• Health Policy and Management
• /
• v.30 no.3
• /
• pp.418-429
• /
• 2020

Background: This study aims to analyze the cost and the length of stay (LOS) of acute myocardial infarction (AMI) patients with coronary artery stenting according to the characteristics of individuals and institutions. Methods: The data was collected from Korean National Health Insurance Service's customized database in 2010 and 2015. Chi-square test, t-test, analysis of variance, and multilevel analysis were performed. Results: The intraclass correlation coefficients for cost were 7.02% in 2010, 5.61% in 2015 and for LOS were 3.17%, 1.40%, respectively. The average costs were 9,067,000 won in 2010 and 9,889,000 won in 2015 (p<0.0001). However, the cost in 2015 was lower than the cost applying increased fee. The costs increased in aged 50-59 years, 60-69 years, and aged ≥70 years versus in aged under 49 years. The cost was higher in Charlson comorbidity index (CCI) 3 to 4 and ≥5 than in CCI 0. The costs were lower in male, medical aid recipients, metropolises, and local hospitals in other regions in 2010. LOS decreased from 8.1 days in 2010 to 7.4 days in 2015. It decreased in male, high income group, and the group of admission via emergency room. However, it increased in higher ages and medical aid recipients, and it also increased when CCI rose. The Internal Herfindahl Index was related to LOS in 2010. Conclusion: The variation of hospital level was small compared to the patient level. Therefore, it is important to implement applicable policies at the patient level in order to reduce cost and LOS of AMI patients.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.5
• /
• pp.892-897
• /
• 2007

This paper presents the output filter design and the output characteristic analysis by cut-off frequency set up of the LCR filter on NPC multi-level inverter with trap-filter. The single-phase NPC three-level inverter operates at low switching frequency. The proposed LC trap filter is comprised of a conventional LCR output filter, by using LC trap filter the need for high damping resistor and low LC cut-off frequency is eliminated. Also. low damping resistor is increased the output filter system. The multilevel inverter system used NPC type inverter in proper system for high power application and controller is used DSP(TMS320C31). The effectiveness of proposed system confirmed the validity through SPICE simulation and experimental results.

• Research in Community and Public Health Nursing
• /
• v.29 no.1
• /
• pp.21-32
• /
• 2018

Purpose: This study attempted to identify regional disparities of self-rated health among Korean wage workers and to investigate the influencing factors on them. Methods: The study subjects were 25,069 workers in 16 regions who were extracted from the 2014 Korean Working Condition Survey (KWCS). A multilevel analysis was conducted by building hierarchical data at individual and regional level. Results: In this study, 'financial autonomy rate' and 'current smoking rate' were identified as regional factors influencing the workers' self-rated health. When the socio-demographic and occupational factors of the workers were controlled, 'current smoking rate', a health policy factor, explained the regional disparity of workers' health status. Conclusion: We found that the health status of workers can be affected by the health behavior level of the whole population in their residential area. In order to improve the health status of working population and to alleviate their regional health inequalities, it is necessary to strengthen macro and structural level interventions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.8
• /
• pp.1874-1884
• /
• 1996

In this paper, we proposed automatic searching algorithm of thresholding value using multilevel thresholding for face segmentation from input bust image effectively. The proposed algorithm extracted the thresholding value of brightness that is formed background region, face region and hair region without illumination, background and face size from input image. The statistical projection analysis project the brightness of multilevel thresholding image into horizontal and vertical direction and decide the thresholding value of face. And the algorithm extracted elliptical type block of face from input image in order to reduce the back ground region and hair region efficiently. The proposed algorithm can reduce searching area of feature extraction and processing time for face recognication.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.11a
• /
• pp.323-330
• /
• 1999

The conventional analysis for the numerical computation of fluid film thickness with elastic deformation of contact region. is performed by Newton-Rephson method for its 18st convergence characteristics. However, both high load and relatively low sliding velocity frequently make it impossible for Newton-Rahpson method to get both converged and stable solutions. In particular, this method cannot provide converged Solution under the condition of high load above 1.0 GPa which frequently occurs in line contact of EHL problem. Multigird multi-level method for the solver of non-linear partial differential equation including solid deformation is preferred to Newton-Rshpson method for better convergence and stability and is applied to line contact EHL behavior in this study.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.8
• /
• pp.430-435
• /
• 2006

This paper presents a method about the efficiency analysis and the harmonic reduction of single phase NPC multi-level inverter with LC-trap filter and LCR output filter. The proposed LC-trap filter is comprised of a conventional LC output filter, by using LC-trap filter the need for high damping resistor and low LC cut-off frequency is eliminated. Also, low damping resistor is increased the efficiency of the output filter. Experimental verification of the proposed circuit is provided with single phase NPC multilevel inverter system and DSP controller.

• Journal of Power Electronics
• /
• v.15 no.3
• /
• pp.685-694
• /
• 2015

The power loss of the controllable switches in modular multilevel converter (MMC) HVDC transmission systems is an important factor, which can determine the design of the operating junction temperatures. Due to the dc current component, the approximate calculation tool provided by the manufacturer of the switches cannot be used for the losses of the switches in the MMC. Based on the enabled probabilities of each SM in an arm, the current analytical models of the switches can be determined. The average and RMS currents can be obtained from the corresponding current analytical model. Then, the conduction losses can be calculated, and the switching losses of the switches can be estimated according to the upper limit of the switching frequency. Finally, the thermal resistance model of the switches can be utilized, and the junction temperatures can be estimated. A comparison between the calculation and PSCAD simulation results shows that the proposed method is effective for estimating the junction temperatures of the switches in the MMC.

• Journal of Power Electronics
• /
• v.14 no.6
• /
• pp.1100-1108
• /
• 2014

Modular multilevel converters (MMCs) have emerged as the most promising topology for high and medium voltage applications for the coming years. However, one particular negative characteristic of MMCs is the existence of circulating current, which contains a dc component and a series of low-frequency even-order ac harmonics. If not suppressed, these ac harmonics will distort the arm currents, increase the power loses, and cause higher current stresses on the semiconductor devices. Repetitive control (RC) is well known due to its distinctive capabilities in tracking periodic signals and eliminating periodic errors. In this paper, a novel circulating current control scheme base on RC is proposed to effectively track the dc component and to restrain the low-frequency ac harmonics. The integrating function is inherently embedded in the RC controller. Therefore, the proposed circulating current control only parallels the RC controller with a proportional controller. Thus, conflicts between the RC controller and the traditional proportional integral (PI) controller can be avoided. The design methodologies of the RC controller and a stability analysis are also introduced. The validity of the proposed circulating current control approach has been verified by simulation and experimental results based on a three-phase MMC downscaled prototype.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.2
• /
• pp.70-78
• /
• 2012

Due to the variable nature of renewable energy resources and power demand by consumers, it is difficult to operate a power system installed with only one type of renewable energy resource. Grid-based renewable generation may be the only solution to overcome this problem. The conventional approach based on a low-voltage converter with power frequency transformer is commonly employed for grid connection of offshore renewable energy systems. Because of the heavy weight and large size of the transformer, the system can be expensive and complex in terms of installation and maintenance. In this paper, an 11-kV series connected H-bridge (SCHB) multilevel voltage source converter (VSC) is proposed to achieve a compact and light direct grid connection of renewable energy systems. This paper presents the design, simulation and analysis of a five level (5L)-SCHB and an eleven level (11L)-SCHB VSC for 11-kV grid-based renewable energy systems. The performance, cost, modulation scheme and harmonic spectra of the converter are analyzed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.3
• /
• pp.229-236
• /
• 2008

Recently, multilevel H-bridge inverters have become popular in medium to high power ac drive applications. One of significant advantages of them is low harmonic contents in their input line currents thanks to the transformer with multiple phase-shifted secondary windings. This paper attempts to provide basic guidelines for the design of the phase shifting transformer windings and theoretical analysis of input line current harmonics of H-bridge inverters. The part I provides the derivation of basic relationships between input and output current of the transformer and the relationship between the phase shifting characteristics and design aspects of the transformer.