• 한국지반공학회논문집
• /
• 제19권3호
• /
• pp.5-13
• /
• 2003

쏘일네일링 공법은 작업공간의 확보가 용이하고 네일길이가 어스앵커보다 비교적 짧아 도심지 지하굴착에 매우 이로운 장점이 있다. 이 공법이 도입된 이후 쏘일네일링 벽체의 거동에 관한 연구는 토조에 의한 모형실험과 이론적 연구가 진행되고 있지만 지반조건이 다층토로 구성된 현장에 대한 연구는 미흡한 실정이다. 본 연구는 국내 다층토 지반에 시공된 쏘일네일링 현장에서 시공중 측정된 수평변위를 토대로 한 역해석적 방법에 의해 배면지반의 이완영역거리와 이완영역계수를 고찰하였다. 연구결과에 의하면 쏘일네일링 벽체 배면지반의 이완 영역거리는 최종굴착깊이의 증가에 따라 증가함을 보였으며, 그 비율은 최종굴착깊이의 94% 정도로 나타났다. 토사층과 암층이 혼합되어 있는 다층토 지반에서 토사층의 비율이 클수록 이완영역계수도 증가하였으나, 약 1.05값에서 수렴하는 경향을 나타냈다. 벽체 최대수평변위에 대한 지표면 최대수직변위와의 관계는 역해석결과에서 지표면 최대수직변위가 최대수평변위의 80%이하로 나타났으며, Caspe방법에 의한 지표면 최대수직변위는 최대수평변위의 150~280%의 범위로 나타나 역해석결과보다는 매우 큰 값을 나타내 Caspe방법이 매우 보수적임을 확인하였다.

• Journal of Welding and Joining
• /
• 제34권2호
• /
• pp.16-21
• /
• 2016

Recent keywords of the heavy industries are large-scale structure and productivity. Especially, the sizes of the commercial vessels and the offshore structures have been gradually increased to deliver goods and explore or produce oil and natural gas in the Arctic. High heat input welding processes such as electro gas welding (EGW) have been widely used for welding thick steel plates with flux-cored arc welding (FCAW), especially in the shipbuilding industries. Because high heat input welding may cause the detrimental effects on the fracture toughness of the welded joint and the heat affected zone, it is essential to obtain the sufficient toughness of welded joint. There are well known that the fracture toughness like CTOD, CVN, and KIC were very important factors in order to secure the safety of the structures. Furthermore, the welding residual stress should be considered to estimate the unstable fracture in both EGW and FCAW. However, there are no references on the welding residual stress distribution of EGW and FCAW with thick steel plates. Therefore the welding residual stresses were very important elements to evaluate the safety of the welded structure. Based on the measurement results, the characteristics of residual stress distribution through thickness were compared between one-pass electron gas welding and multi-pass flux-cored arc welding. The longitudinal residual stress in the multi-pass flux-cored arc welding is tensile through all thicknesses in the welding fusion zone. Meanwhile, longitudinal residual stress of EGW is tensile on both surfaces and compressive at the inside of the plate. The magnitude of residual stresses by electron gas welding is lower than that by flux-cored arc welding.

• 한국산업정보학회논문지
• /
• 제17권7호
• /
• pp.1-8
• /
• 2012

본 논문에서는 유비쿼터스 환경 구축을 위한 센서 네트워크에서 효율적으로 데이터를 전송할 수 있는 멀티홉(multi-hop) 릴레이 (Relay) 전송 시스템을 고려한다. ISM 주파수 대역을 사용하는 DBO-CSS (Differentially Bi-Orthogonal Chirp Spread Spectrum) 방식의 확산대역 신호 중 하나인 첩 (Chirp) 신호를 이용하여 구축된 센서 네트워크를 기반으로 센서 거리 및 사물 위치인식을 위한 효율적인 릴레이 프로토콜을 제안한다. 효율적인 네트워킹 접속을 위하여 Zone information packet, Hop information packet, Tag information packet 및 Application serial packet 의 4종류의 패킷구조를 설계하여 구현하였으며, 구축된 센서 네트워크를 기반으로 사물의 위치인식의 효율성을 높이기 위한 구현 알고리즘을 제안하였다. 최종적으로 $15m{\times}15m$ 멀티셀 및 10 홉으로 구성된 테스트베드 시스템에서 제안한 프로토콜의 성능의 우수성을 검증한다.

• International Journal of Ocean System Engineering
• /
• 제2권3호
• /
• pp.160-169
• /
• 2012

Flux Cored Arc Welding (FCAW) is a common practice to join thick plates such as the structural members of large scale offshore structures and very large container ships. The objective of this study was to investigate the mechanical properties and variability of the fatigue crack initiation life in the flux cored arc welded API 2W Gr.50 steel joints typically applied to offshore structures with a focus on the effect of the materials in fatigue crack growth life from the notch root of a compact tension specimen. Offshore structural steel (API 2W Gr.50) plates (60-mm thick) were used to fabricate multi-path flux core arc welded butt welded joints to clearly consider fatigue fractures at the weld zone from the notch. Fatigue tests were performed under a constant amplitude cyclic loading of R = 0.4. The mean fatigue crack initiation life of the HAZ specimen was the highest among the base metal (BM), weld metal (WM), and heat affected zone (HAZ). In addition, the coefficient of variation was the highest in the WMl specimen. The variability of the short fatigue crack growth rates from the notch tips in the WM and HAZ specimens was higher than in BM.

• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 2002년도 한국해안해양공학발표논문집 Proceedings of Coastal and Ocean Engineering in Korea
• /
• pp.14-23
• /
• 2002

Wave breaking and breaking wave-induced hydrodynamics are very important subjects in the field of coastal and ocean hydrodynamics and engineering. In the coastal zone, a submerged breakwater has been increasingly popular, since it is one of nature-matching structures with multi- functions such as (1) wave energy dissipation by wave breaking and friction, (2) oxygen supply to sea by wave breaking and breaking wave, (3) water purification by entrained air bubbles, (4) keeping. good seascape. and (5) good habitat for sea livings. Recently, the breaking wave-induced high frequency pressure over a submerged breakwater is said to have a function of gathering sea livings around the structure, which has encouraged the construction of the submerged breakwater in coastal zone. (omitted)

• 한국지반공학회논문집
• /
• 제18권3호
• /
• pp.33-41
• /
• 2002

쏘일네일링 공법은 굴착이나 사면안정을 위해 가시설이나 영구용으로 국내에서 널리 이용되고 있다. 특히, 도심지 근접 굴착시 쏘일네일링 공법 적용시 고려사항은 벽체변위와 네일의 인장등 이다. 본 연구는 국내 여러 암반층을 포함하는 다층토 지반의 11개 쏘일네일링 현장에서 굴착단계별 네일의 인장력 거동을 계측자료와 역해석을 통하여 고찰하였다. 역해석 결과 네일의 최대인장력은 계측값의 50% 정도로 낮게 나타났고, 벽면에서 가상 파괴활동면까지의 거리를 주동영역거리라 할때 CLOUTERRE 보고서와 Cartier & Gigan이 각각 제안한 최종굴착 깊이(H$_{f}$ )의 0.3$H_f$,0.5$H_f$,에 비해 계측결과는 크게 나타났으며, 역해석은 이들이 제안한 범위내에 포함되었다.

• 한국해양공학회지
• /
• 제25권2호
• /
• pp.29-35
• /
• 2011

In order to effectively control waves in a coastal zone, Multi-Cylinder Piles have been suggested as economic structures. A numerical analysis was conducted using the Delft-3D: WAVE module based on SWAN, which considered wave shoaling and refraction. Moreover, irregular waves were used to investigate the hydrodynamic characteristics of the wave interaction with the structure. In this paper, a numerical analysis was carried out to research the effect of wave control through a wave height analysis concerning an existing, concrete wave breaker and multi-cylinder piles placed at the same location. As a result, the effect of the wave control is shown using the wave breaker, multi-cylinder piles, and existing data.

• Structural Engineering and Mechanics
• /
• 제59권6호
• /
• pp.1121-1137
• /
• 2016

A large number of structure in the world were build with poor seismic details, with or without any lateral load resisting system like concentrically braced frames and steel plate shear walls. These structures can reveal deteriorating hysteretic behaviors with stiffness and strength degradation. Therefore, seismic retrofitting of such structures for drift control has vital importance. In this study a retrofit methodology has been developed, which involves diagonal bracing of steel frames with different cable arrangements. In the experimental and numerical program 5 different lateral load resisting system were tested and results compared with each other. The results indicated that multi-cable arrangements suggested in this study showed stable ductile behavior without any sudden decrease in strength. Due to the usage of more than one diagonal cable, fracture of any cable did not significantly affect the overall strength and deformation capacity of the system. In cable braced systems damages concentrated in the boundary zones of the cables and beams. That is why boundary zone must have enough stiffness and strength to resist tension field action of cables.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.507-510
• /
• 2007

Piston cores retrieved from the western Ulleung Basin, East Sea were analyzed to examine the potential for hydrocarbon generation and to determine the hydrocarbon indicators. 2D multi-channel reflection seismic and Chirp data were also investigated for mapping and characterizing the geophysical hydrocarbon indicators such as BSR (bottom simulating reflector), blank zone, pock-mark etc. High organic carbon contents and sedimentation rates that suggest good condition for hydrocarbon generation. High pressure and low temperature condition, and high residual hydrocarbon concentrations are favor the formation of natural gas hydrate. In the piston cores, cracks generally oriented to bedding may indicate the gas expansion. The seismic data show several BSRs that are associated with natural gas hydrates and underlying free gas. A number of vertical to sub-vertical blank zones were well identified in the seismic sections. They often show the seismic pull-up structures, probably indicating the presence of high velocity hydrates. Numerous pockmarks were also observed in the Chirp profiles. They may indicate the presence of free gas below the hydrate stability zone as well.

• Journal of Welding and Joining
• /
• 제13권1호
• /
• pp.138-144
• /
• 1995

Recently, as the industrial structure tends to become large, the thickness of structural plate becomes thicker. Therefore, the thicker the plate of welded structure is, the larger the shape of welded joint. The effect of large heat input makes large heat affected zone(HAZ). These bring to complict welding residual stress and to weaken material, which may cause extremely harm to the safety of structures. Nevertheless, welding is design is regulated by the KS, JIS or standard in the resister of shipping such as KR, ABS or LR. However, these rules are based on rather experimental than theoretical. In this study, the computer program of heat conduction, considering un-steady state and quasi-steady state, is developed for optimizing(minimizing) a shape of welded joint. The characteristics of heat on the welded joints with various shapes are clarified by the results of the analyses.