order of each vertex's distance. The proposed algorithm then firstly selects partial paths that are interconnected with the shortest distance $r_1=d\{v_i,v_j\}$ of each vertex $v_i$ and assigns them as individual regions. For $r_2$, it connects all inter-vertex edges within the region and inter-region edges are connected in accordance with the connection rule. Finally for $r_3$, it connects only inter-region edges until one whole Hamiltonian cycle is constructed. When tested on TSP-1(n=26) and TSP-2(n=42) of real cities and on a randomly constructed TSP-3(n=50) of the Euclidean plane, the algorithm has obtained optimal solutions for the first two and an improved one from that of Valenzuela and Jones for the third. In contrast to the brute-force search algorithm which runs in n!, the proposed algorithm runs at most 10n times, with the time complexity of $O(n^2)$.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.243-246
• /
• 2013

Recently, the 4th generation of mobile communications in Korea with anyone supports was supported high speed multimedia communication services. With the launch of Apple iPhone, there is an explosion of interest in Smartphone itself as well as Internet-based services using Smartphone are being revitalized. Smartphone users, opinion experts almost of the economically active population is using, it has reached the saturation past the early stages of formation. In 1989, the 1st generation mobile communication service has been started with the analog voice service. After this, the 2nd generation mobile communication service for short messages and digital voices has been developed. And, the 3rd generation service of low speed data and low quality videos has been realized in 2000s. The very high speed data service of LTE (long term evolution), which is the 4th generation mobile communication service standards, had been in July 2011. and the subscribers are increasing constantly. However, changes in communication technology, has given an economical cost to Smartphone users. Therefore, the purposes of this study was trending of the communication cost according to the change in the communication technology of the mobile communication industry.

• The KIPS Transactions:PartC
• /
• v.10C no.7
• /
• pp.943-954
• /
• 2003

The mobile telecommunication system has been growing exponentially after 1990s due to the high population in a city and the growth of mobile user. In this time, the current mobile system mainly concentrates on the voice communication. However, in the next generation, mobile users want to get very diverse services via mobile terminal such as the Internet access, web access, multimedia communication, and etc. For this reason, the next generation system, such as the UMTS (Universal Mobile Telecommunication Services) system, has to support the packet data service and it will play the major role in the system. By the way, since the Web service is based on TCP, most of the Internet traffic TCP traffic. Therefore, efficient transmission of TCP traffic will take very important role in the performance of packet data service. There are many researches about improving TCP performance over wireless network. In those schemes, the UMTS system adapts the link layer retransmission scheme. However, there are rarely studies about the exact performance of the link layer retransmission scheme in the face of dynamic changes of wireless environment over the UMTS system. The dynamic changes of wireless environment, such as wireless bandwidth, can degrade TCP performance directly. So, in this paper, we simulate and analyze the TCP performance in the UMTS system with dynamic wireless environments. Then, we propose a simple scheme for minimizing TCP performance degradation. As a result of simulation, we can find that when wireless environment is changed dynamically, the probability of TCP timeout is increased, and the TCP performance is degraded very much. In this situation, the proposed simple scheme shows good performance. It saves wireless resources and reduces the degradation of TCP performance without large overhead of the base station.

• The KIPS Transactions:PartD
• /
• v.17D no.2
• /
• pp.129-146
• /
• 2010

Nowadays, XML has been favored by many companies internally and externally as a means of sharing and distributing data. there are many researches and systems for modeling and storing XML documents by an object-oriented method as for the method of saving and managing web-based multimedia document more easily. The representative tool for the object-oriented modeling of XML documents is UML (Unified Modeling Language). UML at the beginning was used as the integrated methodology for software development, but now it is used more frequently as the modeling language of various objects. Currently, UML supports various diagrams for object-oriented analysis and design like class diagram and is widely used as a tool of creating various database schema and object-oriented codes from them. This paper proposes an Efficinet Query Modelling of XML-GL using the UML class diagram and OCL for searching XML document which its application scope is widely extended due to the increased use of WWW and its flexible and open nature. In order to accomplish this, we propose the modeling rules and algorithm that map XML-GL. which has the modeling function for XML document and DTD and the graphical query function about that. In order to describe precisely about the constraint of model component, it is defined by OCL (Object Constraint Language). By using proposed technique creates a query for the XML document of holding various properties of object-oriented model by modeling the XML-GL query from XML document, XML DTD, and XML query while using the class diagram of UML. By converting, saving and managing XML document visually into the object-oriented graphic data model, user can prepare the base that can express the search and query on XML document intuitively and visually. As compared to existing XML-based query languages, it has various object-oriented characteristics and uses the UML notation that is widely used as object modeling tool. Hence, user can construct graphical and intuitive queries on XML-based web document without learning a new query language. By using the same modeling tool, UML class diagram on XML document content, query syntax and semantics, it allows consistently performing all the processes such as searching and saving XML document from/to object-oriented database.