• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.3
• /
• pp.397-406
• /
• 1999

A new solution procedure for approximate reanalysis, using the staged hybrid methods with substructuring, is proposed in this study. Displacements are calculated with two step mixed procedures. First step is to introduce the conservative approximation, which is a hybrid form of the linear and reciprocal approximation, as local approximation. In the next step, it is combined with the global approximation by reduced basis approach. Stresses are evaluated from the displacements by matrix transformation. The quality of reanalyzed quantities can be greatly improved through these staged hybrid approximations, specially for large changes in the design. Overall procedures are based on substructuring scheme. Several numerical examples illustrate the validity and effectiveness of the proposed methods.

• ETRI Journal
• /
• v.40 no.3
• /
• pp.396-409
• /
• 2018

Elliptic curve cryptography (ECC) can achieve relatively good security with a smaller key length, making it suitable for Internet of Things (IoT) devices. DNA-based encryption has also been proven to have good security. To develop a more secure and stable cryptography technique, we propose a new hybrid DNA-encoded ECC scheme that provides multilevel security. The DNA sequence is selected, and using a sorting algorithm, a unique set of nucleotide groups is assigned. These are directly converted to binary sequence and then encrypted using the ECC; thus giving double-fold security. Using several examples, this paper shows how this complete method can be realized on IoT devices. To verify the performance, we implement the complete system on the embedded platform of a Raspberry Pi 3 board, and utilize an active sensor data input to calculate the time and energy required for different data vector sizes. Connectivity and resilience analysis prove that DNA-mapped ECC can provide better security compared to ECC alone. The proposed method shows good potential for upcoming IoT technologies that require a smaller but effective security system.

• Korean Journal of Materials Research
• /
• v.25 no.9
• /
• pp.429-434
• /
• 2015

Resistance switching memory cells were fabricated using atomically dispersed Pt-$SiO_2$ thin film prepared via RF co-sputtering. The memory cell can switch between a low-resistance-state and a high-resistance-state reversibly and reproducibly through applying alternate voltage polarities. Percolated conducting paths are the origin of the low-resistance-state, while trapping electrons in the negative U-center in the Pt-$SiO_2$ interface cause the high-resistance-state. Intermediate resistance-states are obtained through controlling the compliance current, which can be applied to multi-level operation for high memory density. It is found that the resistance value is related to the capacitance of the memory cell: a 265-fold increase in resistance induces a 2.68-fold increase in capacitance. The exponential growth model of the conducting paths can explain the quantitative relationship of resistance-capacitance. The model states that the conducting path generated in the early stage requires a larger area than that generated in the last stage, which results in a larger decrease in the capacitance.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.3
• /
• pp.8-21
• /
• 2015

Technology for electric lighting has been evolving from Incandescent Lamp(IL) through Fluorescent Lamp(FL) and currently to Solid State Lighting(SSL) such as LED for more than 130 years of time. However, it took more than 100 years until the transition from IL to FL across overall society. That is because the transition is the Socio-Technical Transition(STT) which involves various social elements. This study investigated and analyzed the theories regarding STT, and applied the Multi-Level Perspective(MLP) theory to the case of electric lighting. A qualitative contents analysis was used with secondary data as research method, and the analyzed result was visualized based on the frame of MLP theory. The STT of electric lighting from IL to FL took place as the order of Technical Niche, Socio-Technical Regime and Landscape. Specifically, in Technical Niche level: Establishing Market Niche, Price-Performance Improvement, Learning Process and Support of Powerful Group took place. In Socio-Technical Regime level: Changes in Social Network, Changes in Technology and Changes in Rules. In Landscape level: Macro-Political Development, Socio-Economic Trends and Macro-Economic Trends took place in consecutive order.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.4
• /
• pp.291-297
• /
• 2012

Recently, Switching devices become cheaper, depending on the multi-level inverters are considered as the power-conversion systems for high-power and power-quality demanding applications. The multi-level inverters can reduce the THD(Total Harmonic Distortion) as the output which is similar sinusoidal waveform by synthesizing several capacitor DC voltages. However it has some disadvantages such as increased number of components, complex PWM control method. Therefore, this paper is proposed the new multi-level inverter topology using an new H-bridge output stage with a bidirectional auxiliary switch. The proposed topology is the 4-level 3-phase PWM inverter with less switching part than conventional multi-level inverters and reactive power control possible. In order to understand the new multi-level inverter, topology analysis and switching patterns and modes according to the current loop are described in this paper. The proposed multi-level inverter topology is validated through PSIM simulation and the experimental results are provided from a prototype.

• Journal of Korean Neurosurgical Society
• /
• v.49 no.5
• /
• pp.296-298
• /
• 2011

Spinal intradural cysticercosis is a rare manifestation of neurocysticercosis. We report a unique patient who showed visual symptoms and normal imaging of the brain caused by isolated spinal neurocysticercosis. A 59-year-old male patient was admitted to the emergency unit with a history of severe headache and progressive blurred vision. Brain computed tomographic scanning and magnetic resonance imaging showed normal cerebral anatomy without hydrocephalus. The fundoscopic evaluation by an ophthalmologist showed bilateral papilledema. Perimetry studies revealed visual field defects in both eyes. With the diagnosis of pseudotumor cerebri, a lumbar tap was attempted; however, we could not drain the cerebrospinal fluid in spite of appropriate attempts. Lumbar magnetic resonance imaging revealed multilevel intraspinal lesions that were confirmed histologically to be neurocysticercosis. An intraoperative lumbar puncture revealed an increased opening pressure and cytochemical analysis showed elevated cerebrospinal fluid protein level. The headache resolved immediately after surgery. However, the visual symptoms remained and recovered only marginally despite antihelminthic medications after six months of operation.

• Communications for Statistical Applications and Methods
• /
• v.25 no.2
• /
• pp.173-184
• /
• 2018

In medical or public health research, it is common to encounter clustered or longitudinal count data that exhibit excess zeros. For example, health care utilization data often have a multi-modal distribution with excess zeroes as well as a multilevel structure where patients are nested within physicians and hospitals. To analyze this type of data, zero-inflated count models with mixed effects have been developed where a count response variable is assumed to be distributed as a mixture of a Poisson or negative binomial and a distribution with a point mass of zeros that include random effects. However, no study has considered a situation where data are also censored due to the finite nature of the observation period or follow-up. In this paper, we present a weighted version of zero-inflated Poisson model with random effects accounting for variable individual follow-up times. We suggested two different types of weight function. The performance of the proposed model is evaluated and compared to a standard zero-inflated mixed model through simulation studies. This approach is then applied to Medicaid data analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.2
• /
• pp.120-126
• /
• 1988

In this paper the performance of the asynchronous Repeated FH/MFSK system for the CDMA(Code Division Multiple Access) was analyzed. Actually there was no difference in the probabilities of hit of frequency between Random Coding method and frequency hopping pattern vector suggested by Einarsso. Actual situation was adopted as a model in thie simulation, on the assumption thet;a:there was no Noise, Multipath propagation, b:there was only mutual interference. c:the number of users M was given. Also it was found that there is almost no deviation between the value calculated from the formula of word error probability expressed by bound and that obtained from this simulation.

• Computational Structural Engineering
• /
• v.7 no.1
• /
• pp.117-124
• /
• 1994

Multi-level Multi-objective optimization(MLMO) for reinforced concrete framed structure is performed, and compared with the results of single-level single-objective optimization. MLMO method allows flexibility to meet the design needs such as deflection and cost of structures using weighting factors. Using Multi-level formulation, the numbers of constraints and variables are reduced at each levels, and the optimization formulation becomes simplified. The force approximation method is used to reflect the variation in design variables between the substructures, and thus coupling is maintained. And the linear approximated constraints and objective function are used to reduce the number of structural analysis in optimization process. It is shown that the developed algorithm with move limit can converge effectively to optimal solution.

• Korean Journal of Health Education and Promotion
• /
• v.29 no.5
• /
• pp.61-75
• /
• 2012

Objectives: A great number of the elderly are not aware of having metabolic syndrome, and this pattern differs among regions of the nation. This issue is particularly important for the elderly people with chronic diseases. This study was conducted in order to identify the prevalence, predicting factors of perception and exercise behaviors of among the elderly population. Methods: Using data from the 2009 Korean Community Health Survey, we employed two-level logistic regression models to determine whether individual and community factors are associated with perception and exercise behaviors among the elderly population. Results: Results from weighted two-level logistic regression analyses indicated the individual-level factors of smoking, education level, health center education, community exercise program participation and unmet needs in men, and marital status (being separated), health center education women predicted the elders' perception. As for the community-level predictors, higher smoking and living in regions with high suicide rates significantly predicted the elders' perception and exercise behaviors of metabolic syndrome. Conclusions: These findings demonstrate that education according to stage would increase the perception and motivation toward healthier behavior particularly for the elderly with lower perception levels of metabolic syndrome.