• 스마트미디어저널
• /
• 제13권5호
• /
• pp.9-18
• /
• 2024

객체 궤적 모델링은 다중 객체 추적(Multi Object Tracking, MOT)의 주요 과제다. CenterTrack은 객체 중심 위치를 추적하는 Heatmap 기반의 방법으로 이를 해결하고자 했다. 하지만 복잡한 움직임과 비선형성을 가진 객체를 추적할 때 제한적인 성능을 보였다. 우리는 CenterTrack의 성능 저하 요인을 보행자의 동적 움직임으로 간주하여 확장된 칼만 필터(Extended Kalman Filter, EKF)를 CenterTrack에 통합했다. 우리가 제안하는 방법의 우수성을 입증하기 위해 기존 칼만 필터(Kalman Filter, KF)와 무향 칼만 필터(Unscented Kalman Filter, UKF)를 CenterTrack에 적용 후 다양한 데이터셋에 비교 평가했다. 실험결과, EKF를 CenterTrack에 통합했을 때 73.7% MOTA(Multiple Object Tracking Accuracy)를 달성하며 CenterTrack에 가장 적합한 필터임을 확인했다.

• 제어로봇시스템학회논문지
• /
• 제20권2호
• /
• pp.126-131
• /
• 2014

This paper is concerned with a track management method for a naval combat system which receives the tracks information from multi-sensors and multi-tactical datalinks. Since the track management of processing the track information from diverse sources can be formulated as a data fusion problem, this paper will deal with the data fusion architecture, track association and track information determination algorithm for the track management of naval combat systems.

• 분석과학
• /
• 제17권5호
• /
• pp.434-437
• /
• 2004

Alpha track technology can provide useful isotopic information of boron in the primary coolant water. In the quantitative analysis using the alpha track analysis, the shape or area of sample on the solid track detector becomes very important, especially for the analysis of liquid samples. In this research, a multi-dot plate has been developed for this purpose. The multi-dot plate provides fixed standard shape of the sample solution that stays inside of the printed circle, and consequently increases the reproducibility of the boron analysis.

• 한국군사과학기술학회지
• /
• 제15권4호
• /
• pp.513-518
• /
• 2012

In this paper, we proposed a method of fast track merging which is the foundation of track to track association technique. The existing method of track merging is performed throughout comparison between tracks to tracks. Therefore, it has heavy calculation time. In our research, we developed a method for fast clustering by using nearest neighbor measurement identification. The simulation results show that the proposed method is more faster than previous method about 3.3%. We expect that this method could be effectively used in multi-target tracking particularly in heavy clutter environment.

• 한국군사과학기술학회지
• /
• 제16권3호
• /
• pp.314-321
• /
• 2013

In this paper, we have proposed a method which can prevent data looping in multi tactical data-link operating situation. Because the situation of multi tactical data-link in Korea would be more complex than ever before, data looping is more likely to be happened. To prevent data looping, forwarder has to manage TQ(Track Quality) in forwarded track message by degrading it to enlarge correlation gate. Forwarder also has to discard useless track message which can be determined by minimum TQ value. To decide optimal formula for forwarder to degrade TQ and to determine minimum TQ, a research about track motion, correlation, TQ managing, etc in real system is necessary.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.162-166
• /
• 2011

In railway, Tie supports rail and plays a role that distribute train load to the ballast. Also, Tie and ballast resist against external force and fix the track position. But, weakening resistance of ballast and tie cause vertical displacement of tie and track irregularity. For reinforcement of track stiffness and reduction of track irregularity, KORAIL has developed Multi Branch type tie(GLORY Tie) that reinforced resistance than general PCT and installed in order to test in the field. This study measured and analyzed lateral resistance of ballast, wheel load of rail, bending strain of rail foot, vertical displacement and vibration acceleration of tie in order to evaluate performance of Multi Branch type tie in the field. According to the results of test, Multi Branch tie is excellent than general tie about lateral resistance of ballast and vertical displacement of tie. And, gap of measurement value between Multi Branch type tie and general tie about wheel load of rail, bending strain of rail foot were very small.

• 대한전기학회논문지
• /
• 제41권4호
• /
• pp.411-421
• /
• 1992

In the conventional track while scan (TWS) system, there are two major functions to be performed : detection and tracking. These two functions are normally designed and optimised independently. So TWS algorithm ignores the available decision features that can help in resolving the plot-to-track association ambiguity. Therefore conventional TWS system cna't track the targets in a densed multi-target environment. This paper presents a new TWS algorithm for multi-target track to solve the existing TWS system problem in clutter environment. The algorithm proposed in this paper is derived by modifying the part of joint probabilistic data association (JPDA) algotithm to get the one to one correspondence instead of multiple correspondence and combined with maneuvering detection logic so that it could also track the low maneuvering targets. Simulations to confirm the performance are done in crossing, parallel and maneuvering target. The proposed algorithm was successfully tracking targets above target situations.

• 제어로봇시스템학회논문지
• /
• 제16권11호
• /
• pp.1125-1135
• /
• 2010

A fundamental characteristic of PMHT (Probabilistic Multi-Hypothesis Tracker) is that the number of targets and initial states of targets in the surveillance area must be a priori known. This requirement is impossible to fulfil in almost every realistic scenario. In the paper, we present two track initiation methods to solve the problem. The proposed track initiation methods are 2-point track initiation and Hough transform track initiation, and they are used to evaluate track initial states and weights for FTD (False Track Discrimination) of the PMHT algorithm. Also suggested as automatic target detection for tracking systems that combines track initiation for target detection with the PMHT algorithm for target tracking in a cluttered environment. A series of Monte-Carlo simulation runs is employed to evaluate the overall system performance with the two track initiation methods and the results are compared and analyzed.

• Journal of Mechanical Science and Technology
• /
• 제14권10호
• /
• pp.1028-1040
• /
• 2000

A numerical method is presented for the dynamic analysis of military tracked vehicles of high mobility. To compute the impulsive dynamic contact forces which occur when a vehicle passes on a ground obstacle, the track is modeled as the combination of elastic links interconected by pin joints. The mass of each track link, the elastic elongation of a track link between pin joints by the track tension, and the elastic spring effects on the upper and lower surfaces of each track link have been considered in the equations of motion. And the chassis, torsion bar arms, and road wheels of the vehicle are modeled as the rigid multi bodies connected with kinematic constraints. The contact positions and the contact forces between the road wheels and track, and the ground and the the track are simultaneously computed with the solution of the equations of motions of the vehicle consisting of the multibodies. The iterative scheme for the solution of the multi body dynamics of the tracked vehicle is presented and the numerical simulations are conducted.

• 대기
• /
• 제25권2호
• /
• pp.375-387
• /
• 2015

A Selected Multi-model CONsensus (SMCON) technique was developed and verified for the tropical cyclone track forecast in the western North Pacific. The SMCON forecasts were produced by averaging numerical model forecasts showing low 70% latest 6 h prediction errors among 21 models. In the homogeneous comparison for 54 tropical cyclones in 2013 and 2014, the SMCON improvement rate was higher than the other forecasts such as the Non-Selected Multi-model CONsensus (NSMCON) and other numerical models (i.e., GDAPS, GEPS, GFS, HWRF, ECMWF, ECMWF_H, ECMWF_EPS, JGSM, TEPS). However, the SMCON showed lower or similar improvement rate than a few forecasts including ECMWF_EPS forecasts at 96 h in 2013 and at 72 h in 2014 and the TEPS forecast at 120 h in 2013. Mean track errors of the SMCON for two year were smaller than the NSMCON and these differences were 0.4, 1.2, 5.9, 12.9, 8.2 km at 24-, 48-, 72-, 96-, 120-h respectively. The SMCON error distributions showed smaller central tendency than the NSMCON's except 72-, 96-h forecasts in 2013. Similarly, the density for smaller track errors of the SMCON was higher than the NSMCON's except at 72-, 96-h forecast in 2013 in the kernel density estimation analysis. In addition, the NSMCON has lager range of errors above the third quantile and larger standard deviation than the SMCON's at 72-, 96-h forecasts in 2013. Also, the SMCON showed smaller bias than ECMWF_H for the cross track bias. Thus, we concluded that the SMCON could provide more reliable information on the tropical cyclone track forecast by reflecting the real-time performance of the numerical models.