• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.21-22
• /
• 2007

내환원성을 가지는 (Ca,Sr)(ZrTi)$O_3$계 C0G 원료와 코어 쉘 구조를 가지는 $BaTiO_3$계 X7R 원료를 적용하여 고압용 적층 칩 캐패시터를 제작하여 내부전극 형상 및 원료에 따른 신뢰성 밑 전기적 특성을 연구하였다. C0G 특성의 원료는 X7R 원료에 비해 단위 두께당 내전압이 감소하는 경향이 적었으며 내전압 특성도 우수하게 나타났다. 또한, 내부 전극 설계에 있어 floating에 따른 영향은 C0G, X7R 특성 원료 모두 향상된 전기적 특성과 신뢰성을 가짐을 확인 할 수 있었다.

• Journal of the Korean Ceramic Society
• /
• v.39 no.11
• /
• pp.1017-1022
• /
• 2002

$(Ba_{1-x}Ca_x)(Ti_{1-y}Zr_y)O_3(BCTZ)$ powders for the Ni-electrode Multilayer Ceramic Capacitor(MLCC) were synthesized via hydrothermal treatment using mixed aqueous solutions of $BaCl_2{\cdot}2H_2O,\Ca(NO_3)2{\cdot}4H_2O,\ ZrOCl_2{\cdot}8H_2O$ and $TiCl_4$. Two component and three component systems were also extensively studied for basic data. BT, CT and BZ powders were crystalline but CZ was determined to be amorphous under the same synthetic condition. In BTZ system, Zr and Ti were completely soluble and Ca would be substituted for Ba up to ∼6 mol% in BCT. The submicron-sized $(Ba_{0.95}Ca_{0.05})(Ti_{0.80}Zr_{0.20})O_3$ powder of the target composition was successfully synthesized at $150{\circ}$ for 12h.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.628-631
• /
• 2003

In this paper, 2.4 GHz WLAN BPF(Band Pass Filter) using LTCC(Low temperature cofiring ceramic) multilayer technology was simulated and manufactured. A modified ${\lambda}/4$ Hair-pin resonator with shunt-to ground loaded capacitor is used to shorten resonator length and improve circuit Q factor. Proposed BPF has a combline structure. Electro-magnetic Coupling between coupled strip-line resonators is controlled to provide attenuation poles at finite frequencies. The overall size of the filter is $3.2{\times}1.6{\times}1.3mm^3$. The measured result shows good agreement with simulated data.

• Journal of the Korean Ceramic Society
• /
• v.42 no.10 s.281
• /
• pp.649-653
• /
• 2005

A mono-disperse Ni powders for multilayer ceramic capacitors were prepared in a large scale by solution reduction method using $NiSO_{4}$ $N_{2}$$H_{4}$and NaOH. The exothermic reactions such as Ni-complex formation between highly concentrated $NiSO_{4}$ and $N_{2}$$H_{4}$ and the reduction of $Ni^{2+}$ into Ni provided thermal energy sufficient for spontaneous solution-reduction reaction. Because well-defined Ni particles could be prepared without external heating, the present method was named as 'auto-thermal method'. The formation of Ni­complex, the precipitation of $Ni(OH)_{2}$ gel triggered by NaOH addition, and its reduction into Ni by dissolution-recrystallization route were the reaction mechanism. The preparation of mono-disperse and spherical Ni powder was attributed to uniform distribution of reducing agent $N_{2}$$H_{2}$ within $Ni(OH)_{2}$ gel due to the decomposition of$NiSO_{4}$-$N_{2}$ $H_{4}$ complex.

• Journal of the Korean Ceramic Society
• /
• v.32 no.10
• /
• pp.1111-1116
• /
• 1995

To use dielectric material of high power multilayer capacitor, the composition of the commercial CaTiO3 was changed to decrease the sintering temperature, and the physical and electrical properties were investigated. Series of experiments showed that CaTiO3 with sintering additives had the highest density, the highest shrinkage, the lowest dielectric constant, the lowest loss factor, and the lowest temperature coefficient of capacitance (TCC). These properties had the constant values at sintering temperature of above 120$0^{\circ}C$.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2003.04a
• /
• pp.7-7
• /
• 2003

90년대 중반부터 이동통신제품과 인터넷의 대중화에 의한 노트북 PC등 휴대용 멀티미디어제품의 수요 급증은 전자 제품의 소형화 및 복합화를 유도하였으며, 이러한 제품의 추세에 대응하기 위하여 세라믹 부품은 벌크 단품에서 적층형으로 급속하게 바뀌고 있다. 이러한 정보기기의 좀 더 낳은 생산성과 효율을 얻기 위해 소형화, 경량화 및 고기능화의 요구에 대응되는 공정으로서 부품의 표면실장기술이 80년대에 실용화되었고, 이에 따른 칩 부품의 수요도 급격히 증가하고 있다. 대표적인 칩부품중의 하나인 MLCC(Multi Layer Ceramic Capacotor)는 전자제품의 소형경량화 및 대량생산과 더불어 필수적이 수소동자로써 지금까지 그 성장세는 휴대폰과 컴퓨터생산의 빠른 증가에 EK라 매년 약 15% 정도로 증가하고 있으며, 앞으로 그 수요는 더욱더 등가 할 것이다. EH한 고용량 영역까지 용량대를 확장함으로써, 탄탈 및 알루미늄 전해콘덴서의 영역까지도 확대 형성될 것으로 예상되고 있다. 본 강연에서는 MLCC의 제조기술 동향과 시장에 대한 전망에 대해 소개함으로써, 하루가 다르게 발전하고 있는 전자산업의 고용량화, 초소형화, 특수품, 복합화 등의 적층부품 전반의 현황 및 발전방향 파악하는데 조금이라도 도움이 되고자 한다.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.1
• /
• pp.39-43
• /
• 2009

In order to develop piezoelectric inverter module for CCFL driving, Rosen-type multilayer piezoelectric transformer was fabricated. The output power and efficiency of mutilayer piezoelectric transformer according to the variation inner electrode layer were investigated. Mutilayer piezoelectric transformer was fabricated conventional mutilayer ceramic method using PZT base ceramics. Also, piezoelectric inverter module was adopted driving circuit with half-bridge type. The piezoelectric inverter module was set up with input voltage 12.5 V, switching frequency 104.3 KHz. The results showed the value of step-up ratio 100, efficiency 87% at load resistance of $100k{\Omega}$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.751-755
• /
• 2003

In this paper, We proposed compact multi-layer LTCC (Low Temperature Cofired Ceramic) bandpass filter for Bluetooth module. A ${\lambda}/4$ coupled stripline resonators are designed, which composed of coupled strip-line section and loading capacitance. This resonator with a loading capacitor has slow-wave characteristics. Due to the slow-wave effect of the proposed resonator, it is possible to design and fabricate a compact bandpass filter with a wide upper stop band. Attenuation poles in the lower stop band are achieved using controlling of electro-magnetic coupling between resonators. Using multi-layer LTCC technology, we designed and fabricated band pass filter with a finite attenuation pole and wide upper stopband. The overall size of the filter is $1.2{\times}2.0{\times}1.0mm^3$.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.91-95
• /
• 2002

A very small size BPF is realized using LTCC Multilayer technology. A λ/4 resonator with shunt-to-ground loaded capacitor is used to shorten resonator length and achieve higher qualityfactor. Also this resonator enable BPF to improve out-of-band rejection. Coupling coefficients between coupled stripline resonators and external qualityfactor of a resonator are derived and apply to the filter design. The measured results show a good agreement with the simulation.

• Transactions on Electrical and Electronic Materials
• /
• v.1 no.3
• /
• pp.1-5
• /
• 2000

This paper presents a new sort of multilayer piezoelectric ceramic transformer for switching regulation power supplies. This piezoelectric transformer operate in the second thickness resonant vibration mode. Accordingly its resonant frequency is higher than 1 NHz, Because output power is low if input and output part of transformer are consisted of single layer, this research suggests a new method, which is consisted of both input and output part of transformer have 2-layered piezoelectric ceramics, The size of transformer is 20 mm in width and length, and 1.4 mm in thickness, respectively, To design a high efficient switching circuit of the transformer, internal circuit parameters were measured and then weve calculated a parameter of inductor nd capacitor to design a driving circuit, Weve used a MISFET and its driver circuit modified a calp oscillator circuit as the primary switching circuit.