• Journal of Soil and Groundwater Environment
• /
• v.15 no.5
• /
• pp.1-7
• /
• 2010

Electrokinetic technology was applied to remediate Cu, Pb and As-contaminated paddy soil. Removal of metal is highly dependent on the processing fluid during electrokinetic treatment. Tap water, NaOH, $HNO_3$, $Na_2EDTA$, and citric acid were evaluated as the processing fluids to enhance metal removal. Cu and Pb were transported toward cathode, however, it did not removed from soil section, while 56.6% of As was removed at a acidic condition. The strong acidic condition with nitric acid as a processing fluid enhanced the desoprtion of As from soil surface. However, longer operation time is needed to get the higher removal of Cu and Pb, and the acidification of soil after electrokinetic treatment should be solved.

• Journal of Powder Materials
• /
• v.21 no.1
• /
• pp.50-54
• /
• 2014

A powder-in-sheath rolling method was applied to a fabrication of a carbon nano tube (CNT) reinforced aluminum composite. A STS304 tube with an outer diameter of 34 mm and a wall thickness of 2 mm was used as a sheath material. A mixture of pure aluminum powders and CNTs with the volume contents of 1, 3, 5 vol was filled in the tube by tap filling and then processed to 73.5% height reduction by a rolling mill. The relative density of the CNT/Al composite fabricated by the powder-in-sheath rolling decreased slightly with increasing of CNTs content, but exhibited high value more than 98. The grain size of the aluminum matrix was largely decreased with addition of CNTs; it decreased from $24{\mu}m$ to $0.9{\mu}m$ by the addition of only 1 volCNT. The average hardness of the composites increased by approximately 3 times with the addition of CNTs, comparing to that of unreinforced pure aluminum. It is concluded that the powder-in-sheath rolling method is an effective process for fabrication of CNT reinforced Al matrix composites.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12A
• /
• pp.1978-1982
• /
• 2001

In a Multi-carrier modulation system, CP (Cyclic prefix) is inserted in the transmit tame in order to eliminate the ISI (Intersymbol Interference) and ICI (Interchannel Interference) caused by delay spread of a received signal, which in rum degrades the throughput of the system. TEQ (Time-domain equalizer) improves the system throughput by shortening the CIR (Channel Impulse Response) time and maintaining the CP length to the minimum regardless of the channel condition. In this paper, a new MMSE (Minimum Mean Square Error) TEQ algorithm is proposed and its performance is analyzed in order to speed up computing the optimum tap coefficients of the equalizer by employing Newton method.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1603-1605
• /
• 2001

Eight 300kJ modularized capacitor-banks have been constructed. These modules have been installed and assembled to make a 2.4MJ pulse power system (PPS). This 2.4MJ PPS was developed to be used as a driver of an electrothermal-chemical (ETC) gun. Each capacitor bank has six 22kV, 50kJ capacitors connected in parallel. A triggered vacuum switch (TVS-43) was adopted as a main pulse power-closing switch in each module. The module also contains a crowbar circuit made of three high-voltage diode-stacks, a multi-tap inductor and an energy-dumping resistor. Various current shapes have been formed by a sequential firing of multiple capacitor banks. Resistive dummy load has been used and various combinations of experimental parameters, such as charging voltage, trigger time and inductance, were tested to make flexible current shapes.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.7
• /
• pp.102-108
• /
• 2010

In this paper, we analyse the frequency diversity of BICM-OFDM with extended interleaving. The extended interleaving is an interleaving which is added to the existing BICM-OFDM system to extends the interleaving depth by times to the previous interleaving depth. Using the extended interleaving, the diversity order of the proposed system over -tap frequency selective channels is increased from min($d_{free}$, L) to min($d_{free}$, KL), where $d_{free}$ is minimum Hamming distance of the convolutional code. Simulation is also performed to show that the performance of the proposed system is better than that of the existing system even if the channel is an on-off channel in which the number of multi-paths is varying.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.240-243
• /
• 2001

As electronic industry and radio communication technologies progress, mankind enjoys its abundant life. On the other hand, it becomes possible that the electrical and electronic equipments are on light weight, small size, high speed, broad bandwidth, and operation by small energy. At the same time, many social problems like EMI/EMS by electromagnetic waves occur. Therefore, tile organizations such as CISPR, FCC, ANCI, etc., have provided the standards of electromagnetic wave environments for the countermeasure of the EMC. In this paper, we designed and studied a new EMI filter for multi-tap in the frequency band from 150 kHz to 30 MHz.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.10
• /
• pp.5-17
• /
• 1995

기계가공(Machining)중에서 가장 기본적인 것이 선삭(Turning)작업이며, 이 가공은 선반(Lathe)에 의해서 행하여지고 있는 것은 다 아는 사실이다. 공작기계의 발달과 금속 절삭 원리(Principles of metal cutting)는 선반을 중심으로 약 일세기동안 꾸준히 발전해 오고 있으며, 수없이 쏟아져 나온 연구논문들의 대부분이 선반에 의한 가공과 그 공작기계에 의해서 이루어졌으며 앞으로도 계속 보통선반, CNC선반의 토대 위에서 이루어지리라고 보고 있다. 공작기계 중에서 CNC 선반의 발달 과정을 요약해보면 1960년대의 대량 생산시대에는 Programmable control 방식의 자동 터렛트(Turret) 선반이 개발되어 생산 공정이 비교적 간단한 양산 가공기로서 환영을 받게 되었다. 1970년대에 들어서면서 다품종소량생산이 중요시되었고, 그때 NC 선반시대가 시작되었다고 볼 수 있다. 현 싯점에서 볼 때 이것은 중품종중량생산 이라고 말할 수 있으며, Turret 선반의 NC화 즉, Multi-tool에 의한 선반의 복합가공이 가능해졌지만 Tooling에 문제가 발생하였다. 1980년에 들어서 각종 MC 들이 광범위하게 발달, 보급되는 경향에 따라서 NC 선반도 고능률화의 일환으로 고속화와 더불어 회전공구인 End mill. Drill. Tap 등의 복합가공이 가능한 복합선반이 차례로 개발되었고 선삭공구와 회전공구등의 자동공구교환(Automatic Tool. Changing. ATC)이 가능해지고 Y축 보정(Co-mpensation)기구를 부착한 대형 Turning center가 개발되어 보급되게 되었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.12
• /
• pp.2686-2695
• /
• 1997

The MC-CDMA(multi-carrier code division multiple access) technique is known to be appropriate for high data-rate wireless communications such as mobile multimedia communication due to its robustness to multipath fading and its capability of handing high data rates with a simple one-tap equalizer. In this paepr, the performance of a MC-CDMA cellular system employing antenna arrays at the based station in a fading channel is presented. It is whown that the interference from other users within the cell can be significantly reduced for both reverse link (mobile to base station) and forward link (base station to mobile) using a MC-CDMA with antenna arrays, thus incresig the system's user-capacity. Computer simulations that demonstrate user-capacity improvement of the proposed approach are discussed.

• Journal of Environmental Science International
• /
• v.23 no.6
• /
• pp.1037-1047
• /
• 2014

A highly sensitive analytical method based on stir bar sorptive extraction (SBSE) technique and gas chromatography/tandem mass spectrometry (GC/MS-MS) has been developed, allowing the simultaneous multi-analyte determination of seven UV filters in water samples. The stir bar coated with polydimethylsiloxane (PDMS) was added to 40 mL of water sample at pH 3 and stirred at 1,100 rpm for 120 min. Other SBSE parameters (salt effect and presence of organic solvent) were optimised. The method shows good linearity (coefficients > 0.990) and reproducibility (RSD < 12.9%). The extraction efficiencies were above 84% for all the compounds. The limits of detections (LOD) and limits of quantification (LOQ) were 2.1~8.6 ng/L and 6.8~27.5 ng/L, respectively. The developed method offers the ability to detect 8 UV filters at ultra-low concentration levels with only 40 mL of sample volume. Matrix effects in tap water, river water, wastewater treatment plant (WWTP) final effluent water and seawater were investigated and it was shown that the method is suitable for the analysis of trace level of 7 UV filters except of benzophenone (BP). The method developed in the present study has the advantage of being rapid, simple, high-sensitive and both user and environmentally friendly.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.105-110
• /
• 2018

This paper compare the adaptive equalization performance of NM-MMA (Novel Mixed-MMA) algorithm which using the mixed const function by scaling factor values. The mixed cost function of NM-MMA composed of the appropriate weighted addition of gradient vector in the MMA and SE-MMA cost function, and updating the tap coefficient based on these function, it is possible to improve the convergence speed and MSE value of current algorithm. The computer simulation was performed in the same channel, step size, SNR environment by changing the scaling factor, and its performance were compared appling the equalizer output constellation, residual isi, MD, MSE, SER. As a result of computer simulation, the residual values of performance index were reduced in case of the scaling factor of MMA cost function was greater than the scaling factor of SE-MMA. and the convergence speed was improved in case of the scaling factor of SE-MMA was greater than the MMA.