• Laser Solutions
• /
• v.12 no.4
• /
• pp.1-5
• /
• 2009

Conventional patterning based on wet-process for multi-layered film is a relatively complex and costly process though it is a necessary step for fabrication of TFT-LCD module. Recently, a direct pattering by laser has been studied because it is low cost and simple process compared to the wet process. In this work, the selective removal process of multi-layered film (polyimide/indium tin oxide/glass) is studied by modeling the thermal and mechanical behavior for multi-layered structure. Especially, the effects of thickness of polyimide layer are examined.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.11
• /
• pp.1029-1032
• /
• 2006

Monolayers of lipids on a water surface have attracted much interest as models of biological membranes, but also as precursors of multilayer systems promising many technical applications. They exhibit very interesting physico-chemical properties as two-dimensional and interfacial systems. Until now, many potential methodologies have been developed in order to gain a better understanding of the relationship between the structure and function of the monolayers.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1469-1471
• /
• 1997

In this study, Organic electroluminescent(EU devices with multilayer structures were fabricated using tris (8-hydroxy quinolinate) aluminum($Alq_3$) as an electron-tran sporting emitting layer and TPD(N,N'-diphenyl-N,N'-bis(3-methylphenyl)-[1,1'-biphenyl]-4,4'-diamine : aromatic diamine) as a hole-transporting layer. A cell with a structure of glass substrate/indium-tin-oxide(ITO)/$Alq_3$/TPD/Mg:In exhibited bright green electroluminescence from the TPD layer. The peak intensity of TPD and $Alq_3$ different from spin coating and vacuum evaporation. The peak emission energy shifts to a higher energy with deposition technique. An emission peak at 500nm was achieved at a driving voltage of 30V.

• Journal of the Korean Ceramic Society
• /
• v.43 no.4 s.287
• /
• pp.253-258
• /
• 2006

In the lamination process of multi-layer ceramic modules, the occurrence of delamination comes into repeatedly. To completely improve the lamination process of LTCC sheets, a binder film was introduced between the layers. The binder film did not originate the delamination until the thickness under $40{\mu}m$. After lamination, the thickness of the binder film was determined by the infilteraion of binder by the pressure, and after the bake-out, was dependent on the decomposition of binder resin. Any detectable defect was not observed in the multilayer structure with Ag inner electrodes.

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.1
• /
• pp.41-44
• /
• 1999

Recently, high luminance and efficiency were realize in organic thin film electroluminescence (EL) cells with multilayer structures including an emitting layer (EML), hole transporting layer (HTL), and an electron transporting layer (ETL). In this study, Bis(10-hydroxybenzo[h]quinolinato)beryllium (Bebq2) was synthesized. PL and EL characteristics of their thin film were investigated by fabricating the devices having a structure of ITO/PVK/Bebq2/Al, ITO/PVK dispersed with TPD/Bebq2/Al. The EL color of these device was greenish and the wavelength of their EL peaks was located, respectly, at 495nm, and 492.5nm.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.11
• /
• pp.56-65
• /
• 1993

This paper presents the design consideration of the MFNNs(Multilayer Feed forward Neural Networks) based on the distribution of the given teching patterns. By extracting the feature points from the given teaching patterns, the structure of a network including the netowrk size and interconnection weights of a network is initialized. This network is trained based on the modified version of the EBP(Error Back Propagation) algorithm. As a result, the proposed method has the advantage of learning speed compared to the conventional learning of the MFNNs with randomly chosen initial weights. To show the effectiveness of the suggested approach, the simulation result on the approximation of a two demensional continuous function is shown.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.687-690
• /
• 2007

OLED devices with a multilayer structure were fabricated using newly synthesized hole transport materials. We confirmed that ELM229 and ELM339, hole transport materials did not affect the electroluminescence color, and that by adopting this novel hole transport materials, OLEDs with a lower driving voltage but a higher efficiency were developed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.9
• /
• pp.762-767
• /
• 2001

We report the white light emission from the multilayer organic electroluminescent(EL) device using exciplex emission. The exciplex at 500nm originated between poly(N-vinylcarvazole)(PVK) and 2,5-bis(5'-tert-butyl-2-benzoxazoly)thiophene(BBOT) and exciplex of 50nm originated from N,N'-diphenyl-N,N'-(3-methyphenyl)-1,1'-biphenyl-4,4'-diamine(TPD) and BBOT were observed. Also, the energy transfer from PVK to BBOT and poly(3-hexylthiophene)(P3HT) in mixed emitting materials was occurred. The electroluminescence(EL) spectra of organic EL device which have a device structure of ITO/CuPc(5nm)/emitting layer(100nm)/BBOT(30nm)/LiF(1.4nm)/Al(200nm) were slightly changed as a function of the applied voltage. The luminance fo 12.3 ${\mu}$W/$\textrm{cm}^2$ was achieved at 20V and EL spectrum measured at 20V corresponds to Commission Internationale de L\`Eclairage(CIE) coordinates of x=0.29 and y=0.353.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.8
• /
• pp.740-743
• /
• 2003

A multi-layer ceramic (MLC) chip type band-pass filter (BPF) is presented. The MLC chip BPF has the benefits of low cost and small size. The BPF consists of coulped stripline resonators and coupling capacitors. The BPF is designed to have an attenuation pole at below the passband for a receiver band of IMT-2000 handset. The computer-aided design technology is applied for analysis of the BPF frequency characteristics. The passband and attenuation pole depend on the coupling between resonators and coupling capacitance. The frequency characterics of the passband and attenuation pole are analyzed with the variation of the coupling between resonators and coupling capacitance. An equivanlent circuit and structure of MLC chip BPF are proposed. The frequency characteristics of the BPF is well acceptable for IMT-2000 application.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.1
• /
• pp.61-69
• /
• 2014

With the extreme ultraviolet (EUV) lithography, the performance limit of chemically amplified resists has recently been extended to 16- and 11-nm nodes. However, the line edge roughness (LER) and the line width roughness (LWR) are not reduced automatically with this performance extension. In this paper, to investigate the impacts of the EUVL mask and the EUVL exposure process on LER, EUVL is modeled using multilayer-thin-film theory for the mask structure and the Monte Carlo (MC) method for the exposure process. Simulation results demonstrate how LERs of the mask transfer to the resist and the exposure process develops the resist LERs.